Gordon Composites laminates are available in an assortment of colors, inlay options, and lengths from 6" to 120", or rolls up to 1500 feet. Standard and custom shapes and sizes are available with a variety of resins including polyester, vinyl ester, and epoxy, and reinforcements including mat/roving (MR-GFRP) or unidirectional (U-GFRP) fiberglass, or high performance unidirectional carbon fiber.

FIBER-LINE™ PERFORMANCE ENHANCING COATINGS PRODUCT SELECTION GUIDE FIBER-LINE™ COATING SELECTION GUIDE COATING Bondcoat™ Adhesion Enhancing Colorcoat™ Fiber Color Packcoat™ Performance Enhancing Protexcoat™ UV Resistant Swellcoat™ Blocker Water Blocking Swellcoat™ Water Absorbing Wearcoat™ High Abrasion Blockcoat™ Anti-Wicking Repelcoat™ Water Repellant Flamecoat™ Flame Resistant FEATURES • Created for applications where an untreated fiber does not have the ability to provide the appropriate amount of bonding characteristics to another material • Provides adhesion to another fiber or substrate without impacting other performance properties • Improves adhesion of the fiber to the resin matrix it is introduced into • Enables industry standard “burst” tests or stringent delamination analysis • Designed to achieve vibrant colors for safety, identification, and aesthetics • Specialized formulas and binders adhere the pigment to the exterior of the individual filaments, while impregnating deep into the fiber bundle • Available by Pantone or RAL number • Compatible with a variety of composite resins including epoxy, polyurethane, and polyethylene • Stronger than solution-dyed fibers • Designed to add lubricity and temperature resistance at the filament level for braided compression packing • Coating at the fiber level versus the finished braid achieves higher % level coating • Fiber level coating extends the life of the braid and reduces required maintenance • Various formulations available • PTFE, silicone, graphite, and mineral oil • Created for high performance fibers that lack inherent ultraviolet (UV) resistance • Coating impregnates the individual fibers with a specialized resin for improved UV protection • Coating enhancements include UV inhibitors, absorbers and stabilizers • Improves the processing of the product via reduced filament snagging and friction • Low level water- blocking finish for any technical fiber or textile substrate • Provides water- blocked strength reinforcements for dry cable designs • Can absorb 5x to 15x its weight in water • Dust-free coating imparts a very soft fiber hand, advantageous to cable, rope, and other textile processes • Patented technology incorporates super absorbent polymer (SAP) suspended in a proprietary resin matrix • Used in the production of ‘dry-dry’ telecommunications, electromechanical, seismic, umbilical and power cables • Can absorb up to 100x its weight in water • Creates a stable gel when exposed to water • Functionally replaces flooding compounds, filling gels, spun SAF yarns, and water blocking tapes • Enables faster, more economical and robust cable manufacturing • Increases durability and abrasion resistance by encapsulating filaments in the fiber bundle • Extends the life of the product by reducing the effects of friction and yarn on yarn abrasion • Protects the fiber from degradation and filamentation • Ideal for high abrasion and high friction applications in a range of fiber constructions and environments • Wicking refers to the tendency of a yarn or other fiber to draw moisture into filaments via capillary action • Coatings designed to prevent moisture from wicking within and between fibers and strands • Protects Wire or Optical Fiber from damaging effects of moisture, which can cause a drop in signal and attenuation • Hydrophobic additives used to promote and enhance water repellancy in industrial applications • Creates a waterproof barrier that prevents moisture from further migration • Applied at various % levels to optimize for water-proof ratings • Designed to inhibit or slow the spread of fire/flame • Coupled to fibers with inherent flame and thermal resistance to boost performance • Added to fibers with weak flame resistance to improve burn rating SUITABLE FIBERS • Technora® Fiber • UHMWPE • Graphite Fiber • PTFE Fiber • Technora® Fiber • PET Polyester (All shrinks) • UHMWPE • Vectran® LCP • Technora® Fiber • PET Polyester (All shrinks) • PET Polyester (All shrinks) • UHMWPE • PET Polyester (All shrinks) • PET Polyester (All shrinks) • Vectran® LCP • PET Polyester (All shrinks) PRODUCTS • Belt & Hose Reinforcement Yarn • Braided compression rings and seals • Valve stem packing • Pump packing • Filler Yarn • Synthetic Wire Rope • Buffer Thread • Filler Yarn • FRP Rod • Synthetic Wire Rope Kevlar® and Nomex® are trademarks of DUPONT SAFETY & CONSTRUCTION, INC.

Available in masterbatch pellets, powder form or liquid, they utilize endothermic, exothermic or an endothermic/ exothermic blend of chemistries to fit the required applications. Chemistries and gas initiation temperatures are available for a wide range of resins.

A range of standard and customized solutions conforming to UL 94 V-2, V-0 and 5VA performance ratings are available. KEY CHARACTERISTICS • UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings • GWFI (IEC 60695-11-10) up to 960°C • Comparative Tracking Index (CTI) PLC 0, 600V ratings • Injection molding and extrusion grades • Non-halogen grades available • Low dielectric performance with selected formulations • Good recyclability • Colorable MARKETS & APPLICATIONS Applications that require flame retardant performance including: • Transportation: Interior components, seat components, door panels, aircraft interiors, railway interiors, boat interiors • Construction & Building Materials: Cable insulation, pipes and fittings, insulation materials • Consumer – Appliance casings, housings, covers, fume hoods, battery packages, furniture • Industrial Equipment: Machine housings • Energy, Electrical & Electronic, E-Mobility: Battery frames, electrical housings, connectors • Telecommunication: Cable management • Packaging: Transportation of sensitive goods • Healthcare: Medical device housings and components PRODUCT BULLETIN MAXXAM FR FLAME RETARDANT POLYOLEFIN FORMULATIONS Non-halogenated Halogenated PP Homopolymer Copolymer Homopolymer Copolymer Unit Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Characteristic Talcum Talcum Talcum Talcum Reinforcement Mass-% 0 5–30 5–30 0 20–30 5-20 0 5–30 5–20 0 5–30 5–20 Colorable – ++ ++ + ++ ++ + + + + + + + Density g/cm3 0,9–1,08 1,28–1,37 0,98–1,55 0,92–1,06 1,25–1,35 0,95–1,28 0,94–1,04 1,3–1,55 1,01–1,42 0,96–1,01 0,94–1,58 0,95–1,46 Tensile Strength MPa 25–30 30–70 25–35 16–22 40–65 15–25 25-–35 30–70 25–35 20–24 20–55 -25 E-Modulus (Tensile) MPa 1600–2500 2500–8200 2500–4000 800–1200 2000–8000 1600–3000 1300–2000 3000–8900 1900–3500 1000–1400 1200–7500 1500–3000 Izod Impact 23°C notched % 2,0–4,5 3,5–7,5 2,5–4,5 5–40 2,5–18 2,5–6 2,5–4,5 3,5–6,0 3,0–7,0 4,0–40 2,5–16 2,5–10 Max.

Joule additive is available as a 10% concentrated dispersion, made up solely of 10% active component with 90% PET grade mono ethylene glycol (MEG). Joule RHB additive is available in a small number of varying package types and weights.

COLORANT DISPERSIONS RUBBER COLORANT DISPERSIONS Stan-Tone™ MB/MC & EP Stan-Tone™ MB/MC & EP are pigment dispersions for rubber systems, available in customizable binder systems suited for nitrile, EPR, EPDM, SBR, natural rubber, CPE and EVA compounds Applications: industrial goods, auto mats, rubber flooring, sponge rubber, wire and cable URETHANE COLORANT DISPERSIONS Polyester Urethane Paste Colorants: Stan-Tone™ PEP Stan-Tone™ PEP colorants are reactive and compatible with polyester systems, reacting to become part of the final cured product Applications: cast urethane wheels, industrial rollers, rigid foams, adhesives, laminates, pultrusion, glass reinforced composites, coated fabrics Polyether Urethane Paste Colorants: Stan-Tone™ ET Stan-Tone™ ET colorants for urethane are compatible with polyether systems, reacting to become part of the final cured product Applications: flexible foam, cast-able rolls and wheels, adhesives and laminates EPOXY COLORANT DISPERSIONS Stan-Tone™ EPX Stan-Tone™ EPX consists of selected pigments dispersed in a Bisphenol A undiluted epoxy resin with an epoxide equivalent of 185 Applications: protective coatings, adhesives, epoxy flooring, electrical potting and laminates VINYL COLORANT DISPERSIONS Stan-Tone™ VC & VCP Stan-Tone™ VC and VCP are products based on single pigment or multi-pigment blends and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: profile extrusions, decking, outdoor furniture, calendaring applications Plasticizer-Based Colorants for Vinyl Paste: Stan-Tone™ HCC Stan-Tone™ HCC dispersions consist of selected pigments dispersed in diisodecyl phthalate plasticizer (DIDP) and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: coated fabric, vinyl sealants, adhesives, wall coverings, toys and sporting goods SILICONE COLORANT DISPERSIONS Liquid Silicone Colorants: Silcopas™ Stan-Tone™ SP or FSP (FDA-compliant) Silcotec™ SL Stan-Tone™ HC Plus LSR (class VI certified) Silicone paste colorants are single pigment or custom- made dispersions using a silicone carrier specially developed for liquid silicone rubber (LSR) injection molding applications Applications: infant care, toys, seals, gaskets and medical equipment High Consistency Silicone Rubber Colorants: Silcogum™ Silcotec™ S Stan-Tone™ SMB Stan-Tone™ HC Plus HCR (class VI certified) Silicone rubber colorants are made with a silicone elastomer gum binder resulting in cuttable masterbatches or slabs for ease of handling, especially for 2-roll, open-mill mixing Applications: mechanical seals, keypads, gaskets, wire and cable jacketing Room Temperature Vulcanization Colorants: Silcopas™ RTV and Stan-Tone™ SP Silcopas™ RTV and Stan-Tone™ SP colorants offer a standard line of single pigment or custom made dispersions using a low viscosity dimethyl fluid specially developed for room temperature vulcanization (RTV) rubber Applications: caulks, sealants, adhesives WATER-BASED COLORANT DISPERSIONS Water-Based Liquid Colorants: Stan-Tone™ WDN Stan-Tone™ WDN water dispersions are high-solids organic or inorganic pigment dispersions designed to help meet standards for dispersion including pH levels and strength and shade Applications: dipped latex balloons and gloves, coatings and adhesive systems ADDITIVE AQUEOUS ADDITIVE DISPERSIONS Aquamix™ Aquamix™ chemical dispersions are a full line of dispersed and emulsified curatives, antioxidants, fillers, vulcanizers, optical brighteners, flame retardants, UV stabilizers and tackifiers Applications: adhesives and latex compounding, curatives SILICONE ADDITIVE DISPERSIONS Electrically Conductive Additives for Silicone: Silcosperse™ EC Silcosperse™ EC electrically conductive additives provide high conductivity and lower filler loadings Applications: resistors, printable electronics, flexible electronics, insulator depolarizers Laser Marking Additives for Silicone: Silcosperse™ LM Silcosperse™ LM laser marking additives are dispersions that contain laser absorbers and color formers that eliminate the need for secondary etching Applications: medical device housings, electronic device housings, wire and cable jacketing Peroxide Additives for Silicone: Silcocat™ Silcocat™ dispersions can improve silicone molding process by stabilizing silicone peroxide compound levels Applications: automotive hoses, seals, gaskets Heat Stabilizer Additives for Silicone: Silcosperse™ The Silcosperse™ family of heat stabilizing additives provide a high quality dispersion into silicone designed to enhance heat resistance of silicone compounds Mold Release Additives for Silicone: Silcosperse™ IMR Silcosperse™ IMR is an internal mold release dispersion designed to be added to the silicone or fluorosilicone compound to facilitate the de-molding of finished parts Acid Acceptor Additives for Silicone: Silcosperse™ 180 Silcosperse™ 180 acid acceptor is a premium dispersion used to neutralize acid by-products generated by certain peroxides Viscosity Modifiers for Silicone: Silcosperse™ 237 Silcosperse™ 237 modifier dispersions are designed to raise or control the viscosity without changing solid content SPECIALTY PRODUCTS DRY POWDER COLORANTS Stan-Tone™ D and Stan-Tone™ DC Stan-Tone™ D and Stan-Tone™ DC are dry powder pigments available in a range of hues and chemical types WET OR DRY BLEND COLORANTS Stan-Tone™ DB Stan-Tone™ DB dry blend colorants provide enhanced performance over dry colors, resulting in uniform critical pigment weight ratios for improved color control SELF-BONDING SILICONE Silcotec™ SCB Silcotec™ SCB self-bonding silicone solutions allow silicone to bond to various substrates without prime coating To learn more about our colorant & additive dispersions, please contact us at +1.844.4AVIENT (1.844.428.4368) or visit www.avient.com.

With a wide range of color options and the availability of both slab and cube forms, Stan-Tone RBX can be formulated to meet specific customer requirements. KEY CHARACTERISTICS • Rigidly controlled process for lot-to-lot consistency • Formulated for excellent dispersion • Ease of handling • Customizable binder systems • Available in slab and cube forms APPLICATIONS Stan-Tone RBX Rubber Dispersions are suitable for a variety of applications within end markets such as: • Building and construction • Consumer • Healthcare • Packaging • Transportation Typical rubber applications include: • Industrial goods • Automotive mats • Flooring • Sponge rubber • Wire and cable applications Stan-Tone Pigment Approx. % Specific Color Heat WHITE 10MB03 Titanium Dioxide, Rutile 60 1.74 PW-6 1 I/O SBR 10EP03 Titanium Dioxide, Rutile 60 2.33 PW-6 1 I/O EPDM YELLOW 12MB01 (a) Diarylide AAOT GS 48 1.23 PY-14 3 I SBR 12MB02 (a) Diarylide AAOA GS 50 1.15 PY-17 3 I SBR 12MB03 (a) Diarylide HR RS 50 1.16 PY-83 2 I/O (Mass) SBR 12MB09 (a) Diarylide AAA RS 50 1.21 PY-12 3 I SBR 12MB10 (a) Diarylide AAMX RS 30 1.22 PY-13 3 I SBR 13MB03 Benzimidazolone GS 50 1.15 PY-151 2 I/O (Mass) SBR 81MB01 (c) Iron Oxide 65 1.84 PY-42 2 C I/O SBR 12EP01 (a) Diarylide AAOT GS 47 1.16 PY-14 3 I EPDM 12EP03 (a) Diarylide HR RS 43 1.17 PY-83 2 I/O (Mass) EPDM 12EP09 (a) Diarylide AAA RS 47 1.14 PY-12 3 I EPDM 81EP01 Iron Oxide 65 1.78 PY-42 2 C I/O EPDM ORANGE 15MB01 Pyrazolone YS 23 1.23 PO-13 2 I/O (Mass) SBR 15MB05 Dianisdine RS 40 1.11 PO-16 3 I/O (Mass) SBR 15MB06 Benzimidazolone RS 50 1.18 PO-36 2 I/O SBR 15MB07 Benzimidazolone YS 50 1.19 PO-64 2 I/O SBR 15EP01 Pyrazolone YS 23 1.16 PO-13 2 I/O (Mass) EPDM 15EP05 Dianisdine RS 43 1.07 PO-16 3 I/O (Mass) EPDM RED 20MB01 (b) Red Lake C YS 50 1.27 PR-53:1 3 I SBR 22MB01 (b) Lithol Rubine BS 42 1.19 PR-57:1 3 I SBR 23MB06 Specialty Naphthol BS 50 1.11 PR-170 2 I/O (Mass) C SBR 23MB07 Specialty Naphthol YS 50 1.13 PR-170 2 I/O (Mass) C SBR 25MB12 Red 2B, Ca Salt BS 49 1.25 PR-48:2 2 I/O (Mass) SBR 26MB03 (c) Pyrazolone YS 41 1.09 PR-38 2 C I/O (Mass) SBR 28MB02 Red 2B, Ba Salt YS 50 1.38 PR-48:1 2 I/O (Mass) SBR 82MB01 (c) Iron Oxide, Light BS 60 1.68 PR-101 1 I/O SBR 82MB02 (c) Iron Oxide, Dark VBS 60 1.8 PR-101 1 I/O SBR 82MB04 (c) Iron Oxide, Light VYS 60 1.83 PR-101 1 I/O SBR 82MB05 (c) Iron Oxide, Light YS 60 1.84 PR-101 1 I/O SBR 20EP01 (b) Red Lake C YS 50 1.23 PR-53:1 3 I EPDM Stan-Tone Pigment Approx. % Specific Color Heat RED 23EP06 Specialty Naphthol BS 50 1.06 PR-170 2 I/O (Mass) C EPDM 25EP12 Red 2B, Ca Salt Bs 49 1.2 PR-48:2 2 I/O EPDM 26EP03 Pyrazolone YS 41 1.03 PR-38 2 C I/O EPDM 28EP02 Red 2B, Ba Salt YS 50 1.33 PR-48:1 2 I/O EPDM 82EP02 Iron Oxide, Dark VBS 59 1.7 PR-101 1 I/O EPDM 82EP04 Iron Oxide, Light VYS 60 1.73 PR-101 1 I/O EPDM BLUE 40MB05 (c) Phthalocyanine GS 48 1.19 PB-15:3 1 I/O SBR 40MB08 (c) Phthalocyanine RS 52 1.27 PB-15 1 I/O SBR 40MB10 (c) Phthalocyanine RS-NC 48 1.22 PB-15:1 1 I/O SBR 40MB02 Ultramarine 51 1.35 PB-29 1 I/O SBR 40EP05 Phthalocyanine GS 44 1.14 PB-15:3 1 I/O EPDM 40EP08 Phthalocyanine RS 49 1.23 PB-15 1 I/O EPDM 40EP10 Phthalocyanine RS-NC 48 1.11 PB-15:1 1 I/O EPDM 42EP02 Ultramarine GS 50 1.27 PB-29 1 I/O EPDM GREEN 50MB05 Blend (Yellow/Blue) 48 1.21 N/A 3 I SBR 51MB01 (c) Phthalo Brominated VYS 50 1.4 PG-36 1 I/O SBR 51MB03 (c) Phthalocyanine YS 47 1.34 PG-7 1 I/O SBR 51MB05 (c) Phthalocyanine BS 50 1.46 PG-7 1 I/O SBR 59MB01 Chromium Oxide 69 2.17 PG-17 1 I/O SBR 50EP05 Blend (Yellow/Blue) 48 1.16 N/A 3 I EPDM 51EP01 Phthalo Brominated VYS 44 1.37 PG-36 1 I/O EPDM 51EP03 Phthalocyanine YS 47 1.33 PG-7 1 I/O EPDM 51EP05 Phthalocyanine Bs 45 1.37 PG-7 1 I/O EPDM 59EP01 Chromium Oxide 71 2.12 PG-17 1 I/O EPDM VIOLET/MAGENTA 24MB03 Quinacridone Violet 30 1.06 PV-19 2 I/O SBR 24MB04 Ultramarine Violet 60 1.59 PV-15 1 I/O SBR 24MB06 Benzimidazolone 40 1.08 PV-32 2 I/O SBR 24MB07 Carbazole Violet 40 1.25 PV-23 2 I/O SBR 24EP03 Quinacridone Violet 31 1 PV-19 2 I/O EPDM 24EP07 Carbazole Violet 14 1.34 PV-23 2 I/O EPDM Stan-Tone Pigment Approx. % Specific Color Heat BROWN 83MB01 (c) Iron Oxide, Tan HR 60 1.78 PBr-11 1 I/O SBR 83MB02 (c) Iron Oxide, Light 68 2.1 PBr-6 2 C I/O SBR 83MB03 (c) Iron Oxide, Dark 60 1.83 PBr-6 2 C I/O SBR 83EP02 Iron Oxide, Light 69 1.98 PBr-6 2 C I/O EPDM 83EP03 Iron Oxide, Dark 69 1.98 PBr-6 2 C I/O EPDM BLACK 90MB01 (c) Furnace N-330 31 1.2 PBk-7 1 I/O SBR 90MB05 (c) Iron Oxide 60 1.8 PBk-11 2 C I/O SBR 90EP01 Furnace Black 33 1.05 PBk-7 1 I/O EPDM 90EP05 Iron Oxide 55 1.56 PBk-11 2 C I/O EPDM ALUMINUM 61MB01 Aluminum 70 1.5 PM-1 1 I/O SBR 61EP01 Aluminum 60 1.31 PM-1 1 I/O EPDM RS = Red Shade YS = Yellow Shade VYS = Very Yellow Shade BS = Blue Shade VBS = Very Blue Shade GS = Green Shade NC = Non-Crystallizing HR = Heat-Resistant (a) = Potential Migration at Low Use Levels (b) = Poor Alkali Resistance - Not Recommended for Open Steam Cure (c) = Six Month Shelf Life LIGHTFASTNESS I = Indoor Only I/O = Indoor or Outdoor Mass = Outdoor Masstone Application Only C = Some Caution Advised HEAT STABILITY 1 = Above 400°F 2 = 350°F–400°F 3 = Below 350°F C = Some Caution Advised 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Stronę infolinii ds. etyki https://www.Avient.com/company/policies-and- governance/ethics-hotline Telefoniczna 1-877-228-5410 7 mailto:ethics.officer%40avient.com? subject= http:// avient.ethicspoint.com http://www.Avient.com/company/policies-and-governance/ethics-hotline http://www.Avient.com/company/policies-and-governance/ethics-hotline 1. Natychmiast po wyjściu napisz notatkę dotyczącą czasu, miejsca i stron biorących udział w dyskusji, podpisz ją i opatrz datą oraz przekaż Działowi prawnemu Avient

Saluran Langsung Etika https://www.Avient.com/company/policies-and- governance/ethics-hotline Telepon 1-877-228-5410 7 mailto:officer%40avient.com? subject= http://avient.ethicspoint.com http://www.Avient.com/company/policies-and-governance/ethics-hotline http://www.Avient.com/company/policies-and-governance/ethics-hotline 1. ✓ Dokumentasikan sumber dan tanggal penerimaan semua daftar harga pesaing dan data kompetitif lainnya yang terkandung dalam berkas Anda

Buyer acknowledges that information in Seller’s marketing materials, technical data sheets and other descriptive publications distributed or published on its websites may vary from time to time without notice. Buyer acknowledges that Seller has furnished to Buyer Safety Data Sheets, which include warnings together with safety and health information 15. Buyer acknowledges and represents that it is familiar with and shall strictly comply with all applicable laws and regulations concerning the trade, export or re-export of products, services, data or technology (“Items”), including, but not limited to, the International Traffic in Arms Regulations (ITAR), the Export Administration Regulations (EAR), the trade sanctions regulations administered by the U.S.