Contact a Wilflex distributor at Avient to learn more.   Media Contact Nicole DeChant Avient Corporation nicole.dechant@avient.com Media Relations Contacts

TIER 2 SUPPLIER H V A C F L A P • Eliminate post treatment heating of parts to achieve required odor level (≤3.0 VDA 270) • Lowest VOC / FOG performance (VDA 278) at the same compression set as previous material • Reduced processing steps and lowered energy costs for the molder • Achieved targeted odor levels and met VOC / FOG performance and compression set standards OnFlex™ LO Thermoplastic Elastomer WHY AVIENT?

TEMPERATURE Material Rear °F (°C) Center °F (°C) Front °F (°C) Nozzle °F (°C) Melt °F (°C) Mold °F (°C) Nylon 6,6 14% NiCF 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) Nylon 6,6 30% SS 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) PBT 14% NiCF 510–410 (265–280) 490–540 (255–280) 480–530 (250–275) 480–530 (250–275) 480–530 (250–275) 150–250 (65–120) PC 14% NiCF 540–570 (280–300) 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 530–560 (275–290) 150–250 (65–120) ABS 14% NiCF 470–520 (240–270) 460–520 (240–270) 460–520 (240–270) 460–530 (240–275) 460–530 (240–275) 100–200 (40–90) PP 14% NiCF 440–480 (225–250) 440–480 (225–250) 430–470 (220–245) 420–460 (215–240) 420–460 (215–240) 125–175 (50–80) DRYING Material Temperature °F (°C) Time Minimum Moisture Maximum Moisture Nylon 6,6 14% NiCF 180 (80) 4–5 hours 0.05% 0.20% Nylon 6,6 30% SS 180 (80) 4–5 hours 0.05% 0.20% PBT 14% NiCF 250 (120) 6-8 hours 0.02% 0.03% PC 14% NiCF 250 (120) 3–4 hours 0.02% 0.02% ABS 14% NiCF 200 (90) 2–4 hours 0.05% 0.10% PP 14% NiCF 180 (80) 2–4 hours 0.20% 0.30% Equipment • Feed throats smaller than 2.5" may cause bridging due to pellet size - Larger feed throats will be more advantageous with long fiber EMI shielding resins • General purpose metering screw is recommended - Mixing/barrier screws are not recommended • L/D ratio - 18:1–20:1 (40% feed, 40% transition, 20% metering) • Low compression ratio - 2:1–3:1 • Deep flights recommended - Metering zone 3.5 mm - Feed zone 7.5 mm • Check ring - Three-piece, free-flowing check ring • General purpose nozzle (large nozzle tips are recommended) - Minimum orifice diameter of 7/32" - Tapered nozzles are not recommended for long fiber EMI shielding resins • Clamp tonnage: - 2.5–5 tons/in2 Gates • Large, free-flow gating recommended - 0.25" x 0.125" land length - 0.5" gate depth Runners • Full round gate design • No sharp corners • Minimum of 0.25" diameter • Hot runners can be used PROCESSING Screw Speed Slower screw speeds are recommended to protect fiber length Back Pressure Lower back pressure is recommended to protect fiber length Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) PROCESS CONSIDERATIONS Recommended – retain fiber length (maximize conductivity) • Low shear process • Low screw speed and screw RPM • Slow Injection speed • Fill to 99–100% on first stage of injection - Reduces potential nesting of fibers at gate location - Improves mechanical performance near gate location - Promotes ideal fiber orientation Resin Rich Surface • Achieved when using a hot mold temperature and longer cure times ≥ Max mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could reduce attenuation performance in an assembly Fiber Rich Surface • Achieved when using a cold mold temperature and shorter cure times ≤ Minimum mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could improve attenuation performance in an assembly www.avient.com Copyright © 2020, Avient Corporation.

Activity: Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Activity: Design and Manufacture of Custom PVC Plastisol and PVC Slush Mold Powder Facility: Avient Corporation - Malmö, Sweden Järnyxegatan 7 P.O.

Activity: Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Activity: Design and Manufacture of Custom PVC Plastisol and PVC Slush Mold Powder Facility: Avient Corporation - Malmö, Sweden Järnyxegatan 7 P.O.

Activity: Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Activity: Design and Manufacture of Custom PVC Plastisol and PVC Slush Mold Powder Facility: Avient Corporation - Malmö, Sweden Järnyxegatan 7 P.O.

Camino a Melipilla 15.170 , 9250000 Maipu, Chile Avient Corporation Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Järnyxegatan 7, SE-200 39 Malmö, Sweden Avient Corporation Design, Manufacture and Distribution of Thermoplastic Elastomer Resins & Pellets 831 Ridgeview Drive McHenry IL 60050 United States Avient Corporation Design, Manufacture and Distribution of Thermoplastic Elastomer Resins & Pellets 833 Ridgeview Drive McHenry IL 60050 United States Avient Corporation Design, Manufacture and Distribution of Thermoplastic Elastomer Resins & Pellets 921 Ridgeview Drive McHenry IL 60050 United States Avient Corporation Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Via Bergamo 51, 23807 Merate, Italy Avient Corporation Design and Manufacture of Custom PVC Plastisol and PVC Slush Mold Powder 733 E.

Light-weighting solutions that replace heavier traditional materials like metal, glass and wood, which can improve fuel efficiency in all modes of transportation Investor Relations Contact: Joe Di SalvoVice President, Treasurer and Investor Relations, Avient Corporation, +1 440-930-1921, giuseppe.disalvo@avient.com, Media Contact:Kyle G. Investor Contacts

Light-weighting solutions that replace heavier traditional materials like metal, glass and wood, which can improve fuel efficiency in all modes of transportation and reduce carbon footprint   Media Contact Nicole DeChant Avient Corporation nicole.dechant@avient.com Media Relations Contacts

Light-weighting solutions that replace heavier traditional materials like metal, glass and wood, which can improve fuel efficiency in all modes of transportation and reduce carbon footprint Media contact Michelle Maniscalco Senior Manager, Marketing Communications Avient Corporation michelle.maniscalco@avient.com Media Relations Contacts