There is no known data indicating that ATO can readily leach out of the products where it is used in a manner that represents significant risk for consumers.

Matrix Resin Fiber Reinforcement Fiber Content, by Weight (%) Epoxy E-CR or E-Glass >70% MATERIAL TECHNICAL DATA Property Test Procedure Rod Diameter 1.25 in (31.75 mm) 1.50 in (38.10 mm) Glass Transition Temp (Tg) ASTM 1356 100°C Minimum 100°C Minimum Water Absorption 24 hours at 50°C (122°F) ASTM D570 0.03% 0.03% Short Beam Strength (ILSS) ASTM 2344 8,400 psi (58 MPa) 9,200 psi (64 MPa) Transverse Shear Strength ASTM 7617 23,400 psi (160 MPa) 24,640 psi (170 MPa) Traceability Lot number shall be clearly marked on each package/shipment.

A sampling of standard laminate and barstock materials are listed in the table below, and customized versions are also available. 

Custom PP formulations available in opaque or transparent form

Discover the comprehensive technical services available through Specialty Engineered Materials at Avient to assist customers

Bergamid™ FR Non-Halogen Flame Retardant Formulations: specially formulated for high-voltage connectors in a safety orange color, these materials combine the application flexibility of high-flow nylons for thin-wall designs with the performance of a non-halogenated fire retardant system, available in unfilled or reinforced PA6, PA66 and PA 6/66 grades with UL 94 V0 and CTI 800+ ratings  

Available in pre-colored formulations, they offer a sustainable drop-in replacement for fossil-based grades and can be processed and recycled in the same channels.

Are UV protection and/or flame retardant packages available?

As a result of these plastisol aging characteristics and the potential differences in testing methodology, it is strongly recommended that incoming quality control (QC) specifications not be established based on plastisol Technical Data Sheets (TDS), or Certificates of Analysis (COA).

Gel migration is measured using a quantitative internal method * 6151 can be supplied with UV protection * Values concluded from the simulation of materials rheological data and modelling standard extrusion tooling Pressure: can affect extruder performance, higher pressure gives a lower output at the same rpm Shear rate: has a relation with self-cleaning of the walls and mixing conditions Stress: can affect the surface of the product, less stress gives a better surface aspect MIGRATION OF GEL COMPOUND Gel Compound ECCOH™ 6151* ECCOH™ 6153 UV ECCOH™ 6154 UV Unigel Average Good Excellent Teroson Average Excellent Good Itcogel Average Good Excellent ECCOH™ 6151 ECCOH™ 6153 UV ECCOH™ 6154 UV ∆P (bars) 101 63 60 Shear Rate (1/s) 9 9 9 Stress (kPa) 127 79 75 Application example: Gel-filled stranded loose tube optical fiber cable www.avient.com Copyright © 2020, Avient Corporation.