Thermoplastic Elastomers How TPEs can help medical and pharmaceutical manufacturers meet growing global demand 2© 2020 Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 THE OPPORTUNITY: EFFICIENT ALTERNATIVES TO VULCANIZED RUBBER Is there a capacity crunch on the horizon? Also, energy and labor savings translate to lower power consumption and an improved utilization of staffing. 2.

所有产品均符 合OEKO-TEX® 100-2标准，不含增塑剂，且 VOC含量低于传统胶水。 ™ 产品公告 市场和应用 Versaflex TF TPE热熔胶解决方案专为以下应用 而设计: 主要特性 柔软舒适、回弹力强 与涤纶和尼龙织物紧密无缝粘合 通过OEKO-TEX 100-2测试 在高达60°C水温下具有出色的耐洗性 无毒配方，VOC含量低且不含增塑剂 是TPU胶膜和传统胶水的理想替代品 内衣弹性带 运动和健身服饰中的接缝带 1.844.4AVIENT www.avient.com 版权所有©2024 埃万特公司。

CHF) Ei Ae Lö Stammanteile Gesellschafter (siehe Personalangaben) Ei Lö Domiziladresse 1 30'804'000.00 2 21'563 x 1'000.00 9'241x 1'000.00 Colormatrix Holdings, lnc. (41 42456) PolyOne Europe Finance S.ä.r.1. I SHAB Arlesheim, 04.1 2.2O2O 07 :34 Fortsetzung auf der folgenden Seite Handelsregisteramt des Kantons Basel-Landschaft BASEL LANDSCHAFT Jlt cHE-112.279.714 Avient Switzerland GmbH Muttenz 2 Alle Eintragungen Ref TR-Nr TR-Datum SHAB SHAB-Dat.

IMPROVED BOTTLE QUALITY +2% in neck +3% in body -12% in base 8.5g 0.5L bottle, 60% rPET Polymer Weight Distribution Based on commercially produced water bottles, 51,000bph Mechanical Strength Based on PTI 14.4g 0.5L water bottles, Instron testing To p Lo ad (l bs ) Burst Pressure Based on 8.5g, 0.5L commercially produced water bottles Bu rs t P re ss ur e (B ar ) REDUCED CO2 EMISSIONS Based on a commercial process producing 8.5g 0.5L water bottles as 51,000bph 25% reduction in energy consumed during the bottle blowing process En er gy k W Reduce Energy Consumption SmartHeat RHC increases the heat-up rate for preforms, enabling energy reductions for the heating lamps used during the bottle blowing process. Translates to 25% CO2 reductions based on energy savings reducing CO2 emissions by 114 tonnes per year on one commercial blowing line CO 2 (t on ne s) SmartHeat RHC products are supplied in ColorMatrix™ approved packaging and are active as supplied.

Digimat for long fibre reinforced materials Advanced simulation captures part performance for fibre reinforced thermoplastics Comparing the results of isotropic material data to anisotropic material data Case study https://hexagon.com/ Figure 2: Digimat material model workflow when coupled with an FEA solver Manufacturing Intelligence hexagonmi.com2 Solution Avient leveraged Digimat to reverse-engineer material data based on the microstructure, tensile test data, and micro-mechanical modelling. All commonly-used finite element analysis (FEA) codes utilise Digimat material models via the workflow outlined in Figure 2.

Adjusted free cash flow for 2023 was $186 million, slightly ahead of expectations. 2 2024 Outlook “In the first quarter, we expect demand to continue to improve in our two largest end markets, packaging and consumer, as destocking comes to an end and our sustainable solutions portfolio expands. Three Months Ended December 31, 2023 2022 Reconciliation to Condensed Consolidated Statements of Income $ EPS(1) $ EPS(1) Net income (loss) from continuing operations attributable to Avient shareholders $ 27.8 $ 0.30 $ (17.0) $ (0.19) Special items, after tax (Attachment 3) 5.4 0.06 38.3 0.42 Amortization expense, after-tax 15.0 0.16 14.6 0.16 Adjusted net income / EPS $ 48.2 $ 0.52 $ 35.9 $ 0.39 (1) Per share amounts may not recalculate from figures presented herein due to rounding Year Ended December 31, 2023 2022 Reconciliation to Condensed Consolidated Statements of Income $ EPS(1) $ EPS(1) Net income from continuing operations attributable to Avient shareholders $ 75.8 $ 0.83 $ 82.8 $ 0.90 Special items, after tax (Attachment 3) 79.3 0.86 116.2 1.26 Amortization expense, after-tax 61.5 0.67 49.0 0.53 Adjusted net income / EPS $ 216.6 $ 2.36 $ 248.0 $ 2.69 (1) Per share amounts may not recalculate from figures presented herein due to rounding 7 Attachment 2 Avient Corporation Condensed Consolidated Statements of Income (Unaudited) (In millions, except per share data) Three Months Ended December 31, Year Ended December 31, 2023 2022 2023 2022 Sales $ 719.0 $ 790.4 $ 3,142.8 $ 3,396.9 Cost of sales 510.1 618.4 2,250.3 2,514.2 Gross margin 208.9 172.0 892.5 882.7 Selling and administrative expense 165.8 171.6 695.7 639.4 Operating income 43.1 0.4 196.8 243.3 Interest expense, net (26.8) (49.4) (115.3) (119.8) Other income (expense), net 4.3 (28.4) 5.8 (59.7) Income (loss) from continuing operations before income taxes 20.6 (77.4) 87.3 63.8 Income tax benefit (expense) 7.0 60.8 (11.0) 19.3 Net income (loss) from continuing operations 27.6 (16.6) 76.3 83.1 Income (loss) from discontinued operations, net of income taxes 0.8 561.5 (0.1) 620.3 Net income 28.4 544.9 76.2 703.4 Net loss (income) attributable to noncontrolling interests 0.2 (0.4) (0.5) (0.3) Net income attributable to Avient common shareholders $ 28.6 $ 544.5 $ 75.7 $ 703.1 Earnings (loss) per share attributable to Avient common shareholders - Basic: Continuing operations $ 0.30 $ (0.19) $ 0.83 $ 0.91 Discontinued operations 0.01 6.17 — 6.80 Total $ 0.31 $ 5.98 $ 0.83 $ 7.71 Earnings (loss) per share attributable to Avient common shareholders - Diluted: Continuing operations $ 0.30 $ (0.19) $ 0.83 $ 0.90 Discontinued operations 0.01 6.17 — 6.73 Total $ 0.31 $ 5.98 $ 0.83 $ 7.63 Cash dividends declared per share of common stock $ 0.2575 $ 0.2475 $ 1.0000 $ 0.9600 Weighted-average shares used to compute earnings per common share: Basic 91.2 91.0 91.1 91.2 Diluted 91.9 91.0 91.8 92.2 8 Attachment 3 Avient Corporation Summary of Special Items (Unaudited) (In millions, except per share data) Special items (1) Three Months Ended December 31, Year Ended December 31, 2023 2022 2023 2022 Cost of sales: Restructuring costs, including accelerated depreciation $ (2.0) $ (21.3) $ (11.9) $ (31.1) Environmental remediation costs (17.2) (0.4) (69.7) (24.2) Reimbursement of previously incurred environmental costs 1.6 — 1.6 8.3 Acquisition related costs — (23.8) — (34.1) Impact on cost of sales (17.6) (45.5) (80.0) (81.1) Selling and administrative expense: Restructuring and employee separation costs (1.1) (4.3) (14.9) (5.3) Legal and other (6.1) (4.0) (15.2) (3.0) Acquisition related costs (1.3) (6.1) (5.9) (19.3) Impact on selling and administrative expense (8.5) (14.4) (36.0) (27.6) Impact on operating income (26.1) (59.9) (116.0) (108.7) Interest expense, net - financing costs (0.1) (16.0) (2.3) (26.0) Mark-to-market on derivatives — — — (30.9) Pension and post retirement mark-to-market adjustment and other 3.8 (28.4) 3.7 (28.4) Impact on other income (expense), net 3.8 (28.4) 3.7 (59.3) Impact on income from continuing operations before income taxes (22.4) (104.3) (114.6) (194.0) Income tax benefit on above special items 4.5 26.8 27.7 49.4 Tax adjustments(2) 12.5 39.2 7.6 28.4 Impact of special items on net income from continuing operations $ (5.4) $ (38.3) $ (79.3) $ (116.2) Diluted earnings per common share impact $ (0.06) $ (0.42) $ (0.86) $ (1.26) Weighted average shares used to compute adjusted earnings per share: Diluted 91.9 91.7 91.8 92.2 (1) Special items include charges related to specific strategic initiatives or financial restructuring such as: consolidation of operations; debt extinguishment costs; costs incurred directly in relation to acquisitions or divestitures; employee separation costs resulting from personnel reduction programs, plant realignment costs, executive separation agreements; asset impairments; settlement gains or losses and mark-to- market adjustments associated with gains and losses on pension and other post-retirement benefit plans; environmental remediation costs, fines, penalties and related insurance recoveries related to facilities no longer owned or closed in prior years; gains and losses on the divestiture of operating businesses, gains and losses on facility or property sales or disposals; results of litigation, fines or penalties, where such litigation (or action relating to the fines or penalties) arose prior to the commencement of the performance period; one-time, non- recurring items; and the effect of changes in accounting principles or other such laws or provisions affecting reported results 2) Tax adjustments include the net tax impact from non-recurring income tax items, adjustments to uncertain tax position reserves and the establishment, reversal or changes to valuation allowances. 9 Special items (1) Three Months Ended March 31, 2023 Cost of sales: Restructuring costs, including accelerated depreciation $ (6.6) Environmental remediation costs (1.4) Impact on cost of sales (8.0) Selling and administrative expense: Restructuring and employee separation costs (11.3) Legal and other (4.4) Acquisition related costs (3.4) Impact on selling and administrative expense (19.1) Impact on operating income (27.1) Other loss (0.2) Impact on income from continuing operations before income taxes (27.3) Income tax expense on above special items 6.9 Tax adjustments(2) (1.9) Impact of special items on net income from continuing operations $ (22.3) Diluted earnings per common share impact $ (0.24) Weighted average shares used to compute adjusted earnings per share: Diluted 91.8 (1) Special items include charges related to specific strategic initiatives or financial restructuring such as: consolidation of operations; debt extinguishment costs; costs incurred directly in relation to acquisitions or divestitures; employee separation costs resulting from personnel reduction programs, plant realignment costs, executive separation agreements; asset impairments; settlement gains or losses and mark-to- market adjustments associated with gains and losses on pension and other post-retirement benefit plans; environmental remediation costs, fines, penalties and related insurance recoveries related to facilities no longer owned or closed in prior years; gains and losses on the divestiture of operating businesses, gains and losses on facility or property sales or disposals; results of litigation, fines or penalties, where such litigation (or action relating to the fines or penalties) arose prior to the commencement of the performance period; one-time, non- recurring items; and the effect of changes in accounting principles or other such laws or provisions affecting reported results

NIIF Plenas UBICACIÓN Dirección del domicilio principal: Aut Medellin Km 2.5 Via Parcelas 1 Km Municipio: Cota (Cundinamarca) Correo electrónico: andres.perez@clariant.com Teléfono comercial 1: 8773300 Teléfono comercial 2: No reportó. La importación, producción, aplicación, distribución, comercialización, representación, exportación, y en general la intervención en cualquiera de las etapas del proceso económico de todo tipo de productos químicos; 2. Ejecutar las ordenes o disposiciones de la asamblea general de accionistas y de la junta directiva; 2.

Microsoft Word - Avient Announces First Quarter 2025 Results 1 NEWS RELEASE FOR IMMEDIATE RELEASE Avient Announces First Quarter 2025 Results • First quarter sales of $827 million, reflects 2% organic growth over the prior year quarter, excluding the impact of foreign exchange • First quarter GAAP EPS of ($0.22) compared to $0.54 in the prior year quarter • First quarter adjusted EPS of $0.76, in-line with guidance; growth of 4% over the prior year quarter, excluding an unfavorable impact of $0.03 from foreign exchange • 2025 full year adjusted EPS guidance range of $2.70 to $2.94, unchanged from prior guidance CLEVELAND – May 6, 2025 – Avient Corporation (NYSE: AVNT), an innovator of materials solutions, today announced its first quarter results for 2025. Khandpur. 2 “From a regional perspective, Asia and Latin America delivered strong results, growing organic sales 9% and 17%, respectively,” Dr. EMEA delivered a fourth consecutive quarter of growth, increasing organic sales by 2%.

TAB TESTING OF VARIOUS INSTALLATION METHODS BREAK PETG Skins with 1 in/25 mm 1.5 in/38 mm 2 in/51 mm 2400 lbs/1089 kg 2820 lbs/1279 kg 2748 lbs/1246 kg Hammerhead with 5 lb/ft3 (80 kg/m3) 665 lbs 302 kg Hammerhead with 7 lb/ft3 (115 kg/m3) 881 lbs 400 kg Hammerhead with 1084 lbs 492 kg 770 lbs 349 kg Glass/Epoxy with 1055 lbs 479 kg Glass/Polyester with Balsa Core 919 lbs 417 kg L-Bracket Installation BREAK PETG Skins with 2375 lbs 1077 kg 770 lbs 349 kg Glass/Polyester with Balsa Core 797 lbs 362 kg U-Channel Installation ITW Plexus MA420 adhesive was used in all tab testing installations except where noted. GL AS S/ EP OX Y TA B M AT ER IA L N O T AB BREAK Hammerhead with 5 lb/ft3 (80 kg/m3) 420 lbs 191 kg Hammerhead with 7 lb/ft3 (115 kg/m3) 2 in 370 lbs 168 kg Hammerhead with 8 lb/ft3 (135 kg/m3) 332 lbs 151 kg 984 lbs 446 kg Glass/Polyester with Balsa Core 1298 lbs 589 kg Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 501 lbs 227 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 839 lbs 381 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 1156 lbs 524 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - Crestomer 1152PA Adhesive NA 1530 lbs 694 kg Hammerhead with 8 lb/in3 (135 kg/m3) Core Density - Crestomer M1-30 Adhesive NA 1471 lbs 667 kg Mixed Conditions ADHESIVE DESCRIPTION ADHESIVE GRADE MANUFACTURER AVERAGE BOND STANDARD DEVIATION FAILURE MODE BEST ADHESION 2k Urethane 75421 LORD 2281 psi 15.73 MPa 184 psi 1.27 MPa Substrate Cohesive 2k Acrylic SA1-705 GRY1 ACRALOCK 2211 psi 15.24 MPa 78 psi 0.54 MPa Substrate 2k Acrylic Plexus MA420 ITW 2171 psi 14.97 MPa 262 psi 1.81 MPa Substrate 2k Acrylic SA10-05 Blk1 ACRALOCK 2102 psi 14.49 MPa 138 psi 0.95 MPa Substrate 2k Urethane 75451 LORD 2047 psi 14.11 MPa 68 psi 0.47 MPa Cohesive 2k Acrylic SA1-705 GRY 1:1 ACRALOCK 1966 psi 13.56 MPa 68 psi 0.47 MPa Substrate 2k Acrylic Scotch-Weld 8010 3M 1907 psi 13.15 MPa 61 psi 0.42 MPa Adhesive Cyanoacrylate Gorilla Glue Gorilla Glue 1885 psi 13.00 MPa 432 psi 2.98 MPa Cohesive 2k Acrylic Crestabond PP-04 Scott Bader 1873 psi 12.91 MPa 281 psi 1.94 MPa Substrate  2k Acrylic SA10-05 Blk 10:1 ACRALOCK 1779 psi 12.27 MPa 127 psi 0.88 MPa Cohesive 2k Urethane 75422 LORD 1716 psi 11.83 MPa 190 psi 1.31 MPa Cohesive Adhesive 2k Urethane 75452 LORD 1535 psi 10.58 MPa 98 psi 0.68 MPa Adhesive 2k Methacrylate PolyFuse Icon Containment 1610 psi 11.10 MPa 98 psi 0.68 MPa Adhesive INTERMEDIATE ADHESION 2k Acrylic FA10-05 Blk C010817 ACRALOCK 724 psi 4.99 MPa 58 psi 0.40 MPa Cohesive 2k Acrylic FA10-05 Blk1 ACRALOCK 722 psi 4.98 MPa 44 psi 0.30 MPa Cohesive 2k Epoxy Loctite Epoxy Instant Mix Loctite 508 psi 3.50 MPa 81 psi 0.56 MPa Adhesive 2k Epoxy Gorilla Epoxy Gorilla Glue 341 psi 2.35 MPa 198 psi 1.37 MPa Adhesive NOT RECOMMENDED  2k Epoxy Loctite Epoxy Marine Loctite 0 0 No bond ADHESIVE SELECTION Brand names of the adhesives are owned by the respective manufacturers. Reference to them does not indicate any affiliation with or endorsement by them. 1 surface sanded with 220 grit scuff prep 2 surface primed with 459T For more information on installation, adhesives, and fasteners for specific applications, please contact Avient.

Appearance Hardness Specific Food Contact UL 94 Suitable ASTM Shore ASTM (D792) Consumer Electronics Series Versaflex™ CE 3120-40 Natural 42A 0.92 - - PC, ABS, PC/ABS, COPE ✔ - Good compression set—ideal for device cases or electronic grips Versaflex™ CE 3120-65 Natural 66A 1.15 - HB PC, ABS, PC/ABS, COPE ✔ - Chemical and abrasion resistant; 4.69 cradle-to-gate PCF—ideal for device cases or electronic grips Versaflex™ CE 3140-65N Natural 65A 1.00 - - PC, ABS, PC/ABS, COPE ✔ - 5G transparent materials—ideal for device cases or gaskets Versaflex™ CE 3140-90N Natural 90A 1.01 - - PC, ABS, PC/ABS, COPE ✔ - 5G transparent materials—ideal for device cases or gaskets Versaflex™ CE 3620 Black/ Natural 65A 1.00 - HB PC, ABS, PC/ABS, COPE ✔ - Chemical and abrasion resistant, hydrolitically stable—ideal for electronic grips/gaskets or wearables Engineering Resin Overmolds Versaflex™ OM 1060X-1 Natural 60A 0.93 ✔ - PC, ABS, PC/ABS ✔ - Versatile OM resin—ideal for grips/gaskets Versaflex™ OM 9-801N Natural 47A 1.04 ✔ HB PC, ABS, PC/ABS, PPO, POM, COPE, PMMA, HIPS ✔ - Soft touch/rubber feel—ideal for grips/gaskets Versaflex™ OM 9-802CL Clear 40A 0.92 ✔ - PC, ABS, PC/ABS, COPE ✔ - Soft touch/rubber feel—ideal for grips/gaskets Versaflex™ OM 6059-9 Black 58A 1.10 - HB PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, Versaflex™ OM 6160-1 Black/ Natural 60A 1.11 ✔ HB PA 6 and 6,6 ✔ Superior adhesion—ideal for grips, Versaflex™ OM 6240-1 Natural 43A 1.09 - - PA 6 and 6,6 ✔ - Superior adhesion — ideal for grips, Versaflex™ OM 6258-1 Natural 62A 1.09 - - PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, Versaflex™ OM 6258-9 Black 62A 1.09 - HB PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, Versaflex™ OM 6275-9 Black 75A 1.10 - - PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, Versollan™ OM1255NX Black 59A 1.05 - HB PC, ABS, PC/ABS, PC/PBT, COPE ✔ - Superior adhesion—ideal for power tool grips Versollan™ RU 2205-1 Natural 65A 1.16 - HB PC, ABS, PC/ABS, COPE ✔ ✔ High performance, rubber feel Appearance Hardness Specific Food Contact UL 94 Suitable ASTM Shore ASTM (D792) Special Series Versaflex™ VDT 4202-40B Black 40A 1.00 - - PP ✔ ✔ Vibration dispersion—ideal for washer/dryer feet or shin guards Versaflex™ G2800-17 Pink 18 OO 0.85 - - - ✔ - Skin-like feel—ideal for adult toys Versaflex™ SP 2820-55N Natural 55A 0.91 ✔ - - ✔ ✔ Superior puncture and tear resistance—ideal for dog toys Versaflex™ XP 2850 Natural 55A 0.88 ✔ - - ✔ ✔ Wet grip—ideal for water sports or grips Versaflex™ GP 2810-40N AM US Translucent 45A 0.87 ✔ - - ✔ - Antimicrobial Versaflex™ CE 3120-65 AM Natural 67A 1.15 - - PC, ABS, PC/ABS, COPE ✔ - Antimicrobial for consumer electronics Versalloy™ XL 9045-1 Natural 44A 0.88 ✔ - - ✔ - Excellent flow for long, thin flow paths— Versalloy™ XL 9055-1 Natural 53A 0.89 ✔ - PP ✔ - Excellent flow for long, thin flow paths— Versalloy™ XL 9055X-9 Black 53A 0.89 ✔ HB PP ✔ - Excellent flow for long, thin flow paths— Versalloy™ XL 9070-1 Natural 70A 0.89 ✔ - PP ✔ - Excellent flow for long, thin flow paths— Versalloy™ XL 9070X-9 Black 70A 0.89 ✔ HB PP ✔ - Excellent flow for long, thin flow paths; 2.54 cradle-to-gate PCF—ideal for grips or thin wall parts Dynaflex™ G7702-9001-02 Black 37A 1.10 - - PP ✔ ✔ High temperature performance—ideal for seals and gaskets Dynalloy™ DT 7910W White 45A 0.93 ✔ - - ✔ ✔ Low compression—ideal for dairy tubing Versaflex™ CL 2000X Clear 3A 0.87 ✔ - - ✔ ✔ Ultra soft Versaflex™ CL 2003X Clear 33 OO 0.87 ✔ - - ✔ ✔ Gel feel Versaflex™ CL30 Clear 30A 0.89 ✔ - PP ✔ ✔ High clarity, high tackiness Versaflex™ CL40 Clear 43A 0.89 ✔ HB - ✔ ✔ High clarity, high tackiness General Purpose Series Versaflex™ GP 2810 Translucent 20A–60A 0.88 ✔ - - ✔ ✔ Unfilled Versaflex™ GP 2810 Translucent 70A–90A 0.89 ✔ HB - ✔ ✔ Unfilled Dynaflex™ G7920 Natural/Black 20A 1.01 ✔ - PP ✔ ✔ Filled Dynaflex™ G7900 Natural/Black 30A–90A 1.05–1.20 ✔ HB PP ✔ ✔ Filled Appearance Hardness Specific Compression Set @ 23°C Compression Set @ 100°C Food Contact ISO 10993 USP VI UL 94 Suitable ASTM Shore A (D792) ASTM % ASTM % Tubing Versaflex™ G2705 N Translucent 60 0.89 20 - ✔ ✔ ✔ ✔ PP ✔ ✔ High resiliance, low compression set, and good puncture sealing–ideal for medical and biopharma tubing Versaflex™ HC BT218 Translucent 67 0.89 19 69 - ✔ ✔ ✔ - - ✔ Weldable and kink resistant—ideal for biopharma tubing Versalfex™ HC BIO BT218 Translucent 70 0.88 18 58 - ✔ ✔ - - - ✔ Weldable and kink resistant; 40% bio-derived content (Gen 1 biomass)—ideal for biopharma tubing Versaflex™ HC MT317 Translucent 68 0.89 17 69 - ✔ ✔ ✔ - - ✔ Flexible and kink resistant, high service temperature —ideal for medical and biopharma tubing Versalloy™ HC 9220-70 Natural 70 0.95 17 51 - ✔ ✔ - PP ✔ ✔ High temperature resistance—ideal for peristaltic pump tubing Syringe Components Versaflex™ HC 2110-35N Natural 35 0.89 19 47 - ✔ ✔ - LDPE, PP ✔ - Good puncture sealing and elevated temperature performance—ideal for septums Versaflex™ HC 2110-57B Black 57 1.01 20 37 - ✔ ✔ - - ✔ - Low coefficient of friction and elevated temperature performance—ideal for plungers and stoppers Engineering Resin Overmolds Versaflex™ OM 1040X-1 Translucent 42 0.92 22 - ✔ ✔ ✔ - PC, ABS, PC/ABS ✔ - Good compression set at room temperature— ideal for seals and grips Versaflex™ OM 3060-1 Clear 59 0.90 33 - ✔ ✔ ✔ HB PC, ABS, PC/ABS, PC/PETG, PC/PBT ✔ - Good compression set at room temperature and UV stability—ideal for seals and grips Versaflex™ OM 8940X-1 Clear 40 0.92 20 - ✔ ✔ - - PK, COPE, PC, ABS, PC/ABS ✔ - Excellent chemical resistance to alcohols and disenfectants—ideal for grips on medical devices Versaflex™ OM 4052 Translucent 56 1.01 27 - ✔ - - - PC, ABS, PC/ABS ✔ - Excellent chemical resistance to skin oils, like sebum, and hand lotion—ideal for consumer healthcare applications Versaflex™ OM 4063 Translucent 64 1.12 30 - ✔ - - PC, ABS, PC/ABS ✔ - Excellent chemical resistance to skin oils, like sebum, and hand lotion—ideal for consumer healthcare applications General Purpose Applications Versaflex™ CL E85 Clear 85 0.90 20 72 ✔ ✔ ✔ - - - ✔ High clarity without plasticizers—ideal for extrusion Versaflex™ HC 3810 Series Translucent 20–90 0.88 16 54 - ✔ - - - ✔ - Formulated without animal derivatives, excellent colorability—ideal for seals and labware Versaflex™ G2705 N Translucent 60 0.89 20 - ✔ ✔ ✔ - PP ✔ ✔ High resiliance, low compression set, and good puncture sealing Versalloy™ HC 9220-70 Natural 70 0.95 17 51 - ✔ - - PP ✔ ✔ High temperature resistance Versalloy™ HC 9210 Series Natural 55 & 70 0.89 20 44 - - ✔ - - ✔ - Formulated without animal derivatives— ideal for injection molding long thin flow paths, smooth surface aesthetics Versaflex™ CL2242 Clear 43 0.89 23 - ✔ ✔ ✔ - - ✔ - High clarity maintained after boiling cleaning processes Versaflex™ CL2250 Clear 50 0.89 20 - ✔ ✔ ✔ - - ✔ - High clarity maintained after boiling cleaning processes FEATURED TPES FOR HEALTHCARE APPLICATIONS H EALTH CARE GENERAL PROPERTIES REGULATORY BONDING PROCESS FEATURES Appearance Hardness Specific Gravity Weatherability* VOC FOG Odor** UL 94 Suitable ASTM Shore A Internal QUV 1000hrs (Delta E) VDA 278 μg/g (ppm) VDA 278 μg/g (ppm) Recycled Content Series reSound™ REC OF 7310-80 Black/ Natural (Gray) 80 0.90 0.35 75 379 3 (VDA 270) - PP ✔ 35% PCR/PIR content (food packaging)— ideal for automotive interior applications reSound™ REC OF 7310-90 Black/ Natural (Gray) 90 0.91 0.11 160 557 3 (VDA 270) - PP ✔ 45% PCR/PIR content (food packaging)— ideal for automotive interior applications General Purpose Series OnFlex™ G7705 B Black 42 1.20 - - - - - PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7705 N Natural 44 1.18 - - - - - PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7720 B Black 57 1.16 0.55 - - - HB PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7720 N Natural 55 1.17 3.72 - - - HB PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7820 N Natural 92 1.14 - - - - - PP ✔ ✔ Easy processing for a wide variety of applications Automotive Fasteners & Interior Components OnFlex™ AF 7210 Series Natural 40–90 1.00 - - - - - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 40 1.00 0.49 113 845 2 (SAE J1351, OnFlex™ AF 7210 Black 50 1.00 0.42 51 762 2 (SAE J1351, OnFlex™ AF 7210 Black 60 1.00 0.21 112 1740 1 (SAE J1351, OnFlex™ AF 7210 Black 70 0.99 0.22 105 1976 3 (SAE J1351, OnFlex™ AF 7210 Black 80 1.00 0.32 74 4459 3 (SAE J1351, OnFlex™ AF 7210 Black 90 1.00 - - - - - PP ✔ - Low odor and good UV resistance HVAC & Interior Components OnFlex™ LO 7120-45N Natural 45 1.15 3.21 41 521 2 (SAE J1351, Dry) - PP ✔ - Significant reductions in VOCs and fogging compared to traditional TPE technologies GLS™ TPEs with Antimicrobial Technologies OnFlex™ LO 7120-45B AM Black 45 1.13 0.52 - - - - PP ✔ - Imbedded antimicrobial technology FEATURED TPES FOR TRANSPORTATION APPLICATIONS TRANSPO RTATIO N * Values were taken on 3mm plaques following 1000hrs of continious exposure to UVA-340 ** Samples were conditioned at 23C at 35% RH for 24 hrs.