https://www.avient.com/knowledge-base/case-study/schneider-electric-differentiates-eco-conscious-junction-boxes
Anything they developed would have to meet the international electrical standard IEC 60670-1, which says the materials used in the wall boxes have to pass a Glow Wire Flammability Index (GWFI) 850°C testing (IEC 60695-2-12) at the application thickness, and 960°C at 2mm.
All grades pass IEC 60695-2-12 Glow Wire Flammability Index (GWFI) at 960°
https://www.avient.com/sites/default/files/resources/Terms_and_Conditions_of_Sale_for_Finland_%2528English_Language_Version%2529.pdf
The issuance of orders by Buyer implies full
acceptance of these Terms and Conditions which shall prevail over Buyer's
terms and conditions in the event they contradict or deviate from these Terms
and Conditions.
2.
Except to the extent
attributable to the Product sold hereunder failing to meet the express warranties
set forth in paragraph 2, Buyer will indemnify, defend and hold Seller harmless
from all costs, expenses, damages, judgments or other loss, including costs of
investigation, litigation and reasonable attorney's fees, arising out of Buyer's
selection, use, sale and further processing of the Product sold hereunder.
Seller may deliver to Buyer a quantity of Products with a
quantity tolerance which may vary, depending upon the quantities ordered by
Buyer, as follows: (1) from 50 to 99 kgs, +/- 25%; (2) from 100 to 249 kgs, +/-
15%; (3) from 250 to 499 kgs, +/- 10%; (4) more than 500 kgs, +/- 5%.
https://www.avient.com/sites/default/files/2020-07/avient-abac-turkey-200721.pdf
2
Devlet Görevlilerine Rüşvet 2
Ticari Rüşvet 2
Kolaylaştırma Ödemeleri ve Komisyonlar 3
Temsilciler, Distribütörler ve Diğer Üçüncü Taraflarla Çalışmak 3
Durum Tespiti ve Onay Süreci 3
Uyarı İşaretleri 3
Muhasebe ve Kayıt Tutma Zorunlulukları 4
Olası İhlallerin Bildirilmesi 4
Avient Etik Yardım Hattı 4
Misillemeye Karşı Koruma 4
Hızlı Referans: ABAC YAPILACAKLAR VE YAPILMAYACAKLAR 5
1
Küresel Rüşvet ve Yolsuzluk Karşıtı
Politika
Avient dünyanın her yerinde tüm ticari faaliyetlerinde,
sahtecilik, rüşvet ve diğer yolsuzluk uygulamalarını
yasaklamıştır.
Bizim Sorumluluğumuz
Avient adına hareket eden tüm Avient yetkilileri,
çalışanları ve üçüncü taraflar bu Politikayı anlamaktan
ve bunlara uymaktan sorumludur ve her biri şu
yükümlülüklere sahiptir:
• Politikanın yürürlükte olan yönlerini bilmek ve bunları
astlarına aktarmak
• Belirli bir durumda Politikanın uygulanıp
uygulanmayacağı ya da herhangi bir eylemde
bulunup bulunulmayacağının açık olmaması
durumunda soru sormak
• Üçüncü taraflar aracılığıyla yürütülen ticari faaliyetleri
düzgün şekilde yönetmek ve izlemek
• Olası görevi kötüye kullanma belirtileri ya da
kanıtlarına karşı uyanık olmak
• Uygun olan kanallar aracılığıyla, ihlal ve şüphelenilen
ihlalleri derhal bildirmek
ABAC Yasaları, herhangi bir şirket veya kişinin, işi
sürdürmek veya garantiye almak veya başka bir uygunsuz
iş avantajı elde etmek için herhangi bir kişiye 2 değerli
bir şey teklif etmesini, vaat etmesini, ödemesini veya
ödemeye yetki vermesini yasa dışı hale getirir.
ABAC Yasalarına uymak için, Avient adına hareket eden
hiçbir çalışan veya üçüncü taraf, bu rüşvetin aşağıdaki
anlamlara geleceği herhangi bir biçimdeki hediye,
ağırlama veya değerli herhangi bir şeyi, doğrudan veya
dolaylı olarak, kimseye teklif etmemeli veya kimseden
almamalıdır:
• İş almak ya da mevcut işi elde tutmak
• İş kararlarını etki altına almak
• Adil olmayan bir avantaj sağlamak
2 Buna herhangi bir devlet memuru ve/veya özel sektör çalışanı dahildir
2
ABAC Yasaları geniş kapsamlıdır ve çok geniş bir şekilde
yorumlanabilir.
https://www.avient.com/sites/default/files/resources/AquaMix-_Fact_Sheet__72831-B_%25281%2529.pdf
Accelerator Dispersions
DPG Aquamix 165 50 1, 3 Diphenylguanidine
DPTT (DPTH) Aquamix 122 50 Dipentamethylenethiuram Hexasulfide
MBT Aquamix 305 50 2-mercaptobenzothiazole
MBTS Aquamix 111 50 Benzothiazyldisulfide
TETD Aquamix 181 50 Tetraethylthiuram Disulfide
TMTD Aquamix 121 55 Tetramethylthiuram Disulfide
TMTM Aquamix 179 50 Tetramethylthiuram Monosulfide
ZBEC Aquamix 167 40 Zinc Dibenzyldithiocarbamate
ZDBC Aquamix 129 50 Zinc Dibutyldithiocarbamate
ZDEC Aquamix 130 50 Zinc Diethyldithiocarbamate
ZDMC Aquamix 131 50 Zinc Dimethyldithiocarbamate
ZMBT Aquamix 128 50 Zinc 2-mercaptobenzothiazole
Aq
uam
ix ™
D
ispersio
ns
&
Em
ulsio
ns
AMERICAS
PolyOne Corporation
Polymer Coating Systems
1675 Navarre Rd.
Massillon, OH 44646
Phone: 1.330.834.3820
Fax: 1.330.837.8467
EUROPE
PolyOne Belgium SA
Rue Melville Wilson 2
5330 Assesse
Belgium
Phone: +32 (0) 83 660 271
E-mail: info.color@polyone.com
ASIA
PolyOne Shanghai China
No. 88, GuoShouJing Road
Z.J.
Massillon, OH 44646
Phone: 1.330.834.3820
Fax: 1.330.837.8467
EUROPE
PolyOne Belgium SA
Rue Melville Wilson 2
5330 Assesse
Belgium
Phone: +32 (0) 83 660 271
E-mail: info.color@polyone.com
ASIA
PolyOne Shanghai China
No. 88, GuoShouJing Road
Z.J.
https://www.avient.com/sites/default/files/2022-05/Avient_ALL_Policies_2022_0.pdf
Bob Patterson
Chairman, President, and CEO
February 2, 2022
SAFETY & HEALTH POLICY
Avient Corporation believes that safety and health are the highest corporate priority.
Bob Patterson
Chairman, President, and CEO
February 2, 2022
SECURITY POLICY
Avient Corporation places a high priority on protecting the security of our
people, our buildings and equipment, and our proprietary information,
technology and systems.
https://www.avient.com/sites/default/files/2021-06/chemical-resistance-technical-bulletin.pdf
TEST METHOD
Fifteen bars of each material were placed into jigs at 1% and 2%
strain.
This procedure was completed by placing one 1/2 inch section
of rayon gauze at the apex of each bar, and soaking the gauze with the
disinfectant to saturate the material.
https://www.avient.com/sites/default/files/2023-01/Disinfectant Resistant Trilliant and Versaflex HC Materials Program Bulletin_0.pdf
Trilliant™ HC high performance formulations were
developed for specific healthcare enclosure needs,
including:
• Chemical resistance to common disinfectants
• UL 94 ratings of 5VA at 3.0, V-0 at 1.5 mm &
V-1 at 0.75 mm
• Retained color aesthetics after chemical
exposure
• Ability to utilize existing PC/PET & COPE tooling
Tested using an adaptation from ASTM D543 for
environmental stress cracking resistance (ESCR),
15 bars of each material were placed into jigs at
1% and 2% strain.
This procedure was completed by placing one
1/2 inch section of rayon gauze at the apex of each
bar, and soaking the gauze with the disinfectant
to saturate the material.
https://www.avient.com/sites/default/files/2021-01/avient-colorants-switzerland-register-excerpt.pdf
LANDSCHAFT I
cHE480.567.505 Avient Colorants Switzerland AG Muttenz 2
Alle Eintragungen
Ei Ae Lö Personalangaben Funktion Zeichnungsart
4
b
7m
4m
7m
6m
horigef,
in+irstetden
Mer*leihNsrberfdeutseherStaatsangehöriger, in Kronberg (DE)
rStaatsangehd'riger-in
Cuxen@+U)
James, Robert Kenneth, amerikanischer Staatsangehöriger, in
Ohio (US)
Garratt, Michael Alexander, amerikanischer Staatsangehöriger, in
Luxemburg (LU)
Tamura, Mauricio Massanobu, portugiesischer Staatsangehöriger,
in Birsfelden
Merklein, Norbert, deutscher Staatsangehöriger, in Rheinfelden
l:M.des
Venffattungsrates
lAltgtietres
Veftvattungsrates
l+tgl+e#es
Venffattungsrates
Präsident des
@
Kollektivunterschrift zu zweien
Ehz ehrntersehrift
Arlesheim, 02.12.2020 11:46 BM Dieser Auszug aus dem kantonalen Handelsregister hat ohne die
nebenstehende Originalbeglaubigung keine Gültigkeit.
Bezüglich der letzten, noch nicht publizierten
Eintragung liegt die Ermächtigung des Eidgenössischen Amtes für
das Handelsregister im Sinne von Art. 11 Abs. 2 HRegV vor.
https://www.avient.com/sites/default/files/2024-12/Complet PKE Product Bulletin.pdf
TECHNICAL
PROPERTIES(1)
TEST
METHOD
Complēt
LGF30-PKE NAT
LGF40-PKE NAT
LGF50-PKE NAT
Physical
Density/Specific Gravity ASTM D792 1.47 1.54 1.66
Mechanical
Tensile Strength (Yield) ASTM D638 21,100 psi 24,700 psi 26,400 psi
Tensile Modulus(2) ASTM D638 1,150,000 psi 1,570,000 psi 2,150,000 psi
Flexural Modulus(3) ASTM D790 1,120,000 psi 1,480,000 psi 2,030,000 psi
Flammability (non-PFAS options available)
Flame Rating @ 1.5 mm UL 94 V-0 V-0 —
COLD IMPACT PERFORMANCE
Ft
-lb
/in
Data based on single lot of lab-generated samples.
Values are not to be construed as specifications.
(2) 0.20 in/min
(3) 0.05 in/min
https://www.avient.com/sites/default/files/resources/POL%2520Credit%2520Suisse%2520IR%2520Presentation%2520w%2520non-GAAP%25209%252017%25202013.pdf
Forward – Looking Statements
Page 2
• This presentation includes the use of both GAAP (generally accepted accounting
principles) and non-GAAP financial measures.
EPS: $2.50
Assumptions
• Operating margins in mid-range
of 2015 targets
• No global recession
• No investment in incremental
PP&S capacity
• Completion of 2-3 midsize
accretive acquisitions
• Housing starts at 85% of 50 year
norm by 2015
• Mid single digit revenue CAGR
• Remain comfortably below 3X Net
Debt / EBITDA
Page 11
2012
Rev: $2.9B
Adj.
Platform operating income mix percentage 2005Y* 2008Y* 2010Y* 2012Y* 2012PF** H1 2013***
Global Specialty Engineered Materials $ 0.4 $ 17.6 $ 49.7 $ 47.0 $ 47.7 $ 32.5
Global Color, Additives and Inks 4.3 28.1 37.7 66.8 81.6 54.7
Designed Structures & Solutions - - - - 20.9 10.5
Specialty Platform $ 4.7 $ 45.7 $ 87.4 $ 113.8 $ 150.2 $ 97.7
Performance Products and Solutions 75.7 31.3 54.0 74.9 37.4 27.5
Distribution 19.5 28.1 42.0 66.0 66.0 33.1
SunBelt Joint Venture 91.9 28.6 18.9 - - -
Corporate (51.5) (425.1) (27.7) (87.6) (87.9) (37.1)
Operating income (loss) GAAP $ 140.3 $ (291.4) $ 174.6 $ 167.1 $ 165.7 $ 121.2
Less: Corporate operating expense (income) 51.5 425.1 27.7 87.6 87.9 37.1
Operating income excluding Corporate $ 191.8 $ 133.7 $ 202.3 $ 254.7 $ 253.6 $ 158.3
Specialty platform operating mix percentage 2% 34% 43% 45% 60% 62%
* Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment.
** Pro Forma results include Spartech and Glasforms acquisitions, Specialty Coatings reclass and exclude the Resin business assets.
*** Restated results to exclude the Resin business and to remove Specialty Coatings from the Performance Products and Solutions segment into
Global Color, Additives and Inks segment.