KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates or formulations REGULATORY SUPPORT • Pre-tested raw materials: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS EBM/IBM CONTAINERS CLOSURES FILM COMBINATION DEVICES Clarifying PP Sorbitol-free—possibilities in packaging ocular solutions    Slip/torque reduction Slip for PE, PP films, processing aid, torque reduction for closures   Protection from UV in transparent packaging for PP, PE, PETG, COP UV blocking in 290–450nm with no impact on clarity    Antistatic ready-to-use solution for PE films e.g. for API handling Permanent/non-migrating; fast decay time independent of % relative humidity  Antistatic masterbatch for PE films Cost effective, long-lasting, migrating type but with biological evaluation  Gamma/e-beam sterilization protection of the polymer Preserving the properties of PP and COC/COP. Reduction in yellowing using Color Compensation Technology (CCT)   Reduced material consumption/cycle time/improved properties—nucleation Fast acting new generation nucleant for PE and PP; improved dimensional stability, thermal and mechanical properties    Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser    Antiblock for PE/PP film Non-migrating additive system maintaining high gloss and printability  Antioxidants for PE, PP, TPE Thermal protection during converting/ downstream sterilization     Brand protection/ anticounterfeit Range of covert and non-covert systems    Volatiles/odor absorber for PE/PP Physical absorption of a wide range of molecules responsible for odor, VOC and potential extractables/ leachables in plastics   Healthcare use limitations apply—see below.

For example, a TPE that can bond to PC does not bond to PP, vice versa. The failure mode is cohesive on PP and adhesive on all other substrates. TPE-1A adhesion values overmolded onto PP, PC and ABS over a wide range of melt temperatures.

These include PE, PP, ABS, SAN, PC/ABS, PC, PA6, 66 and 12, cyclic olefins (COP), high performance polymers, and elastomers such as EVA, SEBS, TPU and PEBA. APPLICATION PORTFOLIO DESCRIPTION General use Opaque and transparent colors in PP, PE, COC, ABS, POM, PC, TPU, PEEK, and more Needle hubs and cannulae Opaque and translucent colors evaluated to ISO 6009 Ophthalmic caps and closures 13 standard colors in PE matched to American Academy of Ophthalmology; biologically evaluated to USP standard White pharmaceutical packaging White colorants for PE, HDPE, PP covering solid dose to nasal packaging needs Amber pharmaceutical packaging Pre-tested amber colorants LSR silicones For LSR silicones and transparent color PET/PP (e.g. amber) FUNCTIONALITY ADDITIVE PERFORMANCE UV protection in transparent packaging Blocks UV in 290–450nm for PP, PE, PETG, COP Processing aid/friction reduction Optimizes processing for PE, PP, ABS, POM—non-migrating Nucleation for reduced material consumption/cycle time Improves thermal and mechanical properties of PE and PP and allows wall thinning to support sustainability Clarifying Improves clarity of transparent PP applications with reduced migration and improved thermal stability—sorbitol-free Laser marking/welding Activates the polymer to absorb Nd-YAG laser for fast reliable marking/assembly Gamma/e-beam sterilization Preserves the properties of PP and COP, reduces yellowing and compensates for discoloration Anti-static Reduces static buildup in applications such as films in API handling and inhaler spacers/nebulizers Antioxidant Provides thermal protection during converting/ downstream sterilization Anti-counterfeit/brand protection Covert and non-covert systems SUPPORTING SUSTAINABILITY TARGETS As the need to integrate sustainability in the design of healthcare products is growing, manufacturers of medical devices, diagnostic products and pharmaceutical packaging are looking for materials with a more environmentally friendly profile. The cycle time in injection molding can be reduced (10–15% in PP) to support higher output and less energy consumption.

Available in four overmolding grades compatible with polypropylene (PP), and one grade that is suited for overmolding onto ABS, all grades are formulated for durability, delivering property retention and UV resistance comparable to traditional TPEs. Peel (N/mm) 3.2 2.9 3.2 3.2 3.1 3.2 3.1 Failure Mode Cohesive Cohesive Cohesive Cohesive Cohesive Cohesive Cohesive KEY PROPERTIES AND OVERMOLD PERFORMANCE reSound™ OM 5510 grades for overmolding onto PP and reSound OM 5520 for ABS reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N reSound OM 5520-55N Bio-derived Content (%) 40% 40% 50% 50% 49% Hardness, Shore A 30 45 60 70 54 Specific Gravity 0.88 0.88 0.89 0.89 0.95 50% Modulus, PSI 96 153 247 384 258 100% Modulus, PSI 137 251 343 462 353 Tensile Strength, PSI 264 438 625 608 637 Elongation, % 280 215 306 271 319 Tear Strength, PLI 58 84 109 132 146 OM Substrate PP PP PP PP ABS OM Avg. Peel, PLI 12 19 23 20 19 reSound OM 5510 for PP reSound OM 5510-60N Room Temperature 70C Bio-derived Content (%) 50% 50% 50% 50% 50% 50% 50% Hardness, Shore A 60 60 60 60 60 60 60 Specific Gravity 0.89 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 247 241 244 251 234 244 240 100% Modulus, PSI 343 333 338 339 321 331 326 Tensile Strength, PSI 625 621 647 610 633 662 642 Elongation, % 306 314 309 313 312 315 315 Tear Strength, PLI 109 108 113 113 111 117 115 reSound OM 5520-55N Room Temperature 70C Bio-derived Content (%) 49% 49% 49% 49% 49% 49% 49% Hardness, Shore A 54 54 55 55 54 55 56 Specific Gravity 0.95 0.95 0.96 0.96 0.95 0.96 0.96 50% Modulus, PSI 258 256 256 265 266 271 257 100% Modulus, PSI 353 355 357 362 373 379 367 Tensile strength, PSI 637 615 637 669 651 674 642 Elongation, % 319 315 319 333 313 319 315 Tear Strength, PLI 146 136 133 142 137 138 141 reSound OM 5510-45N Room Temperature 70C Bio-derived Content (%) 40% 40% 40% 40% 40% 40% 40% Hardness, Shore A 45 46 47 46 46 45 45 Specific Gravity 0.88 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 153 158 154 162 137 136 133 100% Modulus, PSI 251 259 259 261 226 222 218 Tensile Strength, PSI 438 481 451 495 417 470 486 Elongation, % 215 240 211 243 204 227 238 Tear Strength, PLI 84 81 87 82 83 85 84 AGING – PROPERTY RETENTION • Tested at room temperature and 70° C for comparison • Hardness, tensile strength elongation and modulus showed great retention Overmolding onto PP Overmolding onto ABS RHEOLOGY Suitable for injection molding and overmolding 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5520-55N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s Capillary viscosity at 200°C Capillary viscosity at 200°C reSound OM 5510 for PP reSound OM 5520 for ABS www.avient.com Copyright © 2020, Avient Corporation.

MEVOPUR COLORANTS • Standard colors in PP and PE to shorten time-to-market • Custom colors matched to Pantone, RAL or other color reference • White colorants for pharmaceutical packaging for LDPE, HDPE and PP with opacity to reach USP chapter MEVOPUR FUNCTIONAL ADDITIVES • Antistatic formulation with good flow/impact for injection molding • Amide- and amine-free antistatic for film in contact with API (Active Pharmaceutical Ingredients) • UV blocking for transparent PP and PE packaging to meet USP chapter • Non-migrating friction reduction/processing aid for PE and PP • Laser marking/welding additive for fast, reliable marking/assembly • MVTR (Moisture Vapor Transmission Rate) reduction for HDPE to improve shelf-life • Thermal protection of the polymer during processing • Gamma/e-beam sterilization protection for PP (up to 50kGy) with color compensation for reduced yellowing REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request Bormed™ is a registered trademark of Borealis Healthcare use limitations apply—see below.

PRODUCT BULLETIN VERSAFLEX™ GP 2810-40N AM VERSAFLEX™ CE 3120-65* AM ONFLEX™ LO 7120-45 AM Applications Personal care grips Consumer packaging Consumer electronics Charging stations HVAC seals Cup holder mats Color Natural Natural Natural Durometer, Shore A 45 66 45 Specific Gravity (kg/m3) 0.87 1.14 1.13 Tensile Strength (PSI) 650 1200 585 Elongation % 700 600 685 Modulus @ 300% |(PSI) 260 585 300 Injection Moldable Yes Yes Yes OM Substrate PP PC, ABS, PC/ABS, COPE PP TECHNICAL PROPERTIES *UL listing does not apply; testing can be completed if required by the customer Copyright © 2021, Avient Corporation.

Building on the design concept from SurfCo, Avient conducted additional R&D work to formulate a specialty thermoplastic elastomer (TPE) that could be coextruded with polypropylene (PP) film and meet the high expectations of SurfCo and surfers everywhere. The customized TPE offered excellent hydrophobic qualities and similar melt strength to PP while still maintaining its key mechanical properties.

Did you know that with the right formulation, you can achieve properties that are as good or better than that of PA 6,6 using materials such as PA 6, PK, PBT/PET, PP, polymer blends and even post-industrial recycled blends? HOW ALTERNATIVE POLYMERS COMPARE TO PA 6,6 PA 6 | POSSIBLE APPLICATIONS: Automotive, Industrial, Consumer & Sporting Goods Wider processing temperature range Better surface quality Better weathering resistance Shorter conditioning time—nearly half that of PA 6,6 Lower temperature resistance Slightly lower chemical resistance Higher water absorption Lower stiffness/wear resistance PK | POSSIBLE APPLICATIONS: Automotive, Consumer & Sporting Goods, Industrial, Electrical & Electronics Lower CO2 emissions in production Better hydrolysis and chemical resistance Comparable dimensional stability Inherently lubricious for reduced wear and friction Easier to mold Cost competitive Lower short- and long-term thermal performance Harder to color More limited process window PBT/PET | POSSIBLE APPLICATIONS: Electrical & Electronics Lower water absorption Slightly higher rigidity/stiffness (for PBT) Better abrasion resistance Slightly better electric resistance Lower toughness properties Higher density Lower short- and long-term temperature resistance Lower hydrolysis resistance PP | POSSIBLE APPLICATIONS: Automotive, Consumer Goods, Lightweighting Applications Lower water absorption Slightly better chemical resistance Lower density Cost effective Fiber reinforced PP can achieve similar or better mechanical properties to PA 6,6 GF30 Reduced rigidity/stiffness Much lower abrasion resistance Lower electric resistance Reduced short- and long-term temperature resistance PC/PBT & PC/PET BLENDS | POSSIBLE APPLICATIONS: Automotive Interiors, Consumer Goods, Household Appliances Higher impact strength Good scratch resistance Good wear resistance Lower mechanical properties Higher brittleness Narrow processing temperature range PA 6,6/PET BLENDS | POSSIBLE APPLICATIONS: Automotive, Industrial, Appliance, Electrical & Electronics, Applications Where Low Water Absorption is Required Reduced water absorption—up to 40% Slightly higher mechanical properties in the conditioned state Slightly lower temperature resistance Slightly lower chemical resistance Narrow processing temperature range PA/PP BLENDS | POSSIBLE APPLICATIONS: Automotive Interiors, Electronics, Consumer & Sporting Goods Good adhesion to polyolefin-based TPEs Low permeability of water Good processability Lower density Lower temperature resistance Lower mechanical properties POST-INDUSTRIAL RECYCLED SOLUTIONS (PA 6,6/PA 6/PP) | POSSIBLE APPLICATIONS: Automotive Accessories, Industrial, Consumer & Sporting Goods Between 50-80% recycled content Good processability Cost effective Reduced chemical resistance Wider range of mechanical specifications Potential for slightly lower mechanical properties 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Hanna consolidate • Cultures clash – commodity wins • Dependent on income derived from commodity joint ventures The First 6 Years • Globally organized along three strategic platforms • Non-core equity investment dispositions • Talent upgrades, discipline instilled throughout organization • New CEO hired to transform POL into specialty business �18 of 20 officers new • Implemented four pillar strategy • Nearly 50% of The Second 6 Years History of PolyOne – A Transformation • Focused on increasing volume, not profits • Heavily tied to cyclical markets 2000 2006 2012 The FormationThe Formation The TransformationThe Transformation The New PolyOneThe New PolyOne organization • Demonstrated ability to deliver • Nearly 50% of business operating income derived from Specialty Platform* • Specialty assets acquired *Pro forma for ColorMatrix acquisition Page 8 30% 50% 70% 90% $10 $12 $14 $16 $18 PolyOnePolyOne Stock Price S&P 500 (relative performance) Strategy and Execution Drive Results | | | | -50% -30% -10% 10% 30% $0 $2 $4 $6 $8 $10 2006 2007 2008 2009 2010 2011 2012 Page 9 Four Pillar Strategy The World’s Premier Provider of Specialized Polymer Materials, Services & Solutions Page 10 60% 80% 100% % o f O p ra ti g I co m * Old PolyOne Transformation 2012 Target “What We Said” Mix Shift Highlights Specialty Transformation Ahead of Schedule *Operating Income excludes Corporate Charges ** Pro Forma for the acquisition of ColorMatrix and divestiture of SunBelt 2% 34% 42% 50% >50% 0% 20% 40% 2005 2008 2011 2011** 2012 % o f O p ra ti g I co m * JV's PP&S Distribution Specialty Specialty OI $5M $46M $89M $117M “What We Said” Page 11 2007 2012 Target 2011 “Where we were” “What we said” “Where we are” 1) Operating Income % Specialty 3.2% 10% - 12% 8.9% PP&S 6.1% 8% - 10% 7.2% Pro forma ColorMatrix Proof of Performance Distribution 3.0% 4% - 5% 5.6% 2) Specialty Platform sss% of Operating Income 20% >50% 50% 3) Specialty Vitality Index 21% 35% - 40% 49% 4) ROIC* (pre-tax) 11% >15% 16% 5) Sales outside the US 37% >40% 40% *ROIC is defined as TTM adjusted OI divided by the sum of average debt and equity over a 5 quarter period Page 12 2011 Pro forma ColorMatrix 2015 Target “Where we are” “Where we expect to be” 1) Operating Income % Specialty 8.9% PP&S 7.2% 12 – 16% 9 – 12% Elevating our Expectations and Yours PP&S 7.2% Distribution 5.6% 2) Specialty Platform % of Operating Income 50% 3) ROIC* (after-tax) 10% 4) Adjusted Annual EPS Growth 3 yr CAGR = 71% 9 – 12% 6 – 7.5% 65 – 75% 15% Double Digit Expansion *ROIC is defined as TTM adjusted OI divided by the sum of average debt and equity over a 5 quarter period Page 13 • Four pillar strategy, coupled with our ability to execute is driving results • Strong leadership team driving growth & executing • Innovation and services provide differentiation and How do we get there? EPS: $2.50 Assumptions • High single digit organic revenue CAGR • Operating margins in mid range of 2015 targets • Housing starts at 85% of 50 year norm by 2015 • No investment in incremental PP&S capacity • Completion of 2-3 midsize accretive acquisitions • No divestitures • Remain comfortably below 3X Net Debt / EBITDA • No global recession 2011 Rev: $2.9B Adj.

UV STABILIZER/COLOR COMBINATIONS • Combines color and UV stabilization for use in PP and PA • Ingredients screened with accelerated weather testing* • Excellent weather resistance properties (against chalking, embrittlement) • Long-term colorfastness and light stability UV STABILIZER/FLAME RETARDANT/ COLOR COMBINATIONS • Combines low halogen flame retardants, UV stabilizers and color for use in PP and PA • Ingredients screened with accelerated weather testing* • Excellent weather resistance properties (against chalking, embrittlement) • Compliant with local fire standards (e.g.: AFNOR M 2 in France, DIN 4102 B 2 – B 1 in Germany, UNI 8457 – 9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3-5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com STANDARD COLOR PORTFOLIO FOR INJECTION MOLDED PP SEATS Colors may vary from actual color shown.