COLORMATRIX SELECT WILL ENABLE: • Immediate visibility of color performance and cost data for multiple formulation options • On-demand color supply • Full color choice with no minimum order quantities • Shorter development lead times enabling faster market access and multiple product introductions • Assured global color consistency • All the performance and process efficiency advantages of ColorMatrix advanced liquid colorants MANUFACTURERS TAKE CONTROL OF YOUR COLOR SUPPLY For manufacturers who use ColorMatrix Select will be able to create and order color formulations online in minutes. CONVENTIONAL COLOR DEVELOPMENT PROCESS REDEFINED COLOR DEVELOPMENT Direct online access to create new colors or view multiple color formulations matching your specification Full visibility on color accuracy data performance, price and regulatory status Order samples for dispatch within 24 hours On-demand color supply for production Color Supplier Designer Brand Target samples/ Target samples/ Matches Trials Manufacturer ApprovalsApprovals Trials Designer BrandManufacturer ColorMatrix Select Color Supplier Designer Brand Target samples/ Target samples/ Matches Trials Manufacturer ApprovalsApprovals Trials Designer BrandManufacturer ColorMatrix Select Multiple rounds of sampling, trials and approvals, usually over many weeks COLORMATRIX ADVANCED LIQUID COLOR SYSTEMS Not all liquid colors are the same!

MAXXAM™ NHFR NON-HALOGEN FLAME RETARDANT POLYOLEFINS PRODUCT SELECTION GUIDE Maxxam™ NHFR Polyolefins – Homopolymers Disclaimer: The technical data provided here reflects the characteristic values of flame-retardant polypropylene materials and is not intended as a product specification. Product Name H15 H XF V2 70 MF5200-5004 NHFR V2 HS MF5200-5005 NHFR V2 RS H MF5200-5006 NHFR V2 RS HS H6 H XF H20 H XF H6 T/05 H XF H6 T/10 H XF H6 T/20 XF H6 GF/10 XF V070 H8 GF/20 XF H12 GF/25 H XF V0 70 H6 GF/30 XF PE H XF Polymer PP PE Flammability V2 V2 V2 V2 V0 V0 V0 V0 V0 V0 V0 V0 V0 V0 UL Listed No No No No No No No No No No No No No Yes Reinforcement Unfilled Unfilled Talc Talc Unfilled Unfilled Talc Talc Talc Glass Filled Glass Filled Glass Filled Glass Filled Unfilled Density (g/cm3) 1.03 0.9 0.98 1.05 1.07 1.06 1.08 1.15 1.16 1.11 1.25 1.32 1.35 1 MFI, 230°C/2.16 kg 13 20 23 20 5.5 20 6 6 6 6 7 12 5.5 E-Modulus (Tensile Modulus - Mpa) 1900 1500 2400 2600 2500 2500 2500 3000 3000 4300 6500 7500 8250 2000 Tensile Strength (Mpa) 25 30 32 30 26 20 26 25 23 55 70 75 78 20 Elongation (%)

The amounts and values for the facility(ies) identified below are accurate, based on reasonable estimates using available data.  The data for the facility(ies) that I represent are hereby submitted to the programs identified below using the Single Window Reporting Application. I also acknowledge that the data will be made public.

K58220T N/A Kevlar® 2480 LBs (1125 KGs) 230 FT/LB (154 M/KG) Flat 2.81 mm N/A Strength member in cable application Product ID Polymer Jacket Base Fiber Break Yield Geometry Nominal Diameter Description 13.75mm K/Hytrel Hytrel Jacket Kevlar® 29000 LBs (13154 KGs) 138 KGs/KM Round 13.75mm Kevlar rope w/ Hytrel 12.5mm K/TPU TPU jacket Kevlar® 24000 LBs (10885 KGs) 115 KGs/KM Round 12.5mm Kevlar rope w/ Hytrel 7.87mm K/MDPE MDPE Jacket Kevlar® 24000 LBs (10885 KGs) 50 KGs/KM Round 7.87mm Kevlar w/ MDPE .58mm C/PU TPU jacket Carbon 74 LBs (33.6 KGs) N/A Round/ Flat .58mm Carbon w/ TPU 4.50mm K/HDPE HDPE jacket Kevlar® 2000 LBs (907 KGs) 16 KGs/KM Round 4.06 mm Kevlar w/ HDPE POPULAR JACKETED STRENGTH MEMBERS This data is provided for informational purposes only, and does not constitute a specification. Uranusweg 3 8938 AJ Leeuwarden The Netherlands +31(0) 58 216 75 99 info@fiber-line.com ABOUT FIBER-LINE® NOTICE: The information and data contained herein do not constitute sales specifications.

Gasoline - 30% glass-filled (GF) grade, dry as molded (DAM), room temperature Testing methodology is an adaptation from ASTM D543 • Reapply freshly soaked gauze pad every 24 hours to prevent from drying out • Repeat for a total of 72 hours • Tensile properties recorded *Chemical resistance data for DEET, motor oil, glass cleaner, and sunscreen available upon request KEY CHARACTERISTICS Figure 1 Figure 2 3.34 3.84 3.63 1.96 2.21 0.99 3.43 3.86 3.93 1.76 3.49 2.01 3.26 3.66 3.74 1.45 1.06 0.989 2.98 3.99 3.41 1.41 1.07 0.88 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 30% LGF PKE 30% LGF PA6 30% LGF PA66 30% SGF PKE 30% SGF PA6 30% SGF PA66 Ft -lb /in Notched Izod Impact ASTM D256 23C DAM 23C Conditioned -40C DAM -40C Conditioned 1.47 1.37 1.37 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Glass-Filled PKE Glass-Filled PA6 Glass-Filled PA66 g/ cm 3 Density of Polyketone vs Nylon ASTM D792 LESS MOISTURE ABSORPTION THAN NYLON 30% Short Glass Fiber (SGF) Comparison Moisture uptake, environmental chamber 62% RH, 70°C SIMILAR DENSITY TO NYLON ASTM D792 COMPARABLE AND CONSISTENT IMPACT PERFORMANCE* Notched Izod Impact (ASTM D256) of LGF and SGF for DAM and Conditioned Materials *3,000 hr weathering data available upon request KEY CHARACTERISTICS 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Highly flame retardant—helps to prevent a fire, or limit the damage if one starts • Non-halogenated—in the case of a fire, there are no acid gas emissions which can damage equipment and buildings • Low smoke—in the event of fire, people can locate escape routes, and fire fighters can quickly find the source of the fire • Low toxicity—in the event of a fire, people are not overcome by toxic fumes • Low dripping—no flaming droplets which can further propagate the fire or cause injury • Low emission of corrosive gases when burned—avoids potential damage to electrical components and equipment, and improves human safety MARKETS AND APPLICATIONS The ECCOH XL 8001 is a flame retardant material for thermoset cable insulation.

GLS automotive TPEs are designed to improve driver and passenger safety and comfort.

APPLICATIONS: Power cables, Ethernet category cables, industrial cables, solar installation cables, coaxial cables, fiber optics, hybrid cables SYNCURE™ Cross-Linked Polyethylene for Power Cable Insulation • Resistant to heat, oil, creep and abrasion • Fast extrusion speeds • UL 44 & UL 4703 flame performance • UL/CSA bulletins MAXXAM™ FR W&C Flame Retardant Polypropylene for Category Cable Insulation and Cross-Webs • Alternative to FEP • Low dielectric • Thin wall extrusion capabilities • UL 444 & plenum yellow card flame performance FIRECON™ Flame Retardant Chlorinated Polyethylene for Industrial Cable Jackets • Resistance to harsh environments • Low temperature properties • UV resistance • UL 44 flame performance ECCOH™ LSFOH Low Smoke and Fume, Non-Halogen for Insulation and Jackets • Low smoke and toxicity • Improved fire safety • Resistance to chemicals • UL44 and CPR flame performance ADDITIONAL SOLUTIONS MAXXAM™ SY Foamed Polypropylene for Coaxial Cable Insulation SYNPRENE™ Flame Retardant Thermoplastic Elastomers POLYMIX™ Customer Proprietary Formulations For more information, please visit avient.com or call +1.844.4AVIENT (+1.844.428.4368).

Spills lead to messy mixer areas which can create safety issues and take hours to clean.

FIBER-LINE™ High Performance Synthetic Fibers PRODUCT SELECTION GUIDE FIBER-LINE™ HIGH PERFORMANCE SYNTHETIC FIBERS Kevlar® Para-Aramid Nomex® Meta-Aramid Vectran® LCP Zylon® PBO Carbon Fiber UHMWPE PET Polyester Fiberglass Novoloid Technora® Filament Yarn TECHNICAL PROPERTIES Standard High Modulus Standard Standard High Standard High Standard Standard High High Tenacity Low Shrink E-Glass S-Glass Standard Standard Breaking Tenacity (g/d) 23.0 23.6 5.0 23.0 30.0 42.0 42.0 23.0 28.0 38 9.3 8.4 6.0 - 7.3 6.7 - 9.4 1.5 28.0 Specific Gravity (Ratio) 1.44 1.44 1.38 1.40 1.40 1.54 1.56 1.80 0.97 0.97 1.38 1.38 2.58 2.48 1.27 1.39 Elongation at Break (%) 3.5 2.5 30.0 3.8 2.8 3.5 2.5 1.5 3.5 3.1 14.6 19.5 3.5 5.5 30.0 - 40.0 4.6 Tensile Modulus (g/d) 555 885 125 600 830 1200 1800 1480 850 1250 120 70 200–275 140–170 2.5–5.0 590 Equilibrium Moisture Regain at 55% RH (%) 5.0 5.0 4.5