https://www.avient.com/resources/safety-data-sheets?page=7159
X-AR-444872A-1
XGT 45433-0002A-01-1
Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)
https://www.avient.com/resources/safety-data-sheets?page=7163
XGT 44737-0004A-01-1
XGT 44737-0004B-01-1
Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)
https://www.avient.com/resources/safety-data-sheets?page=3267
X LB-84486-1509-1
REDPWDMB (1% Macrolex Red 5B)
Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)
https://www.avient.com/company/sustainability/sustainability-report/metrics/planet-data-and-metrics
Greenhouse Gas Emissions (MT Scope 1 GHG)**
Greenhouse Gas Emissions (MT Scope 1 & 2 GHG)**
1
https://www.avient.com/knowledge-base/article/thermoplastic-elastomer-tpe-faqs?rtype[]=1164
1.
70° C
22 hrs, 70 hrs, 168 hrs (1 week), 1000 hrs (42 days)
121° C
22 hrs, 70 hrs, 168 hrs (1 week), 1000 hrs (42 days)
https://www.avient.com/investor-center/news/avient-announces-first-quarter-2022-results-connection-announcement-acquire-dsm-protective-materials-dyneema
Attachment 1
Special items (1)
1)
https://www.avient.com/products/advanced-composites/composite-ballistic-protection/glasarmor-ballistic-resistant-panels
Get Help Now
+1-866-737-2066
Level 1
GlasArmor Level 1
https://www.avient.com/resources/safety-data-sheets?page=3628
X HC-2937-001-1 Natural
GREEN (FDA) 484-1071-1
YELLOW 486-30328-1
https://www.avient.com/knowledge-base/article/overmolding-processing
General-purpose screw with compression ratio of 2:1 to 3:1 can be used
Suggested nozzle diameters are 1/16" (0.0625" or 1.59 mm) to 3/16" (0.1875" or 4.76mm)
To achieve the benefits of shear thinning the injection speed should be adjusted to fill the mold in 1 - 3 seconds.
https://www.avient.com/knowledge-base/article/overmolding-processing?rtype[]=1164
General-purpose screw with compression ratio of 2:1 to 3:1 can be used
Suggested nozzle diameters are 1/16" (0.0625" or 1.59 mm) to 3/16" (0.1875" or 4.76mm)
To achieve the benefits of shear thinning the injection speed should be adjusted to fill the mold in 1 - 3 seconds.
