DYNAFLEX(TM) G2706-1000-00 PP FR 8-6 LMS-1000

DYNAFLEX(TM) G2706-1000-00 SQR05 PP FR 8-6 LMS-1000

DYNAFLEX(TM) G2706-1000-00 P PP FR 8-6 LMS-1000

Peel, PLI 12 19 23 20 19 reSound OM 5510 for PP reSound OM 5510-60N Room Temperature 70C Bio-derived Content (%) 50% 50% 50% 50% 50% 50% 50% Hardness, Shore A 60 60 60 60 60 60 60 Specific Gravity 0.89 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 247 241 244 251 234 244 240 100% Modulus, PSI 343 333 338 339 321 331 326 Tensile Strength, PSI 625 621 647 610 633 662 642 Elongation, % 306 314 309 313 312 315 315 Tear Strength, PLI 109 108 113 113 111 117 115 reSound OM 5520-55N Room Temperature 70C Bio-derived Content (%) 49% 49% 49% 49% 49% 49% 49% Hardness, Shore A 54 54 55 55 54 55 56 Specific Gravity 0.95 0.95 0.96 0.96 0.95 0.96 0.96 50% Modulus, PSI 258 256 256 265 266 271 257 100% Modulus, PSI 353 355 357 362 373 379 367 Tensile strength, PSI 637 615 637 669 651 674 642 Elongation, % 319 315 319 333 313 319 315 Tear Strength, PLI 146 136 133 142 137 138 141 reSound OM 5510-45N Room Temperature 70C Bio-derived Content (%) 40% 40% 40% 40% 40% 40% 40% Hardness, Shore A 45 46 47 46 46 45 45 Specific Gravity 0.88 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 153 158 154 162 137 136 133 100% Modulus, PSI 251 259 259 261 226 222 218 Tensile Strength, PSI 438 481 451 495 417 470 486 Elongation, % 215 240 211 243 204 227 238 Tear Strength, PLI 84 81 87 82 83 85 84 AGING – PROPERTY RETENTION • Tested at room temperature and 70° C for comparison • Hardness, tensile strength elongation and modulus showed great retention Overmolding onto PP Overmolding onto ABS RHEOLOGY Suitable for injection molding and overmolding 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5520-55N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s Capillary viscosity at 200°C Capillary viscosity at 200°C reSound OM 5510 for PP reSound OM 5520 for ABS www.avient.com Copyright © 2020, Avient Corporation.

XAS-1000 AS CLEAR Dynaflex X-G7410-1000-00 PP FR 8-6 LMS-1000

DYNAFLEX(TM) G7410-1000-00 NATURAL PP FR 8-6 LMS-1000

10:00 a.m.

KEY PERFORMANCE PROPERTIES1 PHYSICAL NOMINAL VALUE UNIT TEST METHOD Density/Specific Gravity 1.00 ASTM D792 Melt Mass-Flow Rate (MFR) (230°C/2.16kg) 20 g/10 min ASTM D1238 MECHANICAL Tensile Strength 15.0 MPa ASTM D638 Flexural Modulus 1400 MPa ASTM D790 Flexural Strength 35.0 MPa ASTM D790 IMPACT Notched Izod Impact (Injection Molded) 150 J/m ASTM D256 ELECTRICAL Surface Resistivity < 100000 ohms/sq ASTM D257 PROCESSING INFORMATION INJECTION NOMINAL VALUE UNIT Drying Temperature 80 to 90 °C Drying Time 4.0 to 6.0 hr Processing (Melt) Temperature 220 to 250 °C Mold Temperature 30 to 80 °C Trilliant™ HC Electrically Conductive Formulations for Precision Performance Pipette Tips A critical design consideration for pipette tips is the accurate measurement of finite amounts of liquid.

On Tuesday May 21 at 10:00 am, John Scoarste, senior application development manager at PolyOne, will present, “Thermoplastic Elastomer Healthcare Material Selection – It Is More Than Just Materials.”

关键性能 加工信息 1 1 物理性能 标称值 标称值 单位 测试法 1.00 ASTM D792 20 g/10 min ASTM D1238 抗拉强度 密度/比重 熔指 (MFR) (230°C/2.16kg) 15.0 MPa ASTM D638 1400 MPa ASTM D790 35.0 MPa ASTM D790 150 J/m ASTM D256 < 100000 ohms/sq ASTM D257 80 to 90 °C 4.0 to 6.0 hr 220 to 250 °C 30 to 80 °C 机械 弯曲模量 弯曲强度 悬臂梁缺口冲击强度（注塑样条） 冲击 电气 表面电阻率 干燥温度 注塑 干燥时间 加工（熔化）温度 模具温度 主要性能：不能被解释为技术指标 单位 Trilliant HC™ 方案如何协助攻克严苛的性能和工艺挑战 www.avient.com 版权所有©2022 埃万特公司。