Buyer shall not place material obtained from a manufacturer other than PolyOne into containers labeled for PolyOne-sourced Product, nor shall Buyer sell or represent as Product any materials made by a manufacturer other than PolyOne. 8.

KEY CHARACTERISTICS • Fabric FX can be formulated to include properties such as UV color protection and anti-scratch performance • Fabric FX can be processed on standard molding machinery • Different matrix materials can be enhanced with Fabric FX, including ABS, PC/ABS, PB, and unfilled or talc-filled PP • There is no limitation on the graining that can be used; the fabric effect will differ depending on the grain effect engraved in the tool • If parts are extruded or a mold is not engraved, final parts will have an attractive speckled appearance, but will not be textured TYPICAL USES Fabric FX concentrates are suitable for any application that could benefit from an enhanced textile-like appearance. Processing conditions can cause material properties to shift from the values stated in the information.

Because the trays were regularly handled by consumers and filled with food, it was very important that any changes made to the material would not jeopardize the packaging’s FDA compliance. The sheet producer began experimenting with material changes in-house, but struggled to achieve consistency of release.

Our material and process experts provide guidance and technical support to transition from paint to MIC and to fulfill both the targeted aesthetics and application requirements. Processing conditions can cause material properties to shift from the values stated in the information.

Processing conditions can cause material properties to shift from the values stated in the information. POLYMER FAMILY MATERIAL PRODUCT NAME PRODUCT TYPE DOSAGE Polyolefin PEAN698413 CESA Antimicro SE 99-58 Silver 2–7.5% Polyolefin PEAN698432 CESA Antimicro J8146 Zinc 1–4% Polypropylene PPA0698636 CESA Antimicro J8259 Zinc 1–4% Nylon ABA0820032 CESA Antimicro ABA0820032 Silver 2–7.5% Polyester NBAN698441 CESA Antimicro S58441 Silver 2–7.5% Polycarbonate NCAN820009 CESA Antimicro NCAN820009 Silver 2–7.5% TPU RUA0698433 CESA Antimicro J8843 Zinc 1–4% Styrenic SLA0820011 CESA Antimicro SLA0820011 Zinc 1–4%

NEUSoft™ UR842A NEUSoft™ UR852A NEUSoft™ UR862A NEUSoft™ UR873A Hardness 42 52 62 73 Specific Gravity 0.96 0.98 1.01 1.04 Compression Set 17 16 16 23 Tensile Strength @ 50% (psi) 130 185 265 455 Tensile Strength @ 100% (psi) 185 257 364 594 Tensile Strength @ 200% (psi) 305 392 532 830 Tensile Strength @ Break 990 1367 1849 2509 Elongation 501 575 626 542 Tear Resistance 120 164 234 319 Melt Index 190C/8.7kg 2 4 9 13 SELECTION GUIDE NEUSoft™ Thermoplastic Polyurethanes With continued advancement in healthcare technology, the importance of quick prototyping and material sampling has never been greater. Processing conditions can cause material properties to shift from the values stated in the information.

Discover our range of lightweight, durable, and innovative material solutions for your next-gen products that deliver peak performance, mile after frozen mile. For more on material solutions for snowmobiles, visit avient.com © 2025, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 EXTENDED PERFORMANCE Minimize Moisture Uptake from Melted Snow SOLUTION: Moisture-Resistant Long Fiber Reinforced Composites, Corrosion-Resistant Additives TACTILE EXPERIENCE Soft Touch Feel, Durable Performance, Lower Thermal Conductivity than Metals SOLUTION: Thermoplastic Elastomers (TPEs), Long Fiber Reinforced Composites THERMAL MANAGEMENT & SAFETY Heat Dissipation, Design Flexibility, Flame Retardancy SOLUTION: Thermally Conductive Formulations, Flame Retardant Additives HIGH IMPACT DURABILITY High Strength-To-Weight Ratio, Elevated and Low Temperature Performance SOLUTION: Long Carbon Fiber Reinforced Composites, Continuous Fiber Reinforced Thermoplastic Tape & Laminates COLD TEMPERATURE PERFORMANCE Cold Temperature Flexibility and Toughness SOLUTION: Thermoplastic Elastomers (TPEs), Long Fiber Reinforced Composites, Impact Modifiers WEIGHT REDUCTION 40–50% Lightweighting Compared to Metal, Exceptional Structural Properties, Extremely High Stiffness and Strength from -40° to 160°F SOLUTION: Long Carbon Fiber Reinforced Composites, Chemical Foaming Agents AESTHETIC APPEAL Custom Color and Special Effects, Paint Replacement, Color Fade Protection SOLUTION: Custom Polymer Colorants, UV Blocking Additives, Antioxidant Additives, Molded-In-Color Metallics, Scratch and Mar Performance, Laser Marking, Pre-Colored High-Gloss Thermoplastics https://www.avient.com/industries/consumer/consumer-discretionary/outdoor-recreation/powersports https://www.avient.com/products/long-fiber-technology/complet-moisture-resistant-nylons https://www.avient.com/products/polymer-additives/corrosion-resistant-additives/cesa-cor-additives https://www.avient.com/products/thermoplastic-elastomers/versaflex-thermoplastic-elastomers https://www.avient.com/products/long-fiber-technology https://www.avient.com/products/engineered-polymer-formulations/conductive-signal-radiation-shielding-formulations/therma-tech-thermally-conductive-formulations https://www.avient.com/products/polymer-additives/colorants-and-additives-wire-cable/cesa-flame-retardant-additives https://www.avient.com/products/long-fiber-technology/complet-long-carbon-fiber https://www.avient.com/products/advanced-composites/continuous-fiber-composite-tape-laminates-and-barstock/polystrand-continuous-fiber-tapes-laminates https://www.avient.com/products/thermoplastic-elastomers/onflex-thermoplastic-elastomers https://www.avient.com/products/long-fiber-technology https://www.avient.com/products/polymer-colorants/color-additive-combination-masterbatches/smartbatch-combination-colorants-additives https://www.avient.com/products/long-fiber-technology/complet-long-carbon-fiber https://www.avient.com/products/polymer-additives/foaming-agents https://www.avient.com/products/polymer-colorants/solid-color-masterbatches/oncolor-fx-special-effect-colorants https://www.avient.com/products/polymer-additives/uv-and-light-blocking-additives/cesa-light-additives https://www.avient.com/products/polymer-additives/antioxidant-additives https://www.avient.com/products/polymer-colorants/color-additive-combination-masterbatches/smartbatch-fx-paint-replacement-0 https://www.avient.com/products/polymer-additives/visual-enhancement-effects/cesa-scratch-mar-resistance-additives https://www.avient.com/products/polymer-additives/colorants-and-additives-wire-cable/cesa-laser-additives https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/artisan-pre-colored-thermoplastics-premium-finishes

The PET packaging market is experiencing significant growth, driven by increasing sustainability demands, higher recycling targets, and the shift away from alternative materials such as polystyrene (PS) or polypropylene (PP). Processing conditions can cause material properties to shift from the values stated in the information.

CESA Nox is particularly suited to prevent further degradation of post-industrial and post-consumer recycled materials, allowing for more stable material and easier processing. 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation. Processing conditions can cause material properties to shift from the values stated in the information. POLYMER FAMILY MATERIAL PRODUCT NAME DOSAGE Polyolefin PEA0820031 CESA Nox PEA0820031 0.5–1% Polypropylene PPA0820055 CESA Nox PPA0820055 0.5–1% Polyamide ABA0820029 CESA Nox ABA0820029 0.5–1% Polyester NBA0820022 CESA Nox NBA0820022 0.5–1% Polycarbonate NCA0820015 CESA Nox NCA0820015 0.5–2.5% Styrenic SLA0820009 CESA Nox SLA0820009 0.5–2.5% TPU RUA0820029 CESA Nox RUA0820029 0.3–1.5%

The sale of Products or the providing of samples or developmental material shall not, by implication or otherwise, convey any license under any intellectual property right relating to the compositions and/or applications of the Products, sample, or developmental material, as applicable. Seller has no liability for the failure of discharge or unload- ing equipment or materials used by Buyer, whether or not sup- plied by Seller. 12. Buyer shall not use Seller’s name or trademarks in any advertisements, product descriptions, packaging materi- als, websites, or any other promotional materials, except with the prior written consent of Seller. 18.