Molded parts can shrink after they come out of the mold as the polymer cools. The best gates, or openings, for molten plastic to enter the mold are hot runner molds, full-round runners, or modified trapezoid runners. Proper positioning of the gate, or mold opening, and proper mold design can minimize flaws.

SKZ Standart-Dokumentvorlage This certificate is valid from: 23.05.2024 bis: 19.05.2027 Certificate No.: 000870.E/24.R Würzburg, 23.05.2024 Benjamin Kirchgeßner Certification Body Certificate The SKZ - Cert GmbH certifies to the company Avient Th. This certificate is valid from: 23.05.2024 bis: 19.05.2027 Certificate No.: 000870.E/24.R Würzburg, 23.05.2024 Benjamin Kirchgeßner Certification Body Appendix to certification number: 000870.E/24.R Avient Th.

GLS™ TPEs - Injection Molding Guide Guide to overmolding material selection, part and mold design, material handling and preparation, TPE injection molding, processing, maximizing adhesion and troubleshooting for GLS™ TPEs TPEs for Molded Case Circuit Breaker Phase Barrier

Available in a number of different carriers ranging from polyolefins and styrenics to engineering resins: injection molding, blow molding, film and sheet extrusion, PET sheets and bottles, polyolefin films. Learn how molded-in color can offer the same eye-popping effects of paint at a greater efficiency and lower cost

The addition of Cesa™ Release Additives to polymers during processing helps to prevent parts from sticking to the mold cavity, facilitating their removal which can lead to reduced cycle times and increased productivity. Prevents parts from sticking to the mold cavity Reusable concentrates significantly reduce time spent cleaning extrusion and injection molding equipment.

HVAC doors are typically produced by injection molding two parts that provide structural strength and air sealing performance. In addition to the lighter weight requirement, the material needed to resist warpage after molding, a common issue for thin walled plastic parts. This formulation provided both the processability required for extremely short cycle injection-compression molding, as well as including an additive to stabilize the material when in contact with copper.

Antimicrobial additives work to resist, inhibit and prevent the growth of microbes including bacteria and mold. Because the toothbrushes were molded in both clear and opaque resins, the team had to explore two different avenues—one that preserved clarity and one that retained opacity. Coupled with their ability to be used across a variety of different resins, These antimicrobial additives provided significant value while protecting against microbial degradation, mold and mildew.

Hydrocerol improved productivity up to 20% due to lower cycle times and processability on different injection molding units. Using Hydrocerol with core-back molding technology, a process in which the mold is opened slightly to further reduce pressure and allow the foam core to expand, Avient helped the customer leverage density reduction to lower finished part weight.

Antimicrobial additives work to resist, inhibit and prevent the growth of microbes including bacteria and mold. Because the toothbrushes were molded in both clear and opaque resins, the team had to explore two different avenues—one that preserved clarity and one that retained opacity. Coupled with their ability to be used across a variety of different resins, These antimicrobial additives provided significant value while protecting against microbial degradation, mold and mildew.

HVAC doors are typically produced by injection molding two parts that provide structural strength and air sealing performance. In addition to the lighter weight requirement, the material needed to resist warpage after molding, a common issue for thin walled plastic parts. This formulation provided both the processability required for extremely short cycle injection-compression molding, as well as including an additive to stabilize the material when in contact with copper.