Did you know that with the right formulation, you can achieve properties that are as good or better than that of PA 6,6 using materials such as PA 6, PK, PBT/PET, PP, polymer blends and even post-industrial recycled blends? HOW ALTERNATIVE POLYMERS COMPARE TO PA 6,6 PA 6 | POSSIBLE APPLICATIONS: Automotive, Industrial, Consumer & Sporting Goods Wider processing temperature range Better surface quality Better weathering resistance Shorter conditioning time—nearly half that of PA 6,6 Lower temperature resistance Slightly lower chemical resistance Higher water absorption Lower stiffness/wear resistance PK | POSSIBLE APPLICATIONS: Automotive, Consumer & Sporting Goods, Industrial, Electrical & Electronics Lower CO2 emissions in production Better hydrolysis and chemical resistance Comparable dimensional stability Inherently lubricious for reduced wear and friction Easier to mold Cost competitive Lower short- and long-term thermal performance Harder to color More limited process window PBT/PET | POSSIBLE APPLICATIONS: Electrical & Electronics Lower water absorption Slightly higher rigidity/stiffness (for PBT) Better abrasion resistance Slightly better electric resistance Lower toughness properties Higher density Lower short- and long-term temperature resistance Lower hydrolysis resistance PP | POSSIBLE APPLICATIONS: Automotive, Consumer Goods, Lightweighting Applications Lower water absorption Slightly better chemical resistance Lower density Cost effective Fiber reinforced PP can achieve similar or better mechanical properties to PA 6,6 GF30 Reduced rigidity/stiffness Much lower abrasion resistance Lower electric resistance Reduced short- and long-term temperature resistance PC/PBT & PC/PET BLENDS | POSSIBLE APPLICATIONS: Automotive Interiors, Consumer Goods, Household Appliances Higher impact strength Good scratch resistance Good wear resistance Lower mechanical properties Higher brittleness Narrow processing temperature range PA 6,6/PET BLENDS | POSSIBLE APPLICATIONS: Automotive, Industrial, Appliance, Electrical & Electronics, Applications Where Low Water Absorption is Required Reduced water absorption—up to 40% Slightly higher mechanical properties in the conditioned state Slightly lower temperature resistance Slightly lower chemical resistance Narrow processing temperature range PA/PP BLENDS | POSSIBLE APPLICATIONS: Automotive Interiors, Electronics, Consumer & Sporting Goods Good adhesion to polyolefin-based TPEs Low permeability of water Good processability Lower density Lower temperature resistance Lower mechanical properties POST-INDUSTRIAL RECYCLED SOLUTIONS (PA 6,6/PA 6/PP) | POSSIBLE APPLICATIONS: Automotive Accessories, Industrial, Consumer & Sporting Goods Between 50-80% recycled content Good processability Cost effective Reduced chemical resistance Wider range of mechanical specifications Potential for slightly lower mechanical properties 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Available in a range of colors, the impact-modified nylon 6 formulation is customizable to serve a variety of consumer applications, including powersports, lawn & garden, and marine. Impact-modified nylon (PA6) grade formulated for cold temperature impact resistance and heat resistance. Discover comparison data and key properties of high-gloss Artisan™ pre-colored nylon (PA6) formulations

ROTORGRAU UV_AUDI PA6 GRANITGRAUUV_AUDI PA6 PP FR 8-6 LMS-1000

Complēt™ 50% long glass fiber reinforced specialty PA66 thermoplastic replaces die-cast aluminum Environmentally stabilized nylon 6 and 6/6 long fiber composites for application intermittently exposed to water high humidity that require consistent structural performance Long fiber reinforced nylon 6 or 66 thermoplastics formulated for more consistent performance in moisture-rich conditions.

Examples of semi-crystalline polymers are PP, polyethylene (PE), PA6, PA66, polyphthalamide (PPA), polybutylene/polyethylene terephthalate (PBT/PET), polyoxymethylene (POM) or acetal, polyphenylene sulfide (PPS), and polyether ether ketone (PEEK). 6.

ORANGE 172C PA6 ORANGE 172C PA6 PP FR 8-6 LMS-1000

POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. TYPICAL PROPERTIES - MULTI-AXIAL LAMINATES 0° Testing Orientation 90° Testing Orientation Product Name Resin Fiber Content Laminate Layers & Orientation Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0/90 0.20 29.49 1000 0.031 0.79 - - - - 2020 13.9 59.7 412 - - - - 2020 13.9 59.7 412 0/90/0 0.31 44.24 1500 0.045 1.14 2250 15.5 46.4 320 3070 21.2 79.4 547 186 1.3 9.7 67 1330 9.2 39.6 273 0/90/90/0 0.41 58.98 2000 0.057 1.45 2000 13.8 44.0 303 2400 16.5 60.6 418 496 3.4 20.7 143 2210 15.2 56.4 389 6531 65 0/90 0.10 14.80 502 0.014 0.36 - - - - 2240 15.4 60.9 420 - - - - 2240 15.4 60.9 420 0/90/0 0.15 22.20 753 0.020 0.50 2650 18.3 58.3 402 3100 21.4 82.8 571 280 1.9 NB2 NB2 1670 11.5 42.5 293 0/90/90/0 0.21 29.61 1004 0.027 0.68 2260 15.6 51.5 355 2470 17.0 62.2 429 580 4.0 30.4 210 2310 15.9 59.6 411 6536 0/90 0.14 20.71 702 0.021 0.53 - - - - 1980 13.7 60.5 417 - - - - 1980 13.7 60.5 417 0/90/0 0.22 31.06 1053 0.029 0.74 2309 15.9 48.3 333 2730 18.8 81.5 562 245 1.7 13.0 90 1490 10.3 44.3 305 0/90/90/0 0.29 41.41 1404 0.037 0.94 2164 14.9 47 324 2170 15.0 59.6 411 512 3.5 25.4 175 2340 16.1 71.2 491 6538 0/90 0.27 39.54 1341 0.034 0.86 - - - - 2220 15.3 60.0 414 - - - - 2220 15.3 60.0 414 0/90/0 0.41 59.53 2018 0.057 1.44 2825 19.5 40.9 282 2780 19.2 67.6 466 218 1.5 10.2 70 1410 9.7 40.0 276 0/90/90/0 0.55 79.37 2691 0.073 1.85 1880 13.0 32.4 223 2060 14.2 54.0 372 478 3.3 18.0 124 2360 16.3 61.0 421 7034B PP-Black 70 0/90 0.14 20.48 694 0.016 0.40 - - - - 2680 18.5 62.0 427 - - - - 2680 18.5 62.0 427 0/90/0 0.21 30.72 1041 0.028 0.71 1750 12.1 55.9 385 3710 25.6 75.1 518 160 1.1 11.3 78 1440 9.9 36.2 250 0/90/90/0 0.28 40.95 1388 0.036 0.90 1700 11.7 40.4 279 2800 19.3 55.7 384 432 3.0 25.4 175 2350 16.2 52.4 361 6020 PE 60 0/90 0.17 23.90 810 0.023 0.57 - - - - 1830 12.6 52.00 359 - - - - 1830 12.6 52.0 359 0/90/0 0.25 35.86 1216 0.033 0.84 2265 15.6 40.0 276 2740 18.9 68.2 470 181 1.2 10.0 69 1350 9.3 35.3 243 0/90/90/0 0.33 47.81 1621 0.044 1.12 1810 12.5 30.0 207 2000 13.8 48.0 331 502 3.5 22.0 152 1820 12.5 46.0 317 6621 66 0/90 0.19 27.94 947 0.025 0.65 - - - - 2280 15.7 60.0 414 - - - - 2280 15.7 60.0 414 0/90/0 0.29 41.90 1421 0.040 1.01 2490 17.2 37.0 255 2900 20.0 70.0 483 165 1.1 9.7 67 1440 9.9 38.0 262 0/90/90/0 0.39 55.87 1894 0.053 1.35 1810 12.5 29.0 200 2160 14.9 58.0 400 508 3.5 21.0 145 2170 15.0 53.0 365 5843 PETG 58 0/90 0.16 23.70 804 0.020 0.50 - - - - 2050 14.1 59.6 411 - - - - 2050 14.1 59.6 411 0/90/0 0.25 35.55 1205 0.030 0.76 2800 19.3 89.0 614 2900 20.0 78.0 538 397 2.7 NB2 NB2 1580 10.9 42.5 293 0/90/90/0 0.33 47.40 1607 0.039 0.99 2540 17.5 72.0 496 2300 15.9 57.7 398 780 5.4 35.0 241 2170 15.0 63.0 434 5840B aPET-Black 58 0/90 0.18 26.01 882 0.021 0.53 - - - - 2530 17.4 55.3 381 - - - - 2530 17.4 55.3 381 0/90/0 0.27 39.01 1323 0.032 0.82 2986 20.6 91.1 628 3160 21.8 68.7 474 252 1.7 20.0 138 1580 10.9 36.9 254 0/90/90/0 0.36 52.01 1763 0.042 1.07 3065 21.1 73.1 504 2570 17.7 54.2 374 813 5.6 37.0 255 2440 16.8 55.6 383 5860B PA6-Black 58 0/90 0.16 22.95 778 0.021 0.52 - - - - 2190 15.1 56.00 386 - - - - 2190 15.1 56.0 386 0/90/0 0.24 34.43 1167 0.034 0.86 2510 17.3 117.0 807 2760 19.0 63.7 439 657 4.5 22.2 153 1630 11.2 39.7 274 0/90/90/0 0.32 45.91 1556 0.046 1.18 2210 15.2 106.0 731 2090 14.4 45.6 314 1110 7.7 50.8 350 2150 14.8 57.4 396 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. Unidirectional Tape 3-Ply 0˚/90˚/0˚ 6-Ply X-Ply™ 0˚/90˚ 4-Ply 0˚/90˚/90˚/0˚ Honeycomb Core, X-Ply™ Skins Uni Tape with Scrim 10-Ply with Film LAMINATION LAY-UP CONFIGURATIONS 4-Ply 90˚/0˚/0˚/90˚ with Film 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

Formulated with PET, PBT, PA 6 carriers​

PA 6 30 H PP FR 8-6 LMS-1000

OnForce™ PA 6/6, PP and TPU compounds and processing conditions