Technical Data Sheets Safety Data Sheets Safety Data Sheets

Technical Data Sheets Safety Data Sheets Safety Data Sheets

Technical Data Sheets Safety Data Sheets Safety Data Sheets

Technical Data Sheets Safety Data Sheets Safety Data Sheets

Technical Data Sheets Safety Data Sheets Safety Data Sheets

Technical Data Sheets Safety Data Sheets Safety Data Sheets

This paper introduces novel developments in themoplastic elastomers which have the uniqueness of universally bonding to non-polar substrates such as polypropylene at the same time exhibiting outstanding bonding characteristics to various polar substrates. 2 INTRODUCTION A hard/ soft combination of TPEs and rigid thermoplastics provides differentiations of a product in various applications (1). Rigid thermoplastics include both commodity thermoplastics and engineering thermoplastics, such as polypropylene (PP), polystyrene (PS), high impact polystyrene (HIPS), polycarbonate (PC), acrynitrile-butadiene-styrene (ABS), poly(ethylene terephthalate) (PET), poly(methylmethacrylate) (PMMA), styrene acrylonitrile (SAN), poly(phenylene oxide) (PPO), polyamide (PA), PC/ABS blend and PPO/PS blend etc.. Figure 1 Surface energy of various thermoplastic elastomers with rigid thermoplastics Figure 2 Schematic diagram of the peel test Engineering Plastics Polyamide 6,6 ABS Polycarbonate Acrylic Polystyrene Polypropylene Polyethylene Elastomers COPA TPU COPE S-TPE TPV mPE Surface Energy (mN/m) 46 43 40 37 34 31 28 5 Table 1.

INDUSTRY BULLETIN STANDARD UNITS ONFLEX LO 7120-45N Volatile Organic Compounds VDA 278 ug/g(ppm) 41 Fogging VDA 278 ug/g(ppm) 521 Odor • Control • Dry conditions • Wet conditions SAE J1351 (15) 1-10 Scale 1 2 1 Compression Set (23°C) • 22 hours • 70 hours ASTM D395 % 14.4 14.6 Capillary Viscosity • 1341/s • 11170/s ASTM D3835 Pa*s 35 7 HVAC SYSTEMS OnFlex™ LO • Features: low VOC/FOG, low odor, good compression set, easy processing, overmolds to polypropylene • Example applications: seals and flaps in heating, ventilation and air conditioning systems CHARACTERISTICS ONFLEX™ LO ONFLEX™ AF TPE GENERAL PURPOSE TPV TPO Volatile Organic Compounds (VDA 278) Very Low Moderate Moderate Moderate Very Low Fogging (VDA 278 & DIN 75201) Very Low Moderate Moderate High Very Low Odor (VDA 270 Requirement ≤3.0) ≤3.0 ≤3.0 >3 >3 ≤3.0 Gloss Level Low Low Low Very Low High Tactile Feel Grippy Grippy Grippy Grippy Waxy Pre-Drying Required No No No Yes No Raw Material Costs $$ $$ $$ $$$ $ Compression Set @ RT Good Good Good Excellent N/A Compression Set @ ≥70°C Moderate Moderate Moderate Good N/A UV Resistance Good Excellent Good Good Good Weatherability Good Excellent Good Good Good Hardness Range Low to High Low to High Low to High Low to High High Density (g/ml) 1.15 0.99 0.90–1.20 0.95–0.98 0.90–1.20 GENERAL CHARACTERISTICS COMPARING TPE, TPV, TPO Grades shown on both pages are representative of solutions manufactured in North America, more grades available globally. INTERIORS/EXTERIORS TEMP STANDARD UNITS ONFLEX AF 7210-40B ONFLEX AF 7210-50B ONFLEX AF 7210-60B ONFLEX AF 7210-70B ONFLEX AF 7210-80B QUV Exposure • 1000 Hrs(0.68 W/m2 @ 340nm) • 2000 Hrs(0.68 W/m2 @ 340nm) 45°C ΔE 0.49 0.38 0.42 0.48 0.21 0.85 0.22 0.14 0.32 0.24 Xenon-Arc Exposure • 1000 Hrs(0.35 W/m2 @ 340nm) 63°C ΔE 0.63 0.84 0.34 — 0.58 Capillary Viscosity • 1341/s • 11170/s ASTM D3835 Pa*s 60 11.4 79 15 65 13 48 13.7 73 16 Ozone Resistance ASTM D1149(16) B Visual No cracks No cracks No cracks No cracks No cracks Low Temperature Brittleness ISO 812 B °C -63 -62 -62 -62 -62 OnFlex™ AF • Features: long-term sealing performance, reduced noise and vibration, grippy feel, low gloss, low odor, excellent UV resistance and weatherability, easy processability, overmolds to polypropylene • Example applications: trays, door pockets, fasteners, clips, roof rack pads, roof and door trim, and window encapsulations The need to innovate is virtually endless.

We must make changes to our Material Safety Data Sheets (MSDSs), soon to be called Safety Data Sheets (SDSs) under the new GHS format. Q8: What changes can be expected on PolyOne’s Safety Data Sheets? PolyOne FAQs for the Globally Harmonized System (GHS) Safety Data Sheets (SDS) and Product Labeling.

as applicable) 4.2.2 Customer Description 4.2.3 Manufacturer’s Product Code 4.2.4 Manufacturer's Lot Number 4.2.5 Quantity and Units (Example 25 lbs.) 4.2.6 Company Name 4.2.7 Date of Manufacture 4.2.8 Expiration Date (as applicable) 5.0 SUPPORTING DOCUMENTATION 5.1 Certification: Each shipment of product will be accompanied by a Certification that, at the time of shipment, the material conforms to the Product Specifications. 5.1.1 Certification document will include: 5.1.1.1 Customer Part Number 5.1.1.2 Customer Purchase Order Number 5.1.1.3 Customer Material Description 5.1.1.4 Manufacturer's Lot Number 5.1.1.5 Total quantity shipped (with units) 5.1.1.6 Test values (as applicable) 5.1.2 Certification will be sent with each product shipment, addressed to the Customer’s shipping location and/or electronically sent to appropriate Customer contact. 5.1.3 The Certification document may contain test values conducted by NEU on the product for those characteristics listed under certification. 5.2 Safety Data Sheets: A Safety Data Sheet will be made available upon request or may be available on NEU’s website. The SDS is supplied to the shipping location from where the product is ordered. 5.3 Technical Data Sheets: A Technical Data Sheet will be made available on NEU proprietary technologies upon request. 5.4 Sales Order Confirmation: A documented response confirming acceptance of a Customer purchase order.