Targeted at products for the consumer market, Artisan™ nylon (PA6) is the first material in a series of high-gloss, scratch-resistant pre-colored thermoplastics formulated to replace paint. Parts molded from Artisan pre-colored thermoplastics offer excellent scratch resistance compared to painted plastic, which minimizes the appearance of scratches. Replacing painted metal parts with Artisan materials also improves corrosion resistance.

Are current metal parts plagued with performance problems, such as corrosion? Plastics inherently resist corrosion, eliminating concerns about rust and other forms of oxidation that can compromise metal components. They are also up to 100 times more fatigue-resistant than polymers reinforced with short fibers, offering a high degree of mechanical resistance to high loads.

Are current metal parts plagued with performance problems, such as corrosion? Plastics inherently resist corrosion, eliminating concerns about rust and other forms of oxidation that can compromise metal components. They are also up to 100 times more fatigue-resistant than polymers reinforced with short fibers, offering a high degree of mechanical resistance to high loads.

Are current metal parts plagued with performance problems, such as corrosion? Plastics inherently resist corrosion, eliminating concerns about rust and other forms of oxidation that can compromise metal components. They are also up to 100 times more fatigue-resistant than polymers reinforced with short fibers, offering a high degree of mechanical resistance to high loads.

These materials provide exceptional chemical resistance, low moisture uptake, excellent dimensional stability, and high impact and wear resistance. The reinforced grades are targeted at applications in the industrial, electronics and transportation markets like pipes and tubing, electrical battery components, and under-the-hood fuel or chemical contact components.  The LubriOne PKE series are internally lubricated grades that combine chemical resistance performance with improved wear resistance and low coefficient of friction properties.

Syncure™ XLPE Cross-linkable Polyethylene Formulations FOR LOW VOLTAGE CABLES PRODUCT SELECTION GUIDE Syncure™ XLPE MOISTURE CROSS-LINKABLE POLYETHYLENE INSULATION FOR LOW VOLTAGE CABLE SYSTEMS SYSTEM S100FH S100FH-XUV S100FH-UV S100FV S100FV-UV S112NA S120NA S200FH S200FV Applications Building Wire, Building Wire, Photo-Voltaic (PV) Wire Building Wire, Teck-90 Pipe and Tube Building Wire, Tray Cable, Service Entrance Building Wire, Tray Cable, Service Entrance Specification UL 44 UL 44 UL 44, UL 4703 UL 44 UL 44 CSA 22.2 Suitable for NSF 61 UL 44 UL 44 Wire Type XHHW-2, RHW-2, USE-2, XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV XHHW-2, RHW-2, XHHW-2, RHW-2, USE-2, SIS, PV RW-90, Teck-90 – RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 Components % 83% S1054A 17% V0022G RoHS 83% S1054A 17% V0022G-UV RoHS 70% S1054A 30% V0022G-UV RoHS 50% S1054A 50% V0044G RoHS 50% S1054A 50% V0044G-UV RoHS 95% S1054A 5% S1000B 95% S1016A 5% S1037B 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Features Horizontal Flame Horizontal Flame, UV Resistant, Colors Possible Horizontal Flame, FV-1 Flame, UV Resistant, Colors Possible VW-1 VW-1, UV Resistant, Colors Possible Non-FR Rigid Pipe Applications Horizontal Flame, DBDPE-free VW-1, DBDPE-free GENERAL PROPERTIES Specific Gravity 1.01 1.02 1.10 1.31 1.31 0.92 0.95 1.01 1.31 Hardness Shore D, 10 Seconds 47 47 47 48 48 47 59 47 48 Gel 68 68 70 70 70 72 72 68 70 TENSILE PROPERTIES Tensile Strength (psi) 2800 2500 2650 3200 2650 2800 4500 2800 3200 Elongation % 400 400 540 470 540 400 80 400 470 Tensile Retention % 100 100 97 110 110 95 75 95 100 Elongation Retention % 90 90 94 100 100 90 75 90 93 ELECTRICAL Dielectric Strength (V/mil) 1000 1400 1400 1200 1200 1000 – 1000 1200 Dielectric Constant 2.31 2.45 2.61 2.61 2.61 2.24 2.1 2.31 2.61 Dissipation Factor % 0.0012 0.0080 0.008 0.0043 0.0043 0.0008 0.002 0.0012 0.0043 THERMAL Temperature Rating °C 90 90 90 90 90 90 125 90 90 Heat Deformation % 10 5 5 5 5 10 10 10 5 The Syncure™ XLPE portfolio is a two-step, silane- grafted, moisture cross-linkable polyethylene system. These materials allow for two distinct advantages over regular polyethylene: greatly improved heat resistance and oil resistance. FEATURES • Ambient curing • Flame performance • Resistant to heat, oil, creep and abrasion • Low temperature properties • Temperature ratings up to 125°C • Low capital investment • High extrusion speeds • UL/CSA bulletins 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

Are current metal parts plagued with performance problems, such as corrosion? Plastics inherently resist corrosion, eliminating concerns about rust and other forms of oxidation that can compromise metal components. They are also up to 100 times more fatigue-resistant than polymers reinforced with short fibers, offering a high degree of mechanical resistance to high loads.

Trilliant™ HC high performance formulations were developed for specific healthcare enclosure needs, including: • Chemical resistance to common disinfectants • UL 94 ratings of 5VA at 3.0, V-0 at 1.5 mm & V-1 at 0.75 mm • Retained color aesthetics after chemical exposure • Ability to utilize existing PC/PET & COPE tooling Tested using an adaptation from ASTM D543 for environmental stress cracking resistance (ESCR), 15 bars of each material were placed into jigs at 1% and 2% strain. The problem is that most polymer device housings are not able to resist repeated exposure to the chemicals involved in disinfection without cracking, crazing, or otherwise losing structural integrity. Designed for two- shot injection molding and formulated for the appropriate substrate, these medical-grade TPEs are compatible with rigid PVC, copolyesters, all PC alloys, ABS, TPUs and PEI substrates.

Antimicrobial corrosion and chemical resistant formulations to solve your medical application challenges Mimic the look of paint with scratch-resistant thermoplastics for superior results

Silicone has excellent high temperature performance and chemical resistance. Silicone/PVC/TPV replacement for medical tubing The plasticizer used in PVC compound restricts PVC in many medical applications. Kutka, Clear and Hight Hest Resistance TPEs, ANTEC, 2000. 3036 / ANTEC 2003 Figure 1a.