Polypropylene (PP) carriers are recommended for the harder SEBS formulations PP carrier is not recommended for softer grades, as the compound hardness will be affected. FLOW MARKS Back fills Shadowing Folds Filling from thin to thick sections.

APPLICATION BULLETIN PRODUCT NAME SUITABLE FOR APPLICATION LDR Cesa™ Stat OCA0025695 PP Permanent reduction of dust attraction in interior From 5% Cesa™ Stat OCA0025609 PC/ABS, PA6, PC/ASA Permanent reduction of dust attraction in interior From 8% Cesa™ Stat OCA0025603 LDPE, TPE Permanent reduction of dust attraction in interior From 7% The graph shows the measurement of the charge decay time at 23°C/50% r.H. on 80x80x2mm IM plaques. Even after wash- ing the surface with detergent and water with 5 repetitions, the antistatic effect remains unchanged. 0 500 1,000 1,500 2,000 2,500 3,000 0 20 40 60 80 100 Vo lta ge (V ) Time (s) PP talc filled 5% Cesa Stat OCA0025695 5% Cesa Stat OCA0025695 wash end www.avient.com Copyright © 2023, Avient Corporation.

SUSTAINING A LEGACY Avient is proud to support the art and tradition of bow building by offering Gordon Glass™ laminates to independent bowyers of any size or location through our authorized distributors.

This helps TPE flow and fill thin walled sections commonly encountered in over molding. Table 2 summerizes the data of different polyamide systems; polyamide 6, polyamide 66, glass filled, fiber reinforced , impact modified and heat stabilized. No Nylon Type Nylon description TPE Hardness Aging condition Peel, N/mm / lb / in 1 Capron 8333GHI Glass and impact 60A(1) Aging A 3.7 / 21 2 Capron 8333GHI Glass and impact 60A(1) Aging B 3.2 / 20 3 Capron 8333GHI Glass and impact 60A(1) Aging C 3.3 / 19 4 Capron 8333GHIHS Glass, impact and heat stabilized 60A(1) Aging A 3.2 / 20 5 Capron 8333GHIHS Glass, impact and heat stabilized 75A Aging A 3.0 / 17 6 Ultramid B3ZG6 Glass and impact 60A(1) Aging A 3.2 / 18 7 Zytel 70G33L Glass 60A(1) Aging A 3.9 / 22 8 Zytel 408AHS Heat stabilized and flow aid 60A(1) Aging A 3.7 / 21 9 Zytel 409AHS Heat stabilized and flow aid 60A(1) Aging A 3.2 / 20 Aging A: nylon substrate conditioned at room temperature and humidity for 4 weeks before TPE overmolding.

Custom products can be formulated with recycled PP and PE. KEY CHARACTERISTICS • UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings • GWFI (IEC 60695-11-10) up to 960°C • Comparative Tracking Index (CTI) PLC 0, 600V ratings • Injection molding and extrusion grades • Non-halogen grades available • Low dielectric performance with selected formulations • Good recyclability • Colorable MARKETS & APPLICATIONS Applications that require flame retardant performance including: • Transportation: Interior components, seat components, door panels, aircraft interiors, railway interiors, boat interiors • Construction & Building Materials: Cable insulation, pipes and fittings, insulation materials • Consumer – Appliance casings, housings, covers, fume hoods, battery packages, furniture • Industrial Equipment: Machine housings • Energy, Electrical & Electronic, E-Mobility: Battery frames, electrical housings, connectors • Telecommunication: Cable management • Packaging: Transportation of sensitive goods • Healthcare: Medical device housings and components PRODUCT BULLETIN MAXXAM FR FLAME RETARDANT POLYOLEFIN FORMULATIONS Non-halogenated Halogenated PP Homopolymer Copolymer Homopolymer Copolymer Unit Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Characteristic Talcum Talcum Talcum Talcum Reinforcement Mass-% 0 5–30 5–30 0 20–30 5-20 0 5–30 5–20 0 5–30 5–20 Colorable – ++ ++ + ++ ++ + + + + + + + Density g/cm3 0,9–1,08 1,28–1,37 0,98–1,55 0,92–1,06 1,25–1,35 0,95–1,28 0,94–1,04 1,3–1,55 1,01–1,42 0,96–1,01 0,94–1,58 0,95–1,46 Tensile Strength MPa 25–30 30–70 25–35 16–22 40–65 15–25 25-–35 30–70 25–35 20–24 20–55 -25 E-Modulus (Tensile) MPa 1600–2500 2500–8200 2500–4000 800–1200 2000–8000 1600–3000 1300–2000 3000–8900 1900–3500 1000–1400 1200–7500 1500–3000 Izod Impact 23°C notched % 2,0–4,5 3,5–7,5 2,5–4,5 5–40 2,5–18 2,5–6 2,5–4,5 3,5–6,0 3,0–7,0 4,0–40 2,5–16 2,5–10 Max. GF: glass Fiber, GB: Glass Bead, T: Talcum Copyright © 2024, Avient Corporation.

The Edgetek™ ET8900 Series consists of glass-filled and high impact specialty engineered polyketone (PK) thermoplastics.

To satisfy required performance characteristics they can be filled and reinforced with glass fiber, minerals, impact modifiers, colorants and stabilizer systems. KEY CHARACTERISTICS Formulated with bio-based resin and/or 10–50% filler from renewable plant sources, Maxxam BIO formulations: • Reduce product carbon footprint • Achieve equivalent performance to standard polyolefin formulations • Provide good stiffness, durability, impact resistance and UV stability • Deliver good surface finish and are easy to color • Enable customized performance characteristics depending on application need • Offer food contact compliance MARKETS AND APPLICATIONS Maxxam BIO formulations are suitable for use across many industries and applications where traditional polyolefin materials are used, including: • Transportation Interior Applications - Decorative profiles, trunk side liners, pillars, T-cup • Industrial - Structural parts, furniture • Consumer - Household goods, personal care items, packaging, office supplies, food contact applications • Electrical and Electronic – Housings, buttons, junction boxes SUSTAINABILITY BENEFITS • Formulated with bio-based resin and/or 10–50% natural filler • Utilize natural filler from renewable plant sources including olive seed based powder and cellulose fiber • Offer a lower product carbon footprint compared to traditional petroleum-based feedstock • Can be recycled at end of life PRODUCT BULLETIN CHARACTERISTICS UNITS Maxxam BIO MX5200-5036 Natural FD Maxxam BIO MX5200-5030 Natural FD Maxxam BIO MX5200-5030 Natural FD X1 Maxxam BIO MX5200-5001 Maxxam BIO MX5200-5033 Maxxam BIO MX5200-5034 Maxxam BIO MX5200-5035 Filler/Reinforcement Unfilled Unfilled Unfilled 30% Glass Fiber 10% 20% 30% Density (ISO 1183) g/cm 0.90 0.90 0.90 1.12 0.96 1.03 1.12 Tensile Modulus (ISO 527-1) @ 23°C MPa 1500 1000 1000 6400 1350 1650 2100 Tensile Stress (ISO 527-2) @ 23°C MPa 27.0 20.0 20.0 75.0 13.0 14.0 15.0 Tensile Strain at Break % 5 50 50 3.0 50 37 18 Charpy Notched (ISO 179) kJ/m 5 20 25 10 12 10 10 CHARACTERISTICS UNITS Maxxam BIO MX5200-5023 RS HS HI Natural 70 Maxxam BIO MX5200-5025 RS HS Natural 70 Maxxam BIO MX5200-5004 RS HS Maxxam BIO MX5200-5003 RS Maxxam BIO MX5200-5009 RS HS Natural 70 Maxxam BIO MX5200-5024 RS HS Maxxam BIO MX5200-5022 RS HS Filler/Reinforcement 15% Olive Seed Based 25% Olive Seed Based 30% Olive Seed 10% 35% Olive Seed 5% 15% Olive Seed 17% Glass Fiber/ 20% Olive Seed 20% Glass/ 10% Olive Seed 20% Density (ISO 1183) g/ccm 1.00 1.15 1.10 1.07 1.09 1.25 1.10 Tensile Modulus (ISO 527-1) @ 23°C MPa 1750 2000 2700 2500 3800 3500 4100 Tensile Stress at Break MPa 21.0 20.0 30.0 20.0 40.0 35.0 42.0 Tensile Strain at Break % 24 5 3 5 3 4 2 Notched Izod (ISO 180) kJ/m 15 7 3 2 5 15 7 MAXXAM BIO POLYOLEFINS – BIO-BASED RESIN – TECHNICAL PERFORMANCE MAXXAM BIO POLYOLEFINS – OLIVE SEED BASED FILLER – TECHNICAL PERFORMANCE CHARACTERISTICS UNITS Maxxam BIO MX5200-5029 NF HI UV Black X1 Maxxam BIO MX5200-5032 NFS UV Natural Maxxam BIO  MX5200-5020 NF/NFS UV Natural X1​ Maxxam BIO MX5200-5016 NF Natural Filler/Reinforcement 10% Cellulose Fiber 20% Cellulose Fiber 30% Cellulose Fiber 40% Cellulose Fiber Density (ISO 1183) g/ccm 0.95 1.00 1.02 1.07 Tensile Modulus ISO 527-1) @ 23°C MPa 1550 1750 2640 3600 Tensile Stress at Break (ISO 527-2) @ 23°C MPa 33 30 48 55 Tensile Strain at Break (ISO 527-2) @ 23°C % 8 12 9 4 Charpy Notched Impact Strength (ISO 179/1eA) kJ/m2 5 6 5 5 Charpy Unnotched Impact Strength (ISO 179/1eU) kJ/m2 33 49 38 30 MAXXAM BIO POLYOLEFINS – CELLULOSE FIBER FILLER – TECHNICAL PERFORMANCE Copyright © 2023, Avient Corporation.

PIPE & FITTINGS MANUFACTURER W A T E R / F L U I D D I S T R I B U T I O N • Suitable for PP-R and PP-RCT • Specific color targets for external and inner layers • Improved resistance to chlorine for the inner layer • Food contact approval for the inner layer • Batch-to-batch consistency • Matched color references in concentrates suitable for PP-R and PP-RCT • Developed custom colorant/antioxidant combination masterbatch with high resistance to chlorine and food contact approval for the inner layer • Ensured batch-to-batch consistency for sustained performance Color concentrates and color/antioxidant combination masterbatch KEY REQUIREMENTS WHY AVIENT?

Avient Exhibits New Bio-Filled Polymers and Sustainable Solutions Portfolio at Fakuma 2021 Avient Launches New Bio-Filled Polymer Grades at Fakuma 2021 Caption: Toothbrush handles and combs made using reSound™ NF bio-filled polymers [To download a high-resolution image, please click here: FOR MEDIA

COLORANTS AND ADDITIVES FOR WIRE & CABLE PRODUCT SELECTION GUIDE ONCOLOR™ COLORANTS FOR WIRE & CABLE APPLICATION DESCRIPTION PVC General Purpose Cable • Optimal incorporation in PVC formulations • Non ortho-phthalate range available PVC Automotive Cable • Optimized colors for T2 and T3 automotive applications • Non ortho-phthalate range available Unfilled PE, XLPE, PP Cable • Specific color range for unfilled polyolefins • Compatibility with cross-linkable systems • Special range to minimize shrinkage or for thin skin applications Filled Polyolefins, Non-Halogenated Flame Retardant PE Cable • Full range of colors, halogen-free or low amounts of halogens • Designed for incorporation into various non-halogenated flame retardant formulations PE Visico/Ambicat™ Crosslinked Polyethylene1 • Full range of colors for PE Visico/Ambicat™ cross-linked polyethylene • Specifically designed and tested to ensure compatibility with this cross-linking method Thermoset Rubber Cable • Colors designed for use with thermoset rubber • Fully compatible with vulcanization process Unfilled TPU Cable • Color range for unfilled polyester or polyether TPU • Provides good opacity at low addition levels Flame Retardant TPU Cable • Color range for filled/non-halogenated flame retardant TPU • Provides good color strength TPE Cable • Color range designed to enhance performance of various TPE brands • High temperature range available PA Cable • Different color ranges available depending on the polyamide type and the application PBT Cable • PBT color range mostly used in optical fiber, loose tube or tight buffered cables • Selection of pigments to prevent migration of color in gel-filled materials 1 Visico/Ambicat™ Crosslinked Polyethylene is a trademark of Borealis OnColor™ Colorants for wire & cable offer a comprehensive range of color series, covering the diverse specifications demanded by the cable industry.