https://www.avient.com/sites/default/files/2021-06/edgetek-et8900-cr-processing-guide.pdf
Edgetek™
ET8900 CR SERIES
PROCESSING GUIDE
EDGETEK ET8900 CR THERMOPLASTICS
Injection Molding Parameters
The barrel temperatures below should be used only as a reference point.
Actual melt temperatures should
be measured using a pyrometer to ensure consistent and accurate processing.
Zone 2 - Center 420°F 460°F 215°C 235°C
Zone 3 - Front 430°F 470°F 220°C 240°C
Nozzle 440°F 480°F 225°C 250°C
MELT & MOLD
TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS
Melt Temperature 440°F 480°F 225°C 250°C
Wipe down mold
surface after each
production run.
https://www.avient.com/resources/safety-data-sheets?page=498
EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office.
POWDER BLUE
PX-V-114 PINK HOT MELT
https://www.avient.com/resources/safety-data-sheets?page=856
EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office.
DV2-72A CLEAR HOT MELT
VBX3574A 149B SHALE POWDER
https://www.avient.com/resource-center?document_type=59&document_subtype=0&industry=0&product_family=0&product_name=0&op=FILTER RESULTS&form_id=resource_filter_form&page=41
Supplier HellermannTyton switched to heat-stabilized Bergamid™ B70 G30H Black TM-X polyamide to produce a seat fastener at lower cost, lower weight and with greater design flexibility
ColorMatrix™ Fiber Colorant Solutions combine advanced liquid color formulations with state-of-the-art, high-pressure metering equipment to enable late-stage injection of liquid color in polyester melt extrusion spin coloring processes.
https://www.avient.com/knowledge-base/article/whats-difference-tpes-vs-silicones?ind[]=6596
Exposure to chemicals can cause changes in weight, volume and pliability that degrade TPEs and LSR to the point of failure.
Silicone is a breathable material that is beneficial for applications such as wound covering and contact lenses.
Contact us at +1.844.4AVIENT (1.844.428.4368) or use our online chat to connect with an expert.
https://www.avient.com/knowledge-base/article/whats-difference-tpes-vs-silicones?ind[]=6598
Exposure to chemicals can cause changes in weight, volume and pliability that degrade TPEs and LSR to the point of failure.
Silicone is a breathable material that is beneficial for applications such as wound covering and contact lenses.
Contact us at +1.844.4AVIENT (1.844.428.4368) or use our online chat to connect with an expert.
https://www.avient.com/knowledge-base/article/whats-difference-tpes-vs-silicones?ind[]=6601
Exposure to chemicals can cause changes in weight, volume and pliability that degrade TPEs and LSR to the point of failure.
Silicone is a breathable material that is beneficial for applications such as wound covering and contact lenses.
Contact us at +1.844.4AVIENT (1.844.428.4368) or use our online chat to connect with an expert.
https://www.avient.com/knowledge-base/article/whats-difference-tpes-vs-silicones?rtype[]=1164
Exposure to chemicals can cause changes in weight, volume and pliability that degrade TPEs and LSR to the point of failure.
Silicone is a breathable material that is beneficial for applications such as wound covering and contact lenses.
Contact us at +1.844.4AVIENT (1.844.428.4368) or use our online chat to connect with an expert.
https://www.avient.com/sites/default/files/2020-07/core-vinyl-powder-coatings-product-bulletin.pdf
CORE™ Vinyl Powder Coatings are dry blends of
suspension PVC resins that are plasticized for
flexibility.
CORE™ Vinyl Powder Coatings can be sprayed, cast
or fluidized, and are available for use in a wide
variety of markets and applications.
CORE™ Vinyl Powder Coatings
PRODUCT BULLETIN
https://www.avient.com/knowledge-base/article/developing-your-esg-framework?rtype[]=1164
If you would like to learn more about how Avient chooses sustainable suppliers, check out our Supplier Code of Conduct.
If you are interested in learning more about your ESG data and how to achieve your sustainability goals, contact us.
Contact Us
