also intends to grant the underwriters an option, exercisable for 30 days after the date of the final prospectus supplement, to purchase up to an additional

Geon(TM) V4790-30 Saturn Yellow HDP

The typical densities of these specialty plastics vary from 1.65 to 1.75 g/cm3, which is 30 to 40 percent less than aluminum, bringing a high-performance alternative to the table at a fraction of the weight.

APPLICATIONS • Automotive, consumer products, E&E products • PP, ABS, PC co-polyester, PA6, PA 66, PA12, and others on request KEY BENEFITS • Up to 10 hours glow depending on resin, activation energy, and pigment loading • Unlimited repetition of energy accumulation and emission process • Excellent temperature and chemical stability • Excellent weathering fastness and lightfastness • Limited influence on mechanical properties • Formulated with low-concern substances Copyright © 2023, Avient Corporation.

DESCRIPTION CHARACTERISTICS PROCESSES CC10120195WE Multi-purpose purge concentrate that is miscible with all resin systems Performance up to 280°C Extrusion, molding, injection and film processes 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

APPLICATIONS • Construction: roofing underlay, cable wrapping, geotextiles • Medical: surgical gowns, surgical drapes, sterile tray wraps, hospital bed sheets, and curtains • Filtration: various filters that require water repellency BENEFITS • Fast and long-lasting water repellency • IPA repellency grade 6 • No visible influence on the final color of the nonwoven fabric • Can be combined with color into a single product for convenience • Regulatory compliance to key standards and support for specific standards PRODUCT BULLETIN Copyright © 2023, Avient Corporation.

On May 30, 2013, the Company divested these two facilities, and the business they support to Mexichem. On February 28, 2013, we issued $600.0 million aggregate principal amount of senior notes, which mature on March 15, 2023. On February 28, 2013, PolyOne issued $600.0 million aggregate principal amount of senior notes, which mature on March 15, 2023.

Lower Total System and Lifecycle Cost GridCore Composite Poles have an expected service life of up to 80 years, compared to 30-40 years for wood poles. KEY PERFORMANCE ADVANTAGES Southern Yellow Pine1 Equivalent Wood Pole GridCore FRP Pole2 14 in x .750 in Length (ft) Load Class3 Allowable Class Load4 (kip) Weight (lb) Deflection5 (in) Weight (lb) Deflection5 (in) 40 3 1.95 1360 35 1040 12 2 2.41 1580 32 14 1 2.93 1810 30 18 H1 3.51 2050 28 21 H2 4.16 2310 26 25 45 3 1.95 1630 45 1170 17 2 2.41 1880 41 21 1 2.93 2160 38 26 H1 3.51 2450 36 31 H2 4.16 2760 33 37 50 3 1.95 1910 56 1300 24 2 2.41 2210 52 30 1 2.93 2530 48 36 H1 3.51 2880 45 44 H2 4.16 3240 42 52 55 3 1.95 2210 68 1430 33 2 2.41 2550 63 40 1 2.93 2930 58 49 H1 3.51 3320 54 59 H2 4.16 3740 51 70 60 3 1.95 2520 82 1560 43 2 2.41 2910 76 53 1 2.93 3340 70 65 H1 3.51 3790 65 78 H2 4.16 4270 61 92 65 3 1.95 2840 97 1690 56 2 2.41 3290 90 69 1 2.93 3770 83 84 H1 3.51 4280 77 100 H2 4.16 4820 72 119 70 3 1.95 3180 114 1820 71 2 2.41 3690 105 87 1 2.93 4220 97 106 H1 3.51 4790 90 127 H2 4.16 5390 85 150 POLE SELECTION GUIDE 1 Wood properties data are per ANSI O5.1-2022 Table 1.

TEMPERATURE Material Rear Center Front Nozzle Melt Mold Nylon 6,6 540–570 530–560 530–560 540–570 540–570 200–300 (90–150) Nylon 6,6 30% SS 540–570 530–560 530–560 540–570 540–570 200–300 (90–150) PBT 510–410 (265–280) 490–540 (255–280) 480–530 480–530 480–530 150–250 (65–120) PC 14% NiCF 540–570 540–570 530–560 530–560 530–560 150–250 (65–120) ABS 470–520 460–520 460–520 460–530 (240–275) 460–530 (240–275) 100–200 (40–90) PP 440–480 (225–250) 440–480 (225–250) 430–470 (220–245) 420–460 (215–240) 420–460 (215–240) 125–175 (50–80) DRYING Material Temperature °F (°C) Time Minimum Moisture Maximum Moisture Nylon 6,6 14% NiCF 180 (80) 4–5 hours 0.05% 0.20% Nylon 6,6 30% SS 180 (80) 4–5 hours 0.05% 0.20% PBT 14% NiCF 250 (120) 6-8 hours 0.02% 0.03% PC 14% NiCF 250 (120) 3–4 hours 0.02% 0.02% ABS 14% NiCF 200 (90) 2–4 hours 0.05% 0.10% PP 14% NiCF 180 (80) 2–4 hours 0.20% 0.30% Equipment • Feed throats smaller than 2.5" may cause bridging due to pellet size - Larger feed throats will be more advantageous with long fiber EMI shielding resins • General purpose metering screw is recommended - Mixing/barrier screws are not recommended • L/D ratio - 18:1–20:1 (40% feed, 40% transition, 20% metering) • Low compression ratio - 2:1–3:1 • Deep flights recommended - Metering zone 3.5 mm - Feed zone 7.5 mm • Check ring - Three-piece, free-flowing check ring • General purpose nozzle (large nozzle tips are recommended) - Minimum orifice diameter of 7/32" - Tapered nozzles are not recommended for long fiber EMI shielding resins • Clamp tonnage: - 2.5–5 tons/in2 Gates • Large, free-flow gating recommended - 0.25" x 0.125" land length - 0.5" gate depth Runners • Full round gate design • No sharp corners • Minimum of 0.25" diameter • Hot runners can be used PROCESSING Screw Speed Slower screw speeds are recommended to protect fiber length Back Pressure Lower back pressure is recommended to protect fiber length Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) PROCESS CONSIDERATIONS Recommended – retain fiber length (maximize conductivity) • Low shear process • Low screw speed and screw RPM • Slow Injection speed • Fill to 99–100% on first stage of injection - Reduces potential nesting of fibers at gate location - Improves mechanical performance near gate location - Promotes ideal fiber orientation Resin Rich Surface • Achieved when using a hot mold temperature and longer cure times ≥ Max mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could reduce attenuation performance in an assembly Fiber Rich Surface • Achieved when using a cold mold temperature and shorter cure times ≤ Minimum mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could improve attenuation performance in an assembly www.avient.com Copyright © 2020, Avient Corporation.

sportswear • Can be customized to achieve the desired intensity PRODUCT BULLETIN Copyright © 2023, Avient Corporation.