Avient Unveils PTFE-Free and Non-Halogen Flame Retardants for Polycarbonate at Fakuma 2023   NEW PTFE-Free LubriOne™ Internally Lubricated Formulations - These grades extend Avient’s LubriOne™ Formulations portfolio and are made without fluorinated lubricants such as polytetrafluoroethylene (PTFE). NEW Cesa™ Flame Retardant Additives, PTFE-Free and Non-Halogen for Polycarbonate – These new additives are formulated without PTFE, which is part of per- and polyfluorinated substances (PFAS).

Rigid thermoplastics include both commodity thermoplastics and engineering thermoplastics, such as polypropylene (PP), polystyrene (PS), high impact polystyrene (HIPS), polycarbonate (PC), acrynitrile-butadiene-styrene (ABS), poly(ethylene terephthalate) (PET), poly(methylmethacrylate) (PMMA), styrene acrylonitrile (SAN), poly(phenylene oxide) (PPO), polyamide (PA), PC/ABS blend and PPO/PS blend etc..

PTFE分散颜料 用于 PTFE 着色的分散颜料（色浆） 用于 PTFE 着色的分散颜料（色浆）专门用来向采用糊状挤压工艺 制造的 PTFE 零件上增加颜色，零件原料为 PTFE 分散料细粉。 为 了能够挤压出 PTFE 绝缘线和绝缘管，必须在 PTFE 细粉中混入 润滑剂（通常使用石脑油）。 颜色 PTFE 电线和电缆 PTFE 管材 PTFE 胶带 PTFE 缝纫线/长、短纤维 PTFE 牙线 使用 Colorant Chromatics 分散颜料，不仅能够简化着色 PTFE 的加工处理，还可以消除色粉颜料混合过程中发生污染的凤险。

FL.Datasheet PackingYarn.indd FIBER OPTICAL CABLES Key Features • Filament level coating produces longer lasting products  • Dissipates heat and reduces shaft wear • Excellent sealing and lubricity properties • Twisted products available for added strength • Non-PFOA PTFE products available FIBER-LINE® FIBERS FOR PACKING YARN • Carbon Fiber • Kevlar® Para-Aramid • Nomex® Meta-Aramid • Graphite • Fiberglass • PTFE Fiber FIBER-LINE® PERFORMANCE ADDING COATINGS • FIBER-LINE® Packcoat™ PTFE • FIBER-LINE® Packcoat™ Silicone Oil • FIBER-LINE® Packcoat™ Graphite • FIBER-LINE® Packcoat™ Mineral Oil FIBER-LINE® PACKING YARN PRODUCTS • Braided compression packing • Packing rings • Packing materials for pumps and valves Overview • FIBER-LINE® offers a broad range of continuous filament yarn and performance additives for braided compression packing yarn. Product ID FIBER-LINE® Coating Base Fiber Nominal Yield Description K9000 FIBER-LINE® Packcoat™ Kevlar® 660 FT/LB (400 M/KG) PFOA Free PTFE & Silicone oil NX8400 FIBER-LINE® Packcoat™ Nomex® 787 FT/LB (527 M/KG) PFOA Free PTFE & Silicone oil C24K14000 FIBER-LINE® Packcoat™ Carbon 383 FT/LB (257 M/KG) PFOA Free PTFE & graphite based lubricant dispersion C6K3600 FIBER-LINE® Packcoat™ Carbon 1675 FT/LB (1125 M/KG) PFOA Free PTFE, silicone oil, & graphite based lubricant dispersion PTFE6959 FIBER-LINE® Packcoat™ PTFE 1277 FT/LB (867 M/KG) PFOA Free PTFE & Silicone oil POPULAR PACKING YARN PRODUCTS LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

RENOL™ UL94 COMPLIANT MASTERBATCHES HOW TO USE THE TABLES UL HB GENERIC RESIN TYPE FLAME MINIMUM THICKNESS MAXIMUM LET-DOWN Acetal Copolymer (POM) HB 1.50 1:20 Acrylonitrile Butadiene Styrene (ABS) HB 1.50 1:10 Ethylene Propylene Thermoplastic Rubber (EPTR) HB 1.50 1:20 High Impact Polystyrene (HIPS) HB 1.50 1:10 Liquid Crystal Polymer (LCP) HB 0.83 1:10 Polyamide (PA) HB 3.20 1:33 Polyamide (PA66 and PA 4/6) HB 0.81 1:20 Polyamide 6 (PA6) HB 0.75 1:25 Polyamide 66 (PA66) HB 0.40 1:40 Polybutylene Terephthalate (PBT) HB 0.81 1:20 Polybutylene Terephthalate/Polycarbonate (PBT/PC) HB 1.50 1:10 Polycarbonate (PC) HB 1.50 1:15 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) HB 1.50 1:20 Polycarbonate/Polyethylene Terephthalate (PC/PET) HB 1.50 1:20 Polyethylene (PE) HB 1.50 1:50 Polyethylene Terephthalate (PET) HB 0.80 1:16.7 Polyketone HB 1.50 1:20 Polymethyl Methacrylate (PMMA) HB 3.00 1:25 Polypropylene (PP) HB 1.50 1:15 Polystyrene (PS) HB 0.83 1:15 Polyurethane (PUR) HB 1.50 1:25 Polyvinylchloride (PVC) HB 1.50 1:20 Styrene Acrylonitrile (SAN) HB 1.50 1:20 Thermoplastic Elastomer (TPE) HB 0.75 1:25 ASCEND GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide 66 21X1(a)(f2), 21SPC1(a)(f2), 21SPF1(a)(f2), 21SPG1(a)(f2), 21SPM1(a)(f2), 20NSP1(a)(f2) 0.75 V-2 1:40 22HSP(e) 0.75 V-2 1:40 64C-R 3.0 V-2 1:50 ECO366(e) 0.4 V-0 1:40 ECO366H(e) 0.2 V-0 1:25 FR350J 0.4 V-0 1:25 20NSP(a)(f2), 21SPF(a)(f2), 21SPM(a)(f2), 21SPC(a)(f2) 0.4 V-2 1:40 20NSP(a)(h)(f2), 21SPF(a)(h)(f2), 21SPM(a)(h)(f2), 21SPC(a)(h) (f2) 1.5 V-2 1:20 Polyamide 66/6 (PA66/6) ECO315(e), ECO315J(e) 0.4 V-0 1:40 M344 3.0 V-0 1:25 909 0.75 V-0 1:25 BASF GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide 6 8202(t1), 8202 Blend (t1) 0.71 V-2 1:25 8202C(t1), 8202C BLEND (t1) 1.50 V-2 1:25 8202CHS(t1) (t3), 8202C HS Blend 1.50 V-2 1:25 8202HS(t1) 1.50 V-2 1:25 B3S 0.80 V-2 1:25 B3S Q661 1.50 V-2 1:25 B3S R03 1.50 V-2 1:25 8232G HSFR(t9), B3U10G5 (t9) 1.50 V-0 1:25 Polyamide 6/66 (PA6/66) C3U (m) 0.40 V-0 1:25 KR4205(m), C3U (m), C3U (t)(m) 0.40 V-0 1:25 KR4205, C3U 0.40 V-0 1:25 Polyamide 66 1000(b), 1310-(b), Ultramid A3K Q603(+) 1.50 V-2 1:10 A3K (o) Q790(g)(f2) 0.41 V-2 1:20 A3K(f2), A3K Q601(f2) 0.41 V-2 1:20 A3SK 0.41 V-2 1:25 A5 3.00 V-2 1:33 A3W(f1), A3W FC (f1) 0.75 V-2 1:10 A3K R01 (t)(g)(f2) 0.40 V-2 1:20 Polybutylene Terephthalate B4406 G2 (o) Q798 1.50 V-0 1:20 B4406 G2(a), B4406 G2 (o) Q717(a) 1.50 V-0 1:20 B4406 G3 (o) Q798 1.50 V-0 1:20 B4406 G3(a), B4406 G3 (o) Q717(a) 1.50 V-0 1:20 B4406 G4 (o) Q798 1.50 V-0 1:20 B4406 G4(a2), B4406 G4 (o) Q717(a2) 1.50 V-0 1:20 B4406 G6 (o) Q798 3.00 V-0 1:12.5 B4406 G6(%) 1.50 V-0 1:20 B4406 G6(a1), B4406 G6 (o) Q717(a1), B4406 G6 (o) Q717 High Speed(a1) 1.50 V-0 1:20 B4406(a), B4406 (o) Q717(a) 1.50 V-0 1:20 B4406@ 1.50 V-0 1:20 B4450 G5, B4450 G5 (t) 0.40 V-2 1:50 Polyurethane (PUR) 11 85 A(a) FHF 000 (f2) 0.75 V-0 1:33 CELANESE GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Liquid Crystal Polymer (LCP) A130(+), MT1310 1.50 V-0 1:40 Polyamide 66 (PA66) A3 GF 25 V0XI, A G5 FR C4 0.40 V-0 1:25 Polybutylene Terephthalate 2012-2 1.50 V-0 1:20 2016(b) 1.50 V-0 1:20 3112-2 1.50 V-0 1:20 3116(b) 1.50 V-0 1:20 3216(b) 1.50 V-0 1:20 3310-2(f2) 1.50 V-0 1:20 3311-3(f2) 1.50 V-0 1:20 3316(b) 1.50 V-0 1:20 3316(b), 3316HF 1.50 V-0 1:20 COVESTRO GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polycarbonate 2407 + (z)(f1) 0.75-2.60 V-2 1:10 2807 + MAS183 0.75 V-2 1:25 6455 + (z) 6485 + (z)(f1) 1.50 V-0 1:25 Acrylonitrile Butadiene Styrene FR110 + 1.50 V-0 1:33 FR3005 HF + (z), FR3005 HF + BBS314 1.50 V-0 1:12.5 FR3010 + (z) 1.50 V-0 1:25 FR3010 HF + 3.00 V-0 1:25 FR3030 + 3.00 V-0 1:25 DSM GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide 46 (PA46) TE250F6(h1)(j) 0.50 V-0 1:25 Polyamide 6 F223-D(f1), F223-D /A(f1) 0.75 V-2 1:25 K222-KGV5(f1) 0.75 V-2 1:16.7 1.50 V-2 1:16.7 K-FKGS6/B(f1)(y) 0.80 V-0 1:25 Polyamide 66 (PA66) SG-KGS6/HV 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) PL460-S 1.60 V-0 1:25 Polyamide 4T (PA4T) T11 (h) 0.40 V-0 1:20 DOMO GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide (PA) J 60X1 V30 0.40 V-0 1:25 Polyamide 6 (PA6) PSB 286 0.80 V-2 1:25 3.00 V-2 1:25 Polyamide 66 A 205F(r4) 0.38 V-2 1:25 A 225F 0.75 V-2 1:25 A 50H1 (r3)(f2) 0.40 V-0 1:25 A 30G1 0.40 V-0 1:25 DUPONT GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide (PA) 132F(+)(f1), 135F(+)(f1) 0.75 V-2 1:20 HTNFR42G30NH 0.40 V-0 1:25 Polyamide 6/12 (PA6/12) 151, 151L 1.50 V-2 1:25 Polyamide 66 101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1), E101(r9)(f1), E101L(r9)(f1) 0.75 V-2 1:20 103FHS(+), 103HSL(+), RN5077E(+), E103HSL(+) 0.75 V-2 1:20 A428 0.75 V-0 1:20 FE3757(+) 0.75 V-2 1:25 FR15(+) 0.75 V-0 1:20 FR50(+)(f1) 0.35 V-0 1:20 FR7025V0F(+) 0.50 V-0 1:33 Polyamide 66/6 (PA66/6) FR72G25V0 0.80 V-0 1:25 Polyamide 66/6T (PA66/6T) FR95G25V0NH 0.40 V-0 1:25 Polyamide 6T/66 (PA6T/66) HTNFR52G15AL 0.75 V-0 1:33 HTNFR52G30BL(r3) 0.75 V-0 1:33 HTNFR52G30L(+), FE15502(+), HTNFR52G30AL(+) 0.75 V-0 1:33 HTNFR52G30NH(r6) 0.40 V-0 1:25 0.75 V-0 1:10 HTNFR52G35BL 0.75 V-0 1:25 HTNFR52G35L(+), HTNFR52G35AL 0.75 V-0 1:33 Polyamide 6T/ MPMDT HTNFR51G35L(+) 0.81 V-0 1:33 Polybutylene Terephthalate LW9030FR 1.50 V-0 1:25 S650FR 1.50 V-0 1:25 SK642FR 1.50 V-0 1:25 SK652FR1 1.50 V-0 1:16.5 T841FR (r4) 1.50 V-0 1:25 Polyethylene Terephthalate (PET) FR530(l)(+)(f1), FR530L(l)(+)(f1) 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) HTR8068 1.60 V-0 1:25 EXXONMOBIL GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Ethylene Propylene Thermoplastic Rubber (EPTR) 251-80W232(f7) 1.50 V-2 1:20 251-92W232 1.50 V-0 1:20 251-70W232 1.00 V-2 1:10 LANXESS GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide 6 B30S+(f1) 1.50 V-2 1:25 B31SK+ 1.50 V-2 1:25 Polybutylene Terephthalate B4235+ 1.50 V-0 1:10 TP364-302+, BF4232+(f1) 0.75 V-0 1:25 GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polybutylene Terephthalate 310(w) 1.50 V-0 1:20 310SE0(w) 1.50 V-0 1:20 310SE0(w),310SE0R(w) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr1) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr2) 1.50 V-0 1:20 457(w) 1.50 V-0 1:20 457(w), 451(w) 1.50 V-0 1:20 553(a)(f1)(w) 1.50 V-0 1:20 553(a)(f1)(w), 553E(a)(f1)(w), 553U(a)(f1)(w) 1.50 V-0 1:20 553(w)(f1), 553M(w)(f1) 1.50 V-0 1:20 DR48(w) 1.50 V-0 1:20 DR48,DR48M 1.50 V-0 1:20 V4760(a2) 0.40 V-0 1:20 EXVX1259, ENH4550 0.40 V-0 1:20 771 0.75 V-0 1:25 Polybutylene Terephthalate/ Polycarbonate (PBT/PC) 357(f1)(w)(IC), 357M(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357X(f1) 1.50 V-0 1:20 V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 V-0 1:20 1.50 V-0 1:20 357(w)(f2)(IC), 357M(w)(f2)(IC), 357U(w)(f2)(IC) 1.50 V-0 1:20 GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polycarbonate 221(f2) 1.50 V-2 1:25 221R(f2) 1.50 V-2 1:25 500(f2), 500R(f2) 3.00 V-0 1:33 503(f1) 3.00 V-0 10:1 1.50 V-0 10:1 503(f1), 503R(f1) 3.00 V-0 10:1 1.50 V-0 10:1 943(ab) 1.50 V-0 1:20 943(f1) 1.50 V-0 1:20 943(f1), 923(f1) 1.50 V-0 1:20 950A, 920ASR, FXD911A(GG), 940ASR 1.50 V-2 1:25 CFR7630(f1)(gg*) 1.50 V-0 1:25 ML5139R(f2) 3.00 V-0 1:33 950A, FXD911A(GG), 940ASR 3.00 V-0 1:25 943 1.50 V-0 1:20 920A Acrylonitrile Butadiene Styrene C2950 1.50 V-0 6:100 C6200(GG) 2.00 V-0 1:20 Acrylonitrile Styrene Acrylate/ Polycarbonate (ASA/PC) HRA222 (GG) 0.80 V-2 1:20 SOLVAY GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyphenyl Sulfone (PPSU) R-5100 (r1)(##), R-5000 (r1)(##) 1.50 V-0 1:10 Polyphthalamide (PPA) AFA-4133 V0(+) (*) 0.75 V-0 1:25 BASE RESIN GENERIC SPECIFIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN ALBIS Polypropylene (PP) PP 13 CV2 14 1.50 V-2 1:25 AVIENT Polyvinylchloride M3700(X), M3755(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:25 CHI MEI Acrylonitrile Butadiene Styrene (ABS) PA-765(+) 1.50 V-0 1:10 Acrylonitrile Butadiene Styrene PC-510(+) 1.50 V-0 1:25 EMS-CHEMIE Polyamide 6 (PA6) Grilon A 26 V0 0.75 V-0 1:25 FORMOSA Polycarbonate (PC) #1700+(f2) 0.36-0.42 V-2 1:50 GEON Polyvinylchloride 85891(f1) 1.70 V-0 1:20 85891(f2) 1.70 V-0 1:20 M3700(X) 1.50 V-0 1:25 M3900 1:25 INEOS Polystyrene (PS) 855 HV 3.00 V-1 100:4 INVISTA Polyamide 66 FRU4800 XHL (r1) 0.40 V-0 1:25 U4820L (r1) 0.40 V-2 1:25 BASE RESIN GENERIC SPECIFIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN KINGFA Polyamide 66 (PA66) PA66-R11G25 (##) 0.25 V-0 1:25 KURARAY Polyamide 9T (PA9T) GP2300S 0.40 V-0 1:25 LG CHEM Acrylonitrile Butadiene Styrene LUPOY GP-5106-F 3.00 V-0 1:20 LOTTE CHEMICAL Acrylonitrile Butadiene Styrene (ABS) VH-0800(+) 1.50 V-0 1:25 Polycarbonate (PC) HN-1064(+) 0.75 V-2 1:10 1.20 V-1 1:10 Polystyrene (PS) VH-1800+ 1.50 V-0 1:25 MITSUBISHI Polycarbonate (PC) S-2000+(f1) 1.50-1.80 V-2 1:10 POLYMER PRODUCTS Polystyrene (PS) ZYNTAR 351 2.00 V-0 1:20 1.50 V-0 1:20 ZYNTAR 7000 2.00 V-0 1:25 ZYNTAR 702 2.00 V-0 1:25 8020 2.00 V-0 1:20 8120 2.00 V-0 1:20 8130 1.50 V-0 1:20 POLYMER RESOURCES Polycarbonate PC-FR1A-D, PC- FR2A-D, PC-FR3A-D 3.00 V-0 1:33 1.50 V-2 1:33 SUMITOMO Liquid Crystal Polymer (LCP) E6007LHF(ra) 0.30 V-0 1:25 E6007LHF-MR(gt) 0.20 V-0 1:12.5 BASE RESIN GENERIC SPECIFIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN TORAY Polyamide 6 (PA6) 1017 1.60 V-2 1:16.5 Polyamide 66 3004-V0(rr), CM3004-V0(rr) 0.40 V-0 1:25 TRINSEO Polycarbonate (PC) 891(w) 1.10 V-0 1:25 WELLMAN Polyamide 66/6 (PA66/6) 220-N, 21L-N, 22L-N 1.50 V-2 1:25 WESTLAKE Polyvinylchloride 6597(f1), HF-6597(f1) 1.50 V-0 1:25 SP-7107 (f1)(a) 3.00 V-0 1:25 5VA AND 5VB BASE RESIN GENERIC SPECIFIC MINIMUM THICKNESS FLAME RATING COLORS MAXIMUM LET-DOWN AVIENT Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 COVESTRO Acrylonitrile Butadiene Styrene FR3010 + (z) 3.00 5VA ALL 1:25 DUPONT Polyamide 66/6T (PA66/6T) FR95G25V0NH 1.50 5VA ALL 1:25 Polybutylene Terephthalate LW9030FR 2.00 5VA BLACK 1:25 3.00 5VA ALL 1:25 SK642FR 1.50 5VA BLACK 1:25 GEON Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 Polybutylene Terephthalate/ Polycarbonate (PBT/PC) V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 5VA ALL 1:20 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

Common healthcare applications include medical tubing, gaskets and stoppers, bags, bottles and films, grips, handles and medical devices. VERSAFLEX™ HC MEDICAL TUBING GRADES • Improve extrusion rates, achieve high service temperature performance or increase clarity in medical tubing • Traditional and bio- based formulations specifically for biopharmaceutical tubing to meet the needs for weldability and minimize extractables during processing VERSALLOY™ HC SERIES • Obtain better flow in long, thin paths and lower shrink rates versus typical TPVs with our alloys • Color easily and obtain a smooth tactile feel VERSAFLEX™ HC GASKETS & STOPPERS SERIES • Achieve no coring, good puncture and resealability in static stoppers • Meet low COF and low stiction requirements in dynamic seals CL E SERIES • Increase clarity and flexibility in bags, bottles and films • Mitigate risk with plasticizer-free formulations for film extrusion • Deliver excellent odor & O2 barrier performance for film extrusion INDUSTRY BULLETIN TPE HEALTHCARE PRODUCT SELECTOR GUIDE Versaflex™ HC Medical Tubing Grades Versaflex™ HC MT222 Clear 66A 0.88 14 - 334 2.30 629 4.34 898 6.19 430 220 36 ✔ ✔ High clarity, without plasticizersVersaflex™ HC MT224 Clear 75A 0.89 19 - 468 3.23 773 5.33 1360 9.40 530 321 56 ✔ ✔ Versaflex™ HC MT226 Clear 84A 0.88 20 - 606 4.17 885 6.10 1600 11.00 600 433 76 ✔ ✔ Versaflex™ HC MT317 Clear 68A 0.89 17 69 450 3.10 660 4.55 870 6.00 470 221 39 ✔ ✔ Very high service temperature Versaflex™ HC BT218 Natural 67A 0.89 19 69 381 2.60 683 4.70 1186 8.20 608 - - ✔ ✔ Weldable, kink resistant Versalfex™ HC BIO BT218 Natural 70A 0.88 18 58 416 2.87 668 4.60 1190 8.20 630 - - ✔ ✔ Weldable, kink resistant, contains 40% bio-derived content (Gen 1 biomass) Versaflex™ HC Gaskets & Stoppers Series Versaflex™ HC 2110-35N Natural 34A 0.90 19 47 145 1.00 261 1.80 400 2.76 620 97 17 ✔ ✔ Good resealing Versaflex™ HC 2110-43N Natural 43A 0.98 12 46 134 0.92 368 2.54 723 4.98 710 - - ✔ ✔ Good compression set Versaflex™ HC 2110-57B Black 59A 1.01 20 37 369 2.54 558 3.85 537 3.70 350 147 26 ✔ ✔ Low stiction Versaflex™ CL E Series Versaflex™ CL E85 Clear 84A 0.90 20 72 752 5.18 1160 8.00 1550 10.70 450 433 76 ✔ ✔ High clarity, without plasticizers; E95 also offers excellent odor & O2 barrier Versaflex™ CL E90 Clear 90A 0.90 27 73 1000 6.89 1230 8.50 1830 12.60 57 - - ✔ ✔ Versaflex™ CL E95 Clear 95A 0.90 38 71 1680 11.60 1730 11.90 2500 17.20 580 720 126 ✔ ✔ Versaflex™ HC 3810 Series Versaflex™ HC 3810-20N Natural 20A 0.88 16 54 123 0.80 185 1.30 342 2.40 650 - - ✔ - Formulated without animal derivatives, excellent colorability, translucent Versaflex™ HC 3810-30N Natural 30A 0.89 18 58 170 1.20 245 1.70 459 3.20 680 - - ✔ - Versaflex™ HC 3810-40N Natural 40A 0.88 19 59 191 1.30 275 1.90 506 3.50 670 - - ✔ - Versaflex™ HC 3810-50N Natural 50A 0.89 21 61 264 1.80 366 2.50 699 4.80 690 - - ✔ - Versaflex™ HC 3810-60N Natural 60A 0.88 24 65 459 3.20 594 4.10 790 5.40 510 - - ✔ - Versaflex™ HC 3810-70N Natural 70A 0.88 28 67 535 3.70 684 4.70 1000 6.90 570 - - ✔ - Versaflex™ HC 3810-80N Natural 80A 0.88 30 67 689 4.80 869 6.00 1390 9.60 620 - - ✔ - Versaflex™ HC 3810-90N Natural 90A 0.88 27 89 1087 7.50 1350 9.30 1890 13.00 570 - - ✔ - Versalloy™ HC 9210 Series Versalloy™ HC 9210-45N Natural 45A 0.89 19 39 160 1.10 320 2.20 484 3.33 480 100 18 - ✔ Smooth surface aestheticsVersalloy™ HC 9210-55N Natural 53A 0.89 20 44 208 1.44 335 2.31 580 4.00 610 120 21 - ✔ Versalloy™ HC 9210-70N Natural 70A 0.89 23 53 356 2.45 510 3.52 780 5.38 590 180 32 - ✔ Versalloy™ HC 9220 Series Versalloy™ HC 9220-70 Natural 70A 0.95 17 51 453 3.12 - - 643 4.43 265 208 36 ✔ ✔ ExtrudableVersalloy™ HC 9220-80 Natural 80A 0.94 18 59 553 3.67 777 5.36 945 6.52 415 208 36 ✔ ✔ Versalloy™ HC 9220-90 Natural 90A 0.94 25 55 1030 8.13 1350 9.33 1945 13.45 620 400 70 ✔ ✔ Standard Healthcare Grades Versaflex™ G2705N Natural 60A 0.88 - - - - 528 3.64 670 4.62 470 - - ✔ ✔ Natural, high strength Versaflex™ CL 2242 Clear 43A 0.89 23 - 152 1.05 294 2.02 731 5.00 780 124 22 ✔ ✔ High clarity, boilable Versaflex™ CL 2250 Clear 50A 0.89 20 - 220 1.52 337 2.32 827 5.70 770 140 25 ✔ ✔ Versaflex™ OM Series Versaflex™ OM 1040X Natural 42A 0.92 22 - 180 1.24 301 2.08 504 3.47 580 100 18 ✔ ✔ ABS/PC overmoldVersaflex™ OM 3060 Clear 59A 0.90 33 - 420 2.90 360 2.48 500 3.45 480 180 32 ✔ ✔ Versaflex™ OM 8940X-1 Clear 42A 0.91 - - 233 - 311 - 1573 - 1059 - - - - PK, COPE overmold Versaflex™ OM 4052 Natural 56A 1.01 27 - 271 - 557 - 1680 - 670 - - ✔ - Excellent chemical resistance; PK, PC, ABS, PC/ABS overmoldVersaflex™ OM 4063 Natural 54A 1.12 30 - 365 - 580 - 1640 - 670 - - ✔ - Color Hardness Specific Gravity Compression Set @ 23°C Compression Set @ 100°C 100% Modulus 300% Modulus Tensile Strength Elongation Tear Strength ISO 10993 USP VI Special Characteristics ASTM Shore A ASTM/ISO ASTM % ASTM % ASTM psi MPa ASTM psi MPa ASTM psi ISO MPa ASTM % ASTM pll ISO kN/m GENERAL PROPERTIES TENSILE PROPERTIES OTHER For further information on specific grades, review technical data sheets.

Medical Packaging Medical Tubing Medical Packaging

Medical Tubing Medical Devices & Equipment Medical Packaging

Mevopur™ Healthcare Bio-based Polymer Solutions for Medical Devices and Pharmaceutical Packaging Manufacturers of medical devices and pharmaceutical packaging are increasingly faced with the challenge of integrating sustainability into the design of their products. KEY CHARACTERISTICS • Available for polyethylene, polypropylene, ABS, polycarbonate and styrenics • Bio-content of resin carrier varies from 70% to 100% depending on polymer—calculated to ASTM D6866 standard • Manufactured at four ISO 13485 certified sites, providing global consistency and security of supply • Documented change control beyond CAS number, reducing risk of change • Drop-in solutions that can be processed like fossil-based grades on common injection molding and extrusion machines • Can be provided as ready-to-use pre-colored or additive formulation REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 - USP and (incl. class VI) - European Pharmacopeia, monograph 3.1.3/ 3.1.5 (polyolefin packaging materials) - USP (polyethylene) - Elemental impurities as per ICH Q3D • Registered Drug Master File (Type III) and/or Device Master File • Food contact according to US FDA and APPLICATION BULLETIN Sustainability Spotlight Bio-polymers Healthcare use limitations apply—see below. It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

Rigid thermoplastics include both commodity thermoplastics and engineering thermoplastics, such as polypropylene (PP), polystyrene (PS), high impact polystyrene (HIPS), polycarbonate (PC), acrynitrile-butadiene-styrene (ABS), poly(ethylene terephthalate) (PET), poly(methylmethacrylate) (PMMA), styrene acrylonitrile (SAN), poly(phenylene oxide) (PPO), polyamide (PA), PC/ABS blend and PPO/PS blend etc..