Formulated to achieve a negative, neutral or low product carbon footprint (PCF), this reSound™ thermoplastic elastomer series offers an industry-first cradle-to-gate PCF range between -0.46 and -0.02 in kg CO2 equivalent kg/ product.

USES & APPLICATIONS FOAM CORE PANELS Core Density 5 lb/ft3 8 lb/ft3 80 kg/m3 130 kg/m3 Panel Thickness 0.5 inch 0.75 inch 1.0 inch 0.5 inch 0.75 inch 1.0 inch 13mm 19mm 25mm 13mm 19mm 25mm Facesheet Configuration 5848 Quad-Ply 5848 Quad-Ply Property Test Method Unit Areal Weight Calculated lb/ft2 kg/m2 0.83 4.05 0.93 4.54 1.04 5.08 0.96 4.69 1.13 5.52 1.31 6.40 Flexural Strength ASTM D7249 psi MPa 104 0.72 112 0.77 102 0.70 168 1.16 171 1.18 172 1.19 Flexural Modulus ASTM D7249 psi MPa 834,000 5,750 605,000 4,171 375,000 2,586 889,000 6,129 672,000 4,633 481,000 3,316 Flexural Rigidity ASTM D7249 lb*in2 kN*mm2 33,000 95,000 64,000 183,000 100,000 286,000 42,000 120,000 71,000 203,000 126,000 361,000 TRUCK & RV • Ceilings • Cabinetry • Load floors • Sidewalls • Aerodynamic components BUILDING & CONSTRUCTION • Modular panels for temporary structures • Garage & industrial doors • Walls & flooring RAIL • Doors • Flooring • Interior panels MARINE • Stringers • Bulkheads • Ceilings & decking • Doors & cabinetry HONEYCOMB CORE PANELS Core Density 5 lb/ft3 80 kg/m3 Panel Thickness 0.5 inch 1.0 inch 13mm 25mm Facesheet Configuration 6536 X-Ply 6536 Tri-Ply 6536 X-Ply 6536 Tri-Ply Property Test Method Unit Areal Weight Calculated lb/ft2 kg/m2 0.49 2.39 0.63 3.08 0.63 3.08 0.8 3.91 Flexural Strength ASTM D7249 psi MPa 33 0.23 82 0.57 46 0.32 97 0.67 Flexural Modulus ASTM D7249 psi MPa 418,000 2,882 693,000 4,778 265,000 1,827 368,000 2,537 Flexural Rigidity ASTM D7249 lb*in2 kN*mm2 15,000 43,000 27,000 77,000 41,000 117,000 75,000 215,000 SUPPORT SPAN DEFLECTION Meets performance required for marine applications Predictive deflection in various load cases. TAB TESTING OF VARIOUS INSTALLATION METHODS Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEGLENGTH BREAK STRENGTH PETG Skins with Plywood Core 1 in/25 mm 1.5 in/38 mm 2 in/51 mm 2400 lbs/1089 kg 2820 lbs/1279 kg 2748 lbs/1246 kg Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density 2 in 51 mm 665 lbs 302 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density 2 in 51 mm 881 lbs 400 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density 2 in 51 mm 1084 lbs 492 kg Marine Plywood 2 in 51 mm 770 lbs 349 kg Glass/Epoxy with Plywood Core 2 in 51 mm 1055 lbs 479 kg Glass/Polyester with Balsa Core 2 in 51 mm 919 lbs 417 kg L-Bracket Installation Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEGLENGTH BREAK STRENGTH PETG Skins with Plywood Core 2 in 51 mm 2375 lbs 1077 kg Marine Plywood 2 in 51 mm 770 lbs 349 kg Glass/Polyester with Balsa Core 2 in 51 mm 797 lbs 362 kg U-Channel Installation ITW Plexus MA420 adhesive was used in all tab testing installations except where noted. G LA SS /E P O XY T AB M AT ER IA L N O T AB BOTTOM PANEL LEGLENGTH BREAK STRENGTH Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density 2 in 51 mm 420 lbs 191 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density 2 in 51 mm 370 lbs 168 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density 2 in 51 mm 332 lbs 151 kg Marine Plywood 2 in 51 mm 984 lbs 446 kg Glass/Polyester with Balsa Core 2 in 51 mm 1298 lbs 589 kg Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 501 lbs 227 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 839 lbs 381 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 1156 lbs 524 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - Crestomer 1152PA Adhesive NA 1530 lbs 694 kg Hammerhead with 8 lb/in3 (135 kg/m3) Core Density - Crestomer M1-30 Adhesive NA 1471 lbs 667 kg Mixed Conditions ADHESIVE DESCRIPTION ADHESIVE GRADE MANUFACTURER AVERAGE BOND STRENGTH STANDARD DEVIATION FAILURE MODE BEST ADHESION 2k Urethane 75421 LORD 2281 psi 15.73 MPa 184 psi 1.27 MPa Substrate Cohesive 2k Acrylic SA1-705 GRY1 ACRALOCK 2211 psi 15.24 MPa 78 psi 0.54 MPa Substrate 2k Acrylic Plexus MA420 ITW 2171 psi 14.97 MPa 262 psi 1.81 MPa Substrate 2k Acrylic SA10-05 Blk1 ACRALOCK 2102 psi 14.49 MPa 138 psi 0.95 MPa Substrate 2k Urethane 75451 LORD 2047 psi 14.11 MPa 68 psi 0.47 MPa Cohesive 2k Acrylic SA1-705 GRY 1:1 ACRALOCK 1966 psi 13.56 MPa 68 psi 0.47 MPa Substrate 2k Acrylic Scotch-Weld 8010 3M 1907 psi 13.15 MPa 61 psi 0.42 MPa Adhesive Cyanoacrylate Gorilla Glue Gorilla Glue 1885 psi 13.00 MPa 432 psi 2.98 MPa Cohesive 2k Acrylic Crestabond PP-04 Scott Bader 1873 psi 12.91 MPa 281 psi 1.94 MPa Substrate 2k Acrylic SA10-05 Blk 10:1 ACRALOCK 1779 psi 12.27 MPa 127 psi 0.88 MPa Cohesive 2k Urethane 75422 LORD 1716 psi 11.83 MPa 190 psi 1.31 MPa Cohesive Adhesive 2k Urethane 75452 LORD 1535 psi 10.58 MPa 98 psi 0.68 MPa Adhesive 2k Methacrylate PolyFuse Icon Containment 1610 psi 11.10 MPa 98 psi 0.68 MPa Adhesive INTERMEDIATE ADHESION 2k Acrylic FA10-05 Blk C010817 ACRALOCK 724 psi 4.99 MPa 58 psi 0.40 MPa Cohesive 2k Acrylic FA10-05 Blk1 ACRALOCK 722 psi 4.98 MPa 44 psi 0.30 MPa Cohesive 2k Epoxy Loctite Epoxy Instant Mix Loctite 508 psi 3.50 MPa 81 psi 0.56 MPa Adhesive 2k Epoxy Gorilla Epoxy Gorilla Glue 341 psi 2.35 MPa 198 psi 1.37 MPa Adhesive NOT RECOMMENDED 2k Epoxy Loctite Epoxy Marine Loctite 0 0 No bond ADHESIVE SELECTION Brand names of the adhesives are owned by the respective manufacturers.

2.7 lb/ft² 13.2 kg/m² 4.0 lb/ft² 19.5 kg/m² 65 ksi, 448 MPa

Stringers Bulkheads, Decking and Transoms Doors and Cabinetry Ceilings and Hatches MECHANICAL PERFORMANCE Superior strength-to-weight ratio PROPERTY TEST METHOD PANEL THICKNESS .50" .75" 1.00" 13 mm 19 mm 25 mm Core Density* ISO 845 7 lb/ft3 7 lb/ft3 7 lb/ft3 115 kg/m3 115 kg/m3 115 kg/m3 Flexural Rigidity ASTM D7249 35,000 lb/in2 10.3 kg/m2 75,000 lb/in2 21.9 kg/m2 118,000 lb/in2 34.5 kg/m2 Areal Weight Calculated 0.89 lb/ft2 4.3 kg/m2 1.03  lb/ft2 5.0 kg/m2 1.17  lb/ft2 5.7 kg/m2 Core Shear Yield ASTM C393 101 psi 0.70 MPa 96 psi 0.66 MPa 88 psi 0.61 MPa Max Load ASTM C393 357.5 lbs 162.2 kg 513.4 lbs 232.9 kg 551.1 lbs 250.0 kg Core Shear ULT ASTM C393 113 psi 0.78 MPa 109 psi 0.75 MPa 94 psi 0.65 MPa Face Bend Stress ASTM C393 9,008 psi 62.11 MPa 8,725 psi 60.16 MPa 7,542 psi 52.00 MPa USES & APPLICATIONS * Additional core density panels are available in 5 lb/ft3 (80 kg/m3) and 8 lb/ft3 (135 kg/m3). Example: Deflection for 24 inch panel = Chart value *[12 / 24] Performance Comparison Hammerhead Panels and Marine Plywood TAB TESTING OF VARIOUS INSTALLATION METHODS Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEGLENGTH BREAK STRENGTH PETG Skins with Plywood Core 1 in/25 mm 1.5 in/38 mm 2 in/51 mm 2400 lbs/1089 kg 2820 lbs/1279 kg 2748 lbs/1246 kg Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density 2 in 51 mm 665 lbs 302 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density 2 in 51 mm 881 lbs 400 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density 2 in 51 mm 1084 lbs 492 kg Marine Plywood 2 in 51 mm 770 lbs 349 kg Glass/Epoxy with Plywood Core 2 in 51 mm 1055 lbs 479 kg Glass/Polyester with Balsa Core 2 in 51 mm 919 lbs 417 kg L-Bracket Installation Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEGLENGTH BREAK STRENGTH PETG Skins with Plywood Core 2 in 51 mm 2375 lbs 1077 kg Marine Plywood 2 in 51 mm 770 lbs 349 kg Glass/Polyester with Balsa Core 2 in 51 mm 797 lbs 362 kg U-Channel Installation ITW Plexus MA420 adhesive was used in all tab testing installations except where noted. G LA SS /E P O XY T AB M AT ER IA L N O T AB BOTTOM PANEL LEG LENGTH BREAK STRENGTH Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density 2 in 51 mm 420 lbs 191 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density 2 in 51 mm 370 lbs 168 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density 2 in 51 mm 332 lbs 151 kg Marine Plywood 2 in 51 mm 984 lbs 446 kg Glass/Polyester with Balsa Core 2 in 51 mm 1298 lbs 589 kg Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 501 lbs 227 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 839 lbs 381 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 1156 lbs 524 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - Crestomer 1152PA Adhesive NA 1530 lbs 694 kg Hammerhead with 8 lb/in3 (135 kg/m3) Core Density - Crestomer M1-30 Adhesive NA 1471 lbs 667 kg Mixed Conditions ADHESIVE DESCRIPTION ADHESIVE GRADE MANUFACTURER AVERAGE BOND STRENGTH STANDARD DEVIATION FAILURE MODE BEST ADHESION 2k Urethane 75421 Lord 2281 psi 15.73 MPa 184 psi 1.27 MPa Substrate Cohesive 2k Acrylic SA1-705 GRY1 AccraLock 2211 psi 15.24 MPa 78 psi 0.54 MPa Substrate 2k Acrylic Plexus MA420 ITW 2171 psi 14.97 MPa 262 psi 1.81 MPa Substrate 2k Acrylic SA10-05 Blk1 AccraLock 2102 psi 14.49 MPa 138 psi 0.95 MPa Substrate 2k Urethane 75451 Lord 2047 psi 14.11 MPa 68 psi 0.47 MPa Cohesive 2k Acrylic SA1-705 GRY 1:2 AccraLock 1966 psi 13.56 MPa 68 psi 0.47 MPa Substrate 2k Acrylic Scotchweld 8010 3M 1907 psi 13.15 MPa 61 psi 0.42 MPa Adhesive Cyanoacrylate Gorilla Glue Gorilla Glue 1885 psi 13.00 MPa 432 psi 2.98 MPa Cohesive 2k Acrylic Crestabond PP-04 Scott Bader 1873 psi 12.91 MPa 281 psi 1.94 MPa Substrate  2k Acrylic SA10-05 Blk 10:2 AccraLock 1779 psi 12.27 MPa 127 psi 0.88 MPa Cohesive 2k Urethane 75422 Lord 1716 psi 11.83 MPa 190 psi 1.31 MPa Cohesive Adhesive 2k Urethane 75452 Lord 1535 psi 10.58 MPa 98 psi 0.68 MPa Adhesive 2k Methacrylate Polyfuse Icon Containment 1610 psi 11.10 MPa 98 psi 0.68 MPa Adhesive INTERMEDIATE ADHESION 2k Acrylic FA10-05 Blk C010817 AccraLock 724 psi 4.99 MPa 58 psi 0.40 MPa Cohesive 2k Acrylic FA10-05 Blk1 AccraLock 722 psi 4.98 MPa 44 psi 0.30 MPa Cohesive 2k Epoxy Loctite Epoxy Instant Mix Loctite 508 psi 3.50 MPa 81 psi 0.56 MPa Adhesive 2k Epoxy Gorilla Glue Epoxy Gorilla Glue 341 psi 2.35 MPa 198 psi 1.37 MPa Adhesive NOT RECOMMENDED  2k Epoxy Loctite Epoxy Marine Loctite 0 0 No bond ADHESIVE SELECTION Brands identified are owned by the manufacturers of the adhesive products. 1 surface sanded with 220 grit scuff prep 2 surface primed with 459T FASTENER TYPE BENEFITS CONSIDERATIONS Through-Bolting Best mechanical locking system Need back side access to panel Screw-In Anchor Highest pullout strength Requires pilot hole Cup Washer Spreads compressive load Requires relief hole; For substructure and hard point attachment Wide Grip (Bulb-Style) Rivet Ease of use—no installation torque limitations For lower load attachments Sheet Metal or Wood Screw Readily available, low cost Penetrate both skins for improved pullout Shoulder Washer Limits compressive load Requires relief hole; For substructure and hard point attachment For more information on installation, adhesives, and fasteners for specific applications, please contact Avient.

MFI (190 °C, 21.6 Kg) Tensile Strength, Mpa

KEY PROPERTIES AND PERFORMANCE FR GRADES H GRADES PEEK GRADES LCP GRADES FLEX GRADES PROPERTIES CONDITION ISO UNIT PPE400FR PPE700FR PPE950FR PPE1200FR H1500HF H2300HF PEEK700 PEEK900 PEEK1000 PEEK1200 LCP650 LCP800 LCP950 FLX400 FLX700 FLX1100 Dielectric Constant (Dk) 2.4 GHz 4.0 7.0 9.5 12.0 15.0 23.0 7.0 9.0 10.0 12.0 6.5 8.0 9.5 4.0 7.0 11.0 Loss Tangent (Df) 2.4 GHz 0.0030 0.0039 0.0042 0.0045 0.0010 0.0037 0.0024 0.0025 0.0024 0.0027 0.0043 0.0045 0.0047 0.0010 0.0009 0.0012 Density 1183 g/cm3 1.44 1.97 2.20 2.50 2.60 3.40 1.94 2.20 2.30 2.40 2.00 2.15 2.30 1.52 1.93 2.50 Melt Flow Index (MFI) 5 kg, 300 °C (unless noted) 1113 g/10 min 17 12 13 5 5 8 15 @ 380 °C 13 @ 380 °C 10 @ 380 °C 6 - - - 11 @ 230 °C 2 @ 230 °C 0.3 @ 230 °C Tensile Strength at Break 23 °C/73 °F 527 MPa 47 52 44 45 23 40 64 62 65 67 75 80 75 11 17 25 Flexural Modulus 23 °C/73 °F 178 MPa 3100 4500 - 9300 2100 5000 6200 7600 9200 11000 8000 8500 8500 1400 1600 2900 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB 42 20 9 17 10 28 25 18 15 31 20 12 NB NB NB -20 °C/-4 °F 180 kJ/m2 - - - - 17 10 - - - - - - - - - Notched Izod 23 °C/73 °F 180 kJ/m2 14 6 4 3 5 4 6 4 4 4 10 6 4 59 23 13 -20 °C/-4 °F 180 kJ/m2 - - - - 5 4 - - - - - - - - - - STANDARD GRADES RADOME GRADES PROPERTIES CONDITION ISO UNIT PPE260 PPE300 PPE320 PPE350 PPE400 PPE440 PPE500 PPE650 PPE800 PPE950 PPE1200 RS260 RB260 RS265FR Dielectric Constant (Dk) 2.4 GHz 2.6 3.0 3.2 3.5 4.0 4.4 5.0 6.5 8.0 9.5 12.0 2.6 2.6 2.7 Loss Tangent (Df) 2.4 GHz 0.0009 0.0009 0.0010 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0010 0.0009 0.0012 0.0032 Density 1183 g/cm3 1.07 1.18 1.21 1.27 1.43 1.50 1.62 1.86 2.10 2.20 2.40 1.06 1.08 1.09 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 15 15 16 14 14 14 15 11 10 4 2 21 16 25 Tensile Strength at Break 23 °C/73 °F 527 MPa 40 45 47 50 50 48 45 43 37 37 36 50 42 52 Flexural Modulus 23 °C/73 °F 178 MPa 2700 2400 2000 2600 2800 2700 2600 2600 2300 2600 2600 2200 2200 2600 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB NB NB NB NB NB NB NB 50 28 24 NB NB NB -20 °C/-4 °F 180 kJ/m2 NB NB NB NB NB NB NB 50 47 27 25 NB NB NB Notched Izod 23 °C/73 °F 180 kJ/m2 8 55 69 35 22 20 15 9 8 5 4 19 14 11 -20 °C/-4 °F 180 kJ/m2 8 15 20 14 12 10 9 8 8 5 4 10 12 10 PREPERM™ SERIES PROPERTIES CONDITION ISO UNIT 8027 8025 8037 8019 8028 8026 8044 8029 8041 8045 8048 8036 8056 8031 Dielectric Constant (Dk) 1 GHz, 23 °C 3.0 3.1 3.4 3.6 3.8 4.4 4.8 5.3 5.4 5.9 6.0 7.0 7.3 9.0 Loss Tangent (Df) 1 GHz, 23 °C 0.0012 0.0012 0.0008 0.0010 0.0010 0.0010 0.0004 0.0008 0.0006 0.0002 0.0006 0.0007 0.0002 0.0007 Density 1183 g/cm3 1.25 1.26 1.35 1.39 1.45 1.59 1.72 1.75 1.79 1.89 1.88 2.06 2.086 2.25 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 16 19 10 11 15 13 10 10 15 15 19 10 18 4.7 Tensile Strength at Break 23 °C/73 °F 527 MPa 59 54 54 62 59 54 52 58 52 45 49 45 37 38 Flexural Modulus 23 °C/73 °F 178 MPa 2780 2560 2850 3060 3350 3700 3157 4300 4320 3137 4150 3370 2560 4200 Notched Izod 23 °C/73 °F 180 kJ/m2 15.3 14 14.8 14 12.6 10.4 9.9 8.6 7.4 7.9 6.6 7.1 6.2 6.8 EDGETEK™ 7600 SERIES Copyright © 2021, Avient Corporation.

Product Name H15 H XF V2 70 MF5200-5004 NHFR V2 HS MF5200-5005 NHFR V2 RS H MF5200-5006 NHFR V2 RS HS H6 H XF V0 70 H20 H XF V0 T 70 H6 T/05 H XF V0 70 H6 T/10 H XF V0 70 H6 T/20 XF V0 T 70 H6 GF/10 XF V070 H8 GF/20 XF V0 70 H12 GF/25 H XF V0 70 H6 GF/30 XF V0 70 PE H XF V0 70 Polymer PP PE Flammability V2 V2 V2 V2 V0 V0 V0 V0 V0 V0 V0 V0 V0 V0 UL Listed No No No No No No No No No No No No No Yes Reinforcement Unfilled Unfilled Talc Talc Unfilled Unfilled Talc Talc Talc Glass Filled Glass Filled Glass Filled Glass Filled Unfilled Density (g/cm3) 1.03 0.9 0.98 1.05 1.07 1.06 1.08 1.15 1.16 1.11 1.25 1.32 1.35 1 MFI, 230°C/2.16 kg 13 20 23 20 5.5 20 6 6 6 6 7 12 5.5 E-Modulus (Tensile Modulus - Mpa) 1900 1500 2400 2600 2500 2500 2500 3000 3000 4300 6500 7500 8250 2000 Tensile Strength (Mpa) 25 30 32 30 26 20 26 25 23 55 70 75 78 20 Elongation (%) Product Name C10 XF V2 70 C10 H XF V0 70 C10 H XF V0 T C10 T/10 XF V0 70 C10 T/20 XF V0 70 C6 GF/30 H XF V0 70 C2 GF/20 XF V0 T 70 C6 GF30 H UV XF V0 70 GREY X2 70 GREY X3 70 Resin Chemistry COPO HOMO + COPO Polymer PP Flammability V2 V0 V0 V0 V0 V0 V0 V0 V0 V0 UL Listed No No No No No Yes No No No No Reinforcement Unfilled Unfilled Unfilled Talc Talc Glass Filled Glass Filled Glass Filled Glass Filled Glass Filled Density (g/cm3) 1.01 1.06 1.09 1.16 1.28 1.35 1.23 1.38 1.24 1.25 MFI, 230°C/2.16 kg 7 10 10 9 10 4.5 2.5 4.5 4 0 E-Modulus (Tensile Modulus - Mpa) 1800 1500 1300 1500 2400 8000 5000 8000 5250 6000 Tensile Strength (Mpa) 18 15 20 15 15 60 45 60 40 45 Tensile Strain at Break (ISO 527-2) (%) 63

POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min FinishedSlit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. TYPICAL PROPERTIES - MULTI-AXIAL LAMINATES 0° Testing Orientation 90° Testing Orientation Product Name Resin Fiber Content Laminate Layers & Orientation Areal Weight Nominal Thickness1 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0/90 0.20 29.49 1000 0.031 0.79 - - - - 2020 13.9 59.7 412 - - - - 2020 13.9 59.7 412 0/90/0 0.31 44.24 1500 0.045 1.14 2250 15.5 46.4 320 3070 21.2 79.4 547 186 1.3 9.7 67 1330 9.2 39.6 273 0/90/90/0 0.41 58.98 2000 0.057 1.45 2000 13.8 44.0 303 2400 16.5 60.6 418 496 3.4 20.7 143 2210 15.2 56.4 389 6531 65 0/90 0.10 14.80 502 0.014 0.36 - - - - 2240 15.4 60.9 420 - - - - 2240 15.4 60.9 420 0/90/0 0.15 22.20 753 0.020 0.50 2650 18.3 58.3 402 3100 21.4 82.8 571 280 1.9 NB2 NB2 1670 11.5 42.5 293 0/90/90/0 0.21 29.61 1004 0.027 0.68 2260 15.6 51.5 355 2470 17.0 62.2 429 580 4.0 30.4 210 2310 15.9 59.6 411 6536 0/90 0.14 20.71 702 0.021 0.53 - - - - 1980 13.7 60.5 417 - - - - 1980 13.7 60.5 417 0/90/0 0.22 31.06 1053 0.029 0.74 2309 15.9 48.3 333 2730 18.8 81.5 562 245 1.7 13.0 90 1490 10.3 44.3 305 0/90/90/0 0.29 41.41 1404 0.037 0.94 2164 14.9 47 324 2170 15.0 59.6 411 512 3.5 25.4 175 2340 16.1 71.2 491 6538 0/90 0.27 39.54 1341 0.034 0.86 - - - - 2220 15.3 60.0 414 - - - - 2220 15.3 60.0 414 0/90/0 0.41 59.53 2018 0.057 1.44 2825 19.5 40.9 282 2780 19.2 67.6 466 218 1.5 10.2 70 1410 9.7 40.0 276 0/90/90/0 0.55 79.37 2691 0.073 1.85 1880 13.0 32.4 223 2060 14.2 54.0 372 478 3.3 18.0 124 2360 16.3 61.0 421 7034B PP-Black 70 0/90 0.14 20.48 694 0.016 0.40 - - - - 2680 18.5 62.0 427 - - - - 2680 18.5 62.0 427 0/90/0 0.21 30.72 1041 0.028 0.71 1750 12.1 55.9 385 3710 25.6 75.1 518 160 1.1 11.3 78 1440 9.9 36.2 250 0/90/90/0 0.28 40.95 1388 0.036 0.90 1700 11.7 40.4 279 2800 19.3 55.7 384 432 3.0 25.4 175 2350 16.2 52.4 361 6020 PE 60 0/90 0.17 23.90 810 0.023 0.57 - - - - 1830 12.6 52.00 359 - - - - 1830 12.6 52.0 359 0/90/0 0.25 35.86 1216 0.033 0.84 2265 15.6 40.0 276 2740 18.9 68.2 470 181 1.2 10.0 69 1350 9.3 35.3 243 0/90/90/0 0.33 47.81 1621 0.044 1.12 1810 12.5 30.0 207 2000 13.8 48.0 331 502 3.5 22.0 152 1820 12.5 46.0 317 6621 66 0/90 0.19 27.94 947 0.025 0.65 - - - - 2280 15.7 60.0 414 - - - - 2280 15.7 60.0 414 0/90/0 0.29 41.90 1421 0.040 1.01 2490 17.2 37.0 255 2900 20.0 70.0 483 165 1.1 9.7 67 1440 9.9 38.0 262 0/90/90/0 0.39 55.87 1894 0.053 1.35 1810 12.5 29.0 200 2160 14.9 58.0 400 508 3.5 21.0 145 2170 15.0 53.0 365 5843 PETG 58 0/90 0.16 23.70 804 0.020 0.50 - - - - 2050 14.1 59.6 411 - - - - 2050 14.1 59.6 411 0/90/0 0.25 35.55 1205 0.030 0.76 2800 19.3 89.0 614 2900 20.0 78.0 538 397 2.7 NB2 NB2 1580 10.9 42.5 293 0/90/90/0 0.33 47.40 1607 0.039 0.99 2540 17.5 72.0 496 2300 15.9 57.7 398 780 5.4 35.0 241 2170 15.0 63.0 434 5840B aPET-Black 58 0/90 0.18 26.01 882 0.021 0.53 - - - - 2530 17.4 55.3 381 - - - - 2530 17.4 55.3 381 0/90/0 0.27 39.01 1323 0.032 0.82 2986 20.6 91.1 628 3160 21.8 68.7 474 252 1.7 20.0 138 1580 10.9 36.9 254 0/90/90/0 0.36 52.01 1763 0.042 1.07 3065 21.1 73.1 504 2570 17.7 54.2 374 813 5.6 37.0 255 2440 16.8 55.6 383 5860B PA6-Black 58 0/90 0.16 22.95 778 0.021 0.52 - - - - 2190 15.1 56.00 386 - - - - 2190 15.1 56.0 386 0/90/0 0.24 34.43 1167 0.034 0.86 2510 17.3 117.0 807 2760 19.0 63.7 439 657 4.5 22.2 153 1630 11.2 39.7 274 0/90/90/0 0.32 45.91 1556 0.046 1.18 2210 15.2 106.0 731 2090 14.4 45.6 314 1110 7.7 50.8 350 2150 14.8 57.4 396 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables.

Shots Composite Panel Nominal Thickness Nominal Weight Level 1 9mm full metal copper jacket with lead core 1175 ft/sec 358 m/sec 3 GlasArmor Level 1 0.256 in 6.5 mm 2.7 lb/ft2 13.2 kg/m2 Level 2 Level II-A .357 magnum jacketed lead soft point 1250 ft/sec 381 m/sec 3 GlasArmor Level 2 0.384 in 9.8 mm 4.0 lb/ft2 19.5 kg/m2 Level 3 Level III-A .44 magnum lead semi-wadcutter gas checked 1350 ft/sec 411 m/sec 3 GlasArmor Level 3 0.500 in 12.7 mm 5.1 lb/ft2 24.9 kg/m2 ThermoBallistic Level 3 0.440 in 11.2 mm 3.9 lb/ft2 19.0 kg/m2 Level 4 .30 cal. rifle lead core 2450 ft/sec 747 m/sec 1 Customized solutions are available. Property GlasArmor Panel ThermoBallistic Panel Test Method Glass Content 55 wt% 73 wt% Density 0.066 lb/in3 1.83 g/cm3 0.062 lb/in3 1.72 g/cm3 ASTM D-792 Flex Mod 2.1–2.7 msi 14.5 - 18.6 GPa 2.5 msi 17.2 GPa ASTM D-790 Flex Strength 65 ksi 448 MPa 14 ksi 96.5 MPa ASTM D-790 Barcol Hardness 50–60 n/a ASTM D-2583 Fire Rating 1 hour1 n/a ASTM E-119-09c Flame Spread Rating 452 n/a ASTM E-84-08a Smoke Developed Rating 1652 n/a ASTM E-84-08a MATERIAL DATA (TYPICAL VALUES) 1 UL Level 3 panel was fire tested as part of a wall system with steel studs and drywall face sheet 2 NFPA & IBC Class B rating achieved www.avient.com Copyright © 2023, Avient Corporation.

ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Defining Characteristic High temperature sealing performance Ambient temperature sealing performance High temperature sealing performance Ambient temperature sealing performance Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368).