Aquamix additives are fully compatible and easily compounded with base polymers.

Parameters NM5600-8002 RS NM5600-8004 RS Drying Temperature 100–120°C 100–130°C Drying Time 4–6 hours 4–6 hours Barrel Temperature °C °C Rear Zone 250–270 260–270 Central Zone 260–280 270–290 Front Zone 270–295 290–305 Nozzle 290–300 290–300 Mold Temperature 80–100 80–100 Screw Speed Moderate Moderate Back Pressure 3–10bar 3–10bar Cushion stroke 5–10% of plasticizing stroke 5–10% plasticizing of stroke Injection Speed Medium Medium Injection Pressure Medium–high Medium–high Holding Pressure 30–50% of injection pressure 20–40% of injection pressure Screw Type General purpose General purpose Screw L/D 20:1 20:1 Screw Compression Ratio 2.5:1 2.5:1 Non-return Check Valve Free flow check ring Free flow check ring Nozzle Type Reverse taper Reverse taper Barrel Capacity 30–80% of barrel should be used Processing Guide 2 Start Up & Shut Down Recommendations Purge Compound 1. 2–3 melt flow PP or purging compound.

Injection Molding Parameters Base Resin PPA PPS PA 6/6 PA 12 Barrel Temperatures °F (°C)* Rear Zone 550–580 (288–305) 550–580 (288–305) 440–490 (227–254) 440–480 (227–250) Center Zone 560–600 (293–316) 560–615 (293–324) 470–510 (243–266) 460–510 (238–266) Front Zone 580–620 (304–327) 590–630 (310–333) 490–540 (254–282) 480–520 (250–271) Nozzle 575–615 (302 –324) 600–625 (316–330) 520–570 (271–300) 500–530 (260–277) Melt Temperature °F (°C) 575–615 (302–324) 600–625 (316–330) 520–570 (271–300) 500–530 (260–277) Mold Temperature °F (°C) 250–300 (121–150) 250–300 (121–150) 150–200 (66–93) 150–200 (66–93) Pack and Hold Pressure 50–80% of Injection Pressure Injection Velocity 1.0–3.0 in/sec Back Pressure 25–100 psi Screw Speed 25–75 rpm Drying Parameters °F (°C) 6 hours @ 175 (80) 6 hours @ 300 (150) 3 hours @ 180 (82) 3 hours @ 180 (82) Cushion 0.125–0.250 in Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose Reverse Taper Reverse Taper Clamp Pressure 4–5 tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Processing Guide 3 Start Up & Shut Down Recommendations Purge Compound HDPE or HIPS Recycling Recycling Therma-Tech™ up to 20% is permissible.

This is to certify that the Quality Management System of: Avient Corporation - Avon Lake 33587 Walker Road Avon Lake, OH 44012 The Quality Management System is applicable to: Certificate No: 65799 Certification Date: 01 October 2020 Effective Date: 25 September 2023 Expiration Date: 30 September 2026 Revision Date: 26 September 2023 Dominic Townsend, President DESIGN AND MANUFACTURE OF COLOUR AND ADDITIVE CONCENTRATES, THERMOPLASTIC RESINS AND SPECIALTY COMPOUNDS This certificate may be found on the ABS QE Website (www.abs-qe.com). José Garibaldi 2401 Lomas de Zamora, Buenos Aires 1832 Argentina Activity: Management of QMS, Design and manufacture of colour and additive concentrates, thermoplastic resins and specialty compounds Activity: Administration, Site management, Manufacture, Laboratory (QC and Colormatching), Procurement, Maintenance, Infrastructure, Warehouse and Transport, Sales Page 3 of 10 Facility: Avient Colorants France S.A.S. 1995 route de la Vallée du Giffre Saint-Jeoire en Faucigny 74490 France Facility: Avient Colorants Germany GmbH Kornkamp 50 Ahrensburg, Thuringia 22926 Germany Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Facility: Avient Colorants Germany GmbH Hohenrhein 1 Lahnstein, Thuringia 56112 Germany Facility: Avient Guatemala S.A. 27 Avenida 34–11, Zona 12 Parque Global 1012 Guatemala Activity: Administration, Site management, Manufacture, Laboratory, Maintenance, Infrastructure, Warehouse and Transport Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Facility: Avient (Chile) SpA Camino a Melipilla 15170 Maipú, Región Metropolitana de Santiago 9250000 Chile Facility: Avient Colombia S.A.S.

The materials are compounded with fillers, flame- retardants, additives and stabilizers to provide a customized desired level of performance.

The Avient team worked carefully to develop a compound that could utilize existing tooling to avoid additional tooling costs.

Further, by moving to a paintless material, this customer was able to eliminate the volatile organic compounds (VOCs) produced during paint operations, thereby improving the environmental footprint of their production facility.

Using a variety of metallic fibers and particles, these compounds have densities similar to traditional metals, while offering design and processing flexibility because of the polymer matrix, which can be extruded, molded, calendered, or thermoformed into the final desired shape.

ES0165 NPT CLEAR FLOCKING COMPOUND

XRU-2460 FEP NP112 COMPOUND B/N FILLED