关键性能 加工信息 1 1 物理性能 标称值 标称值 单位 测试法 1.00 ASTM D792 20 g/10 min ASTM D1238 抗拉强度 密度/比重 熔指 (MFR) (230°C/2.16kg) 15.0 MPa ASTM D638 1400 MPa ASTM D790 35.0 MPa ASTM D790 150 J/m ASTM D256 < 100000 ohms/sq ASTM D257 80 to 90 °C 4.0 to 6.0 hr 220 to 250 °C 30 to 80 °C 机械 弯曲模量 弯曲强度 悬臂梁缺口冲击强度（注塑样条） 冲击 电气 表面电阻率 干燥温度 注塑 干燥时间 加工（熔化）温度 模具温度 主要性能：不能被解释为技术指标 单位 Trilliant HC™ 方案如何协助攻克严苛的性能和工艺挑战 www.avient.com 版权所有©2022 埃万特公司。

The barrel temperature of the injection molding machine was set from 180°C to 220°C (360°F to 430°F) and the injection velocity from 0.7 inch/sec to 2.0 inch/sec. Figure 1 Surface energy of various thermoplastic elastomers with rigid thermoplastics Engineering Plastics Polyamide 6,6 ABS Polycarbonate Acrylic Polystyrene Polypropylene Polyethylene Elastomers COPA TPU COPE S-TPE TPV mPE Surface Energy (mN/m) 46 43 40 37 34 31 28 Figure 2 Schematic diagram of the peel test Table I Physical property of TPE-1 Shore A Hardness (10 second delay) 44 Specific Gravity (g/cm3) 0.90 Color Natural 300 % Modulus (PSI) 348 Tensile Strength (PSI) 603 Elongation at Break (%) 598 Tear Strength (lbf/in) 110 Table II Adhesion value of TPE-1 on different substrates Substrate Average Peel Strength (lbf) Failure Type PP 17 Cohesive Copolyester 13 Adhesive PET 13 Adhesive PPE/HIPS 18 Adhesive PMMA 15 Adhesive PS 18 Adhesive PC 17 Adhesive PC/ABS 14 Adhesive HIPS 13 Adhesive ABS 13 Adhesive Table III Properties and peel strength of TPE-2 materials 15.37Nylon 11.16.5POM 227Polyester 22.619PC/ABS 24.5-ABS 20.828PP Peel Strength (PIL) 713721Tensile Elongation (%): 10811010Tensile Strength (psi): 5651Hardness: BA 15.37Nylon 11.16.5POM 227Polyester 22.619PC/ABS 24.5-ABS 20.828PP Peel Strength (PIL) 713721Tensile Elongation (%): 10811010Tensile Strength (psi): 5651Hardness: BA Figure 3 Capillary viscosity of TPE-1 and -2 at 200°C 1.00E+00 1.00E+01 1.00E+02 1.00E+03 1.00E+01 1.00E+02 1.00E+03 1.00E+04 1.00E+05 Shear rate (1/sec) Vi sc os ity (P a* se c) TPE-1 TPE-2A TPE-2B GLS Corporation Abstract Introduction Experimental Material Two classes of “universal overmolding TPEs” have been developed and used in this study.

se sídlem Pobřežní 620/3, 186 00 Praha, IČO 26689537, zapsanou v obchodním rejstříku vedeném u Městského soudu v Praze pod spisovou značkou č. C 87503, IQAP Czech s.r.o., se sídlem Průmyslová 451, 391 02 Planá nad Lužnicí, Česká republika, zapsanou v obchodním rejstříku vedeném u Krajského soudu v Českých Budějovicích pod spisovou značkou č. C 13832 a Avient S.à r.l., jednající skrze svou pobočku Avient S.à r.l.

ACTIVE INGREDIENTS RESISTANCE RATING Clorox® Disinfecting Wipes 5813-79 Quaternary ammonium +++++ +++++ +++++ ++ +++ ++++ Formula 409® Heavy Duty Degreaser N/A Lauramine oxide, ethanolamine +++++ +++++ +++++ + ++ +++ Lysol® All-Purpose Cleaner 777-66 Quaternary ammonium +++++ +++++ +++++ + + ++ $$$ $$$ $$$$ $ $$$ $ MATERIAL COMPARISON WITH COMMON CONSUMER DISINFECTANTS P AB S P PE T P PB T E 90 0 CR E 90 0 H I C R E 92 0 C RCRITERIA FOR RESISTANCE RATING + strength and elongation at yield retention between 90-110% + strength and elongation at yield retention between 75-125% + no statistically significant reduction in elongation at break (p < 0.05) + visual observation score of 4 or better (minor/no crazing, no cracks) + samples survived disinfectant exposure in strain jig Lysol® is a trademark of Reckitt Benckiser LLC Formula 409® is a trademark of The Clorox Company Clorox® is a trademark of The Clorox Company An independent, A2LA-accredited lab tested the following polymers with various disinfectants to help customers choose the material suitable for their specific application requirements.

KEY CHARACTERISTICS • Resistant to heat, oil, creep and abrasion • Flame performance • Low temperature performance • Temperature ratings up to 125°C • High extrusion speeds, ambient curing properties and low capital investment • Conforms to UL-44, UL-4703 and CSA 22.2 requirements MARKETS AND APPLICATIONS Syncure XLPE formulations provide economical solutions for multiple end-use commercial and residential applications. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com TEST STANDARD UNIT SYNCURE™ XLPE S1054A ROHS NATURAL Specific Gravity ASTM D1505 – 0.919 Melt Flow Index, 190°C/2.16kg ASTM D1238 g/10min 1.045 Tensile Strength at Break ASTM D638 psi 2500 Tensile Elongation at Break ASTM D638 % 450 Delta Torque Internal g-m 2154 Moisture Content ASTM D2974 % 0.0004 Gel Content ASTM D2765 % 73 Hot Creep Elongation UL 2556 % 49 Hot Deformation UL 2556 % 6 TECHNICAL PROPERTIES *Gel Content, Hot Creep Elongation and Hot Deformation measured on 95 phr S1054A / 5 phr S100B system, and cured by autoclave for 9 hours

KEY CHARACTERISTICS • DBDPE-free • Excellent flame performance • Resistance to heat, oil, creep, and abrasion • Temperature rating up to 90°C • High extrusion speeds • UL 44 compliant Copyright © 2023, Avient Corporation. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com System Syncure XLPE S200FH Syncure XLPE S200FV Applications Building Wire, Tray Cable, Service Entrance Building Wire, Tray Cable, Service Entrance Specification UL 44 UL 44 Wire Type RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 Components 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Features Horizontal Flame, DBDPE-free VW-1, DBDPE-free General Properties Specific Gravity (g/cm3) 1.01 1.31 Hardness Shore D, 10sec 47 48 Gel % 68 70 Tensile Properties Tensile Strength (psi) 2800 3200 Elongation % 400 470 Tensile Retention % 95 100 Elongation Retention % 90 93 Electrical Dielectric Strength (V/mil) 1000 1200 Dielectric Constant 2.31 2.61 Dissipation Factor % 0.0012 0.0043 Thermal Temperature Rating °C 90 90 Heat Deformation % 10 5 TECHNICAL PROPERTIES

These robust materials also incorporate heat stabilization to maintain tensile strength and tensile elongation properties for long- term thermal aging up to 120°C. Edgetek™ ET9700-0031 HI HS NAT Edgetek™ ET9700-0033 20GF HI HS NAT Edgetek™ ET9700-0032 35GF HI HS NAT Description Unfilled GF 20% GF 35% Color Natural & Black Natural & Black Natural & Black Notched Impact (kJ/m2) 19.0 13.8 13 Un-Notched Impact (kJ/m2) No Break 73 87 HDT, 1.83 MPa (°C) 112 182 258 Tensile Strength, yield (MPa) 60 106 183 Tensile Elongation, yield (%) 6.0 3.5 2.2 Flexural Modulus (MPa) 2235 5288 9058 Flexural Strength (MPa) 96 170 264 Heat Stabilization Yes Yes Yes

They are developed to achieve GWFI 960°C ratings with a maximum of 30 seconds post combustion time. APPLICATIONS • Electrical and electronic enclosures and housings • Junction boxes • Switches, connectors and plugs • Power outlet components • Covers and windows in E&E parts BENEFITS • Formulated without PTFE which is typically used as anti-drip agent • Non-halogen in accordance with the IEC 61249-2-21 standard • Achieves GWFI 960°C temperature (with max. 30 sec post combustion time) according to IEC 60695-2-12 • Can be combined with colors and other additives for added convenience and increased performance PRODUCT OVERVIEW Copyright © 2023, Avient Corporation.

In trials with various washing machines and modes, they show excellent peel strength and resistance to discoloration, fading, or hazing at water temperatures up to 60°C. KEY CHARACTERISTICS • High-wearing comfort and elastic recovery • Strong and seamless adhesion to polyester and nylon fabrics • Passed OEKO-TEX 100-2 testing • Excellent washability at up to 60°C • Non-toxic formulations with low volatile organic compounds (VOC) and without added plasticizers • Attractive alternative to conventional TPU adhesive film and glue MARKETS & APPLICATIONS Versaflex TF Adhesive TPE solutions have been custom engineered for: • Elastic strips in underwear • Seam tapes in sports and fitness apparel PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Its portfolio of OnColor™ polymer colorants was developed to improve the heat and long-term color stability of cautionary orange polymers for high-voltage EV connectors, offering the following benefits: • Long-term fading resistance in thermal aging tests at up to 130°C for 1,000 hours, • No migration, excellent processing stability • Lower corrosion risk vs. typical comparable colorants • No impact on flame retardancy and limited adverse effects on essential mechanical characteristics, including flexural and impact strength Avient’s orange nylon colorants are available in several validated RAL, Pantone, and JPMA orange shades for compounding, injection molding, and extrusion. LONG-TERM HEAT AGING PERFORMANCE Heat-aging condition: 130°C, 1,000 hours in PA66/GF/FR compound 0 Hour Comparison of PA66/GF/NHRF typical and with OnColor™ AB23447398 500 Hours 1,000 Hours