June 30 June 30 June 30

PP NONWOVEN MANUFACTURER G E O T E X T I L E S • High concentrate UV solution (up to 50% light protection) in PP nonwoven textiles • Shorter lead time from existing supplier • Local technical support • Long-lasting UV stability • Provided high concentrate UV protection in nonwoven textiles with dosage @ 50% • Shortened the lead time with global supply and technical service • Offered excellent UV stability CesaTM Light Additives KEY REQUIREMENTS WHY AVIENT? https://www.avient.com/products/polymer-additives/uv-and-light-blocking-additives/cesa-light-additives Slide 1: PP NONWOVEN MANUFACTURER

10009PFXHDC Epic HD Clear 2 - 30 parts Epic SFX Bases:  Mix by weight Sculpture Base 50%, Plush Base 30%, Cork Base 20%. 

Barrel Temperatures °F (°C) PP Mineral-Filled PP Glass-Filled PP HDPE LDPE Rear Zone 360–390 (182–200) 400–420 (204–216) 400–420 (204–216) 370–390 (188–199) Center Zone 370–400 (188–204) 410–430 (210–221) 425–445 (218–229) 410–430 (210–221) 380–400 (193–204) Front Zone 390–410 (200–210) 420–440 (216–227) 435–455 (224–235) 420–440 (216–227) 390–410 (199–210) Nozzle 400–425 400–425 Melt Temperature 400–425 400 - 425 Mold Temperature °F (°C) 60–120 (16–49) Pack & Hold Pressure 50–75% of injection pressure Injection Velocity (in/s) 1.0–3.0 Back Pressure (psi) 50–100 Screw Speed (rpm) 30–100 Drying Parameters Hours @ °F (°C) Not typically required. Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

September 30 September 30 September 30

该产品组合为PE基料，但可根据要求 提供PP基料。 埃万特还针对容器/瓶子提供REMAFIN™ EP白色预着色配方和浓缩物， 以低密度和高密度PE和PP树脂形式供应。 在不限制本声明的一般性的情况下，不得将埃万特的产品用于旨在用于以下目的的任何医疗器械应用： (1) 接触人体组织或体液长达30天或更长时间； (2)“整形”（整容或重建）手术； (3) 生殖植入物或任何节育器械；或者 (4) 用于支持或维持人类生命的永久性（超过30天）植入式医疗器械中的任何关键组件。

PP is compatible with midblock of SEBS. Figure 1 shows the TEM of two of SEBS/oil/PP compound (1). The PVC has a more than 30 percentage higher specific gravity than SBC compound.

XRU-2307 FEP101 30% GLASS BEADS XRU-2308 PFA 201SH 30% GLASS BEADS PP BLUE ORI

June 30, June 30, June 30,

Sep 16, 2009 9:30 AM EDT