PP OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Dynaflex™ G2706 28A USP Class VI, ISO 10993, Food contact EtO Soft translucent grade, grippy feel Dynaflex™ G2711 43A USP Class VI, ISO 10993, Food contact EtO Highly colorable solution, grippy feel, low compression set Versaflex™ CL2242 & CL2250 42A/ 50A USP Class VI, ISO 10993, US Food contact EtO Clear boilable grades; ABS, PC bondable Versaflex™ G2705 N 60A USP Class VI, ISO 10993, Food contact EtO/Steam High resilience, low compression set Versaflex™ HC3810 20A-90A USP Class VI, ISO 10993 EtO General purpose, unfilled ABS, PC OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versaflex™ OM1040 40A USP Class VI, ISO 10993 EtO Translucent Versaflex™ OM3060 60A USP Class VI, ISO 10993 EtO Clear VERSAFLEX™ CL AND DYNAFLEX™ TPEs OVERMOLDING FOR ERGONOMICS • Adds good tactile surface with soft-touch feel • Available in a variety of color effects and textures • Improves grip, cushion, and comfort • Enhances functional performance like sealing properties, vibration damping, oxygen barrier, and scratch and abrasion resistance • Reduces assembly costs, good processability • Offers excellent adhesion to a wide range of substrates • Glucometers • Medical tools overmolds • Injector pens • Analysis devices VERSALLOY™ HC & VERSAFLEX™ HC TPEs SEALING & RESEALING • Rubbery feel and soft touch • No coring, good puncture, and resealability in static stoppers • Meets low coefficient of friction requirements in dynamic seals • Low extractables • Suitable to overmold onto polyolefins • Sealing and resealing septum • Seals and sanitary gaskets • Syringe plungers and tips MATERIAL DESCRIPTION HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versalloy™ HC 9210-45N 45A USP Class VI EtO Good processability, HC 9210-55N 55A USP Class VI EtO Good processability, HC 9210-70N 70A USP Class VI EtO Good processability, HC 9220-43N 43A USP Class VI, ISO 10993-4/5 EtO Extrusion grade, high temperature resistance Versaflex™ HC 2110-35N 34A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Resealing, elevated comp set Versaflex™ HC 2110-57B 57A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Low stiction VERSAFLEX™ CL AND DYNAFLEX™ TPEs HIGH CLARITY GRADES WITHOUT PLASTICIZERS • Water clear grades formulated without phthalate plasticizers • Meets medical regulatory USP Class VI and ISO 10993-4,5 • Food contact and FDA compliant • Autoclave and radiation stable • Low extractable • High clarity (Haze 50 4.1, 100 4.5, 100 4, 70 6, 70 Tensile Modulus (MPa) 2200 2700 2600 2350 1820 1820 Flexural Strength (MPa) 80 90 104 86 68 68 Flexural Modulus (MPa) 2500 2700 2500 2300 1980 1590 HDT: 0.45, 1.8 (MPa) 110, 80 90, 80 100, 89 123, 100 123, 64 100, 70 UL-94 Rating @ 3.0 mm 5VA V-0 5VA V-0 HB V-0 UL-94 Rating @ 1.5 mm V-0 V-0 5VB V-0 HB V-0 UL-94 Rating @ 0.75 mm V-1 V-2 V-0 None None V-2 COMPETITIVE MATERIAL COMPARISON ENGINEERED POLYMER FORMULATIONS FOR HEALTHCARE TRILLIANT™ HC THERMOPLASTICS The family of Trilliant™ HC high-performance thermoplastics is formulated to meet the growing challenges of medical devices and equipment. MATERIAL DESCRIPTION BASE RESIN Trilliant™ HC2020 Copolyester Trilliant™ HC8910/8920 Polyketone/ABS blend Trilliant™ HC2120 Tritan Trilliant™ HC3120 PC Trilliant™ HC5210 PP Trilliant™ HC6010 PA6 Trilliant™ HC6610 PA66 Trilliant™ GRV-NP-110-W PA12 TRILLIANT™ HC THERMOPLASTICS • Chemically resistant replacement for FR PC/ABS, FR PC/PET & FR COPE, providing UL 94 Yellow Card V-0 flame rating at 1.5 mm, V-1 at 0.75 mm thicknesses for a broad color spectrum • Outperforms PC/ABS, PC/PET and COPE in resistance to common disinfectants • Retains tensile strength after 72-hour exposure to common hospital disinfectants, and shows better long-term chemical resistance as compared to PC blends and COPE • Exhibits good impact and temperature resistance • Available in natural grades, standard medical colors, or custom pre-colored products • Medical device housings • MRI, X-ray, CT scanner components • Surgical instruments such as staplers, dissectors, scissors • Auto-injector pen TRILLIANT™ HC ELECTRICALLY CONDUCTIVE FORMULATIONS • Consistent conductivity ensures repeatable part performance and minimizes failures related to inconsistent electrical conductivity • High flow and easy processing facilitate filling of thin wall parts and multiple cavity tools, which enable faster cycle times and lower per-unit part costs • Superior durability reduces breakage and resultant scrap related costs • Less tendency to flash results in improved appearance and less fluid retention in or on the tip, thus driving greater accuracy and less potential for cross-contamination • High strength produces parts with greater stiffness and warp resistance, again minimizing scrap-related costs • Conductive pipette tips TEST TEMS SPECIFIC GRAVITY MELT FLOW RATE (230OC, 2.16KG) TENSILE FLEXURAL FLEXURAL MODULUS IMPACT STRENGTH NOTCHED, IZOD SURFACE RESISTIVITY Method ASTM D-792 ASTM D-1238 ASTM D-638 ASTM D-790 ASTM D-790 ASTM D-256 ASTM D-257 Unit -- g/10min MPa MPa MPa J/m Ohms/sq.

Benefits of Hydrocerol™ Chemical Foaming Agents They are endothermic chemical foaming agents that provide the following benefits in the injection molding process: Chemical foaming agents versus other technologies PP T20 with physical foaming agent (PFA), large cell structures, thin outer cover layer PP T20 + 3% Hydrocerol concentrate, small cell structures, thick outer cover layer Photo source: Neue Materialen Bayreuth (GmbH) During the activation reaction, chemical foaming agents principally react in two ways: • exothermic • endothermic Exothermic CFAs release more energy during decomposition than needed for the reaction.

*** Pro forma for sale of Performance Products and Solutions segment (PP&S).

*** Pro forma for sale of Performance Products and Solutions segment (PP&S).

Versaflex XP 2850 Hardness, Shore A 53 Specific Gravity 0.89 Color Natural Tensile Strength (psi) 616.4 Elongation at Break (%) 541.4 Viscosity @ 11170/sec (Pa s) 10.9 Dry Kinetic COF 1.256 Wet Kinetic COF 2.463 Increase in COF* (%) 96.1 Abrasion Loss** (mg/cycle) 0.014 Bondability*** PP, PE TECHNICAL PROPERTIES OF VERSAFLEX XP WET GRIP MATERIAL * Pull time = 5 sec; Sled Weight = 203 grams; Rate = 30cm/min ** Weight = 1000 grams; Cycles = 500; Wheel = H-18 *** For bonding to other substrates, please contact Avient COMPARING VERSAFLEX XP 2850 WITH COMMONLY USED WET GRIP MATERIALS 3.00 2.50 2.00 1.50 1.00 0.50 0.00 1.26 2.46 0.85 0.52 0.40 1.20 0.52 0.50 0.52 0.500.50 0.49 Wax Rubber EVA Foam Rubberized Vinyl Versaflex XP 2850 PVC DRY WET Wet/Dry COF Performance *Prepared to standard ASTM D1141-98R21 ps i Du ro m et er (S ho re A )

POLYOLEFINS ALIGNING WITH SUSTAINABILITY GOALS POLYOLEFINS ARE EVERYWHERE Polyethylene (PE) and polypropylene (PP) are among the most popular plastics in the world.

KEY CHARACTERISTICS • Excellent wear resistance • Reduced friction, heat build-up, noise & vibration • Improved processability & surface finish on parts • Lower power requirements & low maintenance • Reduced tool contamination and corrosion • Reduction in lubricant migration time • Design flexibility • Reduced weight • Chemically resistant MARKETS & APPLICATIONS Ideal for applications in many industries including transportation, industrial, household, electrical and electronics including: • Transportation – Fuel flap axis, interior door handle axis, gears, seat mechanics, sun-roof sliding mechanisms, side mirror parts • Industrial – Conveyor belt gears, pulleys • Household – Window/door runners, furniture parts, hinges • Electrical and electronics – Electrical plug safety parts, printers, barcode scanners PRODUCT BULLETIN EUROPE GRADES ASIA GRADES Material Name Base Resin Reinforcing Filler Lubricating Filler LubriOne LB6000-5024 RS HI natural PA6 GF10 UHMWPE Lubrione LB6000-5021 RS S1 GF30 UHMWPE Lubrione LB6000-5021 RS X2 GF30 UHMWPE LubriOne LB6000-5019 X1 black GF50 UHMWPE LubriOne LB6700-5001 RS AF black PA6/PA66 GF50 UHMWPE LubriOne NN-000/01M black SO PA66 Unfilled MoS2 LubriOne REC LB6600-5030 RS grey GF33 Graphite LubriOne LB3300-5010 RS natural PBT GF20 UHMWPE LubriOne LB3300-5005 RS natural MI20 UHMWPE LubriOne REC LB3220-5001 RS C natural X1 PC GF10 UHMWPE LubriOne LB8900-5010 GP grey PKE Unfilled Graphite LubriOne LB8900-5006 RS PE natural GF20 UHMWPE LubriOne LB8900-5004 RS PE natural GF30 UHMWPE LubriOne LB4200-5022 black POM Unfilled MoS2 LubriOne LB4200-5023 natural Unfilled UHMWPE LubriOne LB9200-5012 RS PE natural PPS GF30 UHMWPE Material Name Base Resin Reinforcing Filler Lubricating Filler LubriOne LB6600-8056 LB BK001 PA66 Unfilled LDPE LubriOne LB6600-8054 RS BK001 CF30 LDPE LubriOne LB6600-8052 RS BK001 GF30 LDPE LubriOne LB4200-8032 RS NC001 POM GF30 LDPE LubriOne LB4200-8030 AR NC001 AF10 LDPE LubriOne LB4200-8026 LB BK001 Unfilled LDPE+HDPE LubriOne LB3200-8022 LB BK001 PC Unfilled UHMWHDPE LubriOne LB3200-8021 RS BK001 GF30 UHMWHDPE LubriOne LB7600-8008 RS BK001 PPO GF20 UHMWHDPE Copyright © 2024, Avient Corporation.

Available in opaque or transparent form based on PP resins, either as a concentrate or pre-colored formulation, the colors are standardized to RAL and Pantone color systems.

GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO POLAR SUBSTRATES GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO NON POLAR SUBSTRATES Dynaflex™ G2711 Dynaflex™ G2780 Dynaflex™ G6713 Dynaflex™ G7960 Versalloy™ XL9045 Versaflex™ CL40 Aesthetics Grippy, 43A Low tack, 84A Extra soft, 13A Rubbery, 60A & opaque Matte, 45A & natural Grippy, 40A & water clear Special Characteristics Grippy medical grade PP & PE OM Extra soft General purpose High flow & fast setup Water clear Regulatory FDA, EU & USP VI FDA FDA & EU FDA FDA FDA & EU Overmolding Polypropylene Polypropylene & Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Versaflex™ CL 2250 Versaflex™ OM 3060 Versaflex™ CE 3120-65 Versaflex™ CE 3620 Versollan™ RU 2205 Aesthetics Grippy, 50A & clear Grippy, 59A & clear Silky feel, 65A Silky feel, 65A Grippy, 65A Special Characteristics Clear overmold Clear overmold Abrasion resistance & high strength Low compression set & high flow Abrasion resistance & high strength Regulatory FDA & USP VI FDA & USP VI UL 94 FDA & ISO 10993-10 — Overmolding Polycarbonate Polycarbonate & ABS Polycarbonate, ABS, Copolyester & Nylon 12 Polycarbonate, ABS, Copolyester & Nylon 12 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

KEY CHARACTERISTICS • Designed for Nd:YAG lasers operating between 1060-1070 nm • Available for different polymers including PP, PE, PC, PBT, POM, ABS, MABS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Can be designed for dark marking on natural or white/light colored background or light marking on black/dark background REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request.