GL AS S/ EP OX Y TA B M AT ER IA L N O T AB BREAK Hammerhead with 5 lb/ft3 (80 kg/m3) 420 lbs 191 kg Hammerhead with 7 lb/ft3 (115 kg/m3) 2 in 370 lbs 168 kg Hammerhead with 8 lb/ft3 (135 kg/m3) 332 lbs 151 kg 984 lbs 446 kg Glass/Polyester with Balsa Core 1298 lbs 589 kg Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 501 lbs 227 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 839 lbs 381 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 1156 lbs 524 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - Crestomer 1152PA Adhesive NA 1530 lbs 694 kg Hammerhead with 8 lb/in3 (135 kg/m3) Core Density - Crestomer M1-30 Adhesive NA 1471 lbs 667 kg Mixed Conditions ADHESIVE DESCRIPTION ADHESIVE GRADE MANUFACTURER AVERAGE BOND STANDARD DEVIATION FAILURE MODE BEST ADHESION 2k Urethane 75421 Lord 2281 psi 15.73 MPa 184 psi 1.27 MPa Substrate Cohesive 2k Acrylic SA1-705 GRY1 AccraLock 2211 psi 15.24 MPa 78 psi 0.54 MPa Substrate 2k Acrylic Plexus MA420 ITW 2171 psi 14.97 MPa 262 psi 1.81 MPa Substrate 2k Acrylic SA10-05 Blk1 AccraLock 2102 psi 14.49 MPa 138 psi 0.95 MPa Substrate 2k Urethane 75451 Lord 2047 psi 14.11 MPa 68 psi 0.47 MPa Cohesive 2k Acrylic SA1-705 GRY 1:2 AccraLock 1966 psi 13.56 MPa 68 psi 0.47 MPa Substrate 2k Acrylic Scotchweld 8010 3M 1907 psi 13.15 MPa 61 psi 0.42 MPa Adhesive Cyanoacrylate Gorilla Glue Gorilla Glue 1885 psi 13.00 MPa 432 psi 2.98 MPa Cohesive 2k Acrylic Crestabond PP-04 Scott Bader 1873 psi 12.91 MPa 281 psi 1.94 MPa Substrate  2k Acrylic SA10-05 Blk 10:2 AccraLock 1779 psi 12.27 MPa 127 psi 0.88 MPa Cohesive 2k Urethane 75422 Lord 1716 psi 11.83 MPa 190 psi 1.31 MPa Cohesive Adhesive 2k Urethane 75452 Lord 1535 psi 10.58 MPa 98 psi 0.68 MPa Adhesive 2k Methacrylate Polyfuse Icon Containment 1610 psi 11.10 MPa 98 psi 0.68 MPa Adhesive INTERMEDIATE ADHESION 2k Acrylic FA10-05 Blk C010817 AccraLock 724 psi 4.99 MPa 58 psi 0.40 MPa Cohesive 2k Acrylic FA10-05 Blk1 AccraLock 722 psi 4.98 MPa 44 psi 0.30 MPa Cohesive 2k Epoxy Loctite Epoxy Instant Mix Loctite 508 psi 3.50 MPa 81 psi 0.56 MPa Adhesive 2k Epoxy Gorilla Glue Epoxy Gorilla Glue 341 psi 2.35 MPa 198 psi 1.37 MPa Adhesive NOT RECOMMENDED  2k Epoxy Loctite Epoxy Marine Loctite 0 0 No bond ADHESIVE SELECTION Brands identified are owned by the manufacturers of the adhesive products. 1 surface sanded with 220 grit scuff prep 2 surface primed with 459T FASTENER TYPE BENEFITS CONSIDERATIONS Through-Bolting Best mechanical locking system Need back side access to panel Screw-In Anchor Highest pullout strength Requires pilot hole Cup Washer Spreads compressive load Requires relief hole; For substructure and hard point attachment Wide Grip (Bulb-Style) Rivet Ease of use—no installation torque limitations For lower load attachments Sheet Metal or Wood Screw Readily available, low cost Penetrate both skins for improved pullout Shoulder Washer Limits compressive load Requires relief hole; For substructure and hard point attachment For more information on installation, adhesives, and fasteners for specific applications, please contact Avient.

POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables.

Barrel Temperatures °F (°C) PP Mineral-Filled PP Glass-Filled PP HDPE LDPE Rear Zone 360–390 (182–200) 400–420 (204–216) 400–420 (204–216) 370–390 (188–199) Center Zone 370–400 (188–204) 410–430 (210–221) 425–445 (218–229) 410–430 (210–221) 380–400 (193–204) Front Zone 390–410 (200–210) 420–440 (216–227) 435–455 (224–235) 420–440 (216–227) 390–410 (199–210) Nozzle 400–425 400–425 Melt Temperature 400–425 400 - 425 Mold Temperature °F (°C) 60–120 (16–49) Pack & Hold Pressure 50–75% of injection pressure Injection Velocity (in/s) 1.0–3.0 Back Pressure (psi) 50–100 Screw Speed (rpm) 30–100 Drying Parameters Hours @ °F (°C) Not typically required.

Base Resin PC PC/PSU PES PEI PP ABS PEEK PA Barrel Temperatures* °F (°C) Rear Zone 530–560 (277–293) 550–575 (288–302) 660–700 (349–371) 675–725 (357–385) 390–420 (199–216) 425–460 (219–238) 680–730 (360–388) 430–500 (221–260) Center Zone 515–560 (269–288) 540–565 (282–296) 650–690 655–710 (352–377) 380–405 (193–207) 415–450 (213–232) 670–710 (354–377) 420–490 (216–254) Front Zone 510–525 (266–274) 530–555 (277–291) 640–680 (338–360) 655–700 (346–371) 370–395 (188–202) 405–440 (207–227) 410–480 (210–249) Nozzle 520–535 (271–280) 540–565 (282–296) 650–690 665–710 (352–377) 380–400 (193–204) 415–450 (213–232) 660–700 (349–371) 420–490 (216–254) Melt Temperature 525–560 (274–293) 530–580 (277–304) 650–700 (343–371) 660–730 (349–388) 375–395 (191–202) 410–460 (210–238) 650–730 (343–388) 420–500 (216–260) Mold Temperature 175–250 (80–121) 160–220 (71–104) 280–350 (138–177) 275–350 (135–177) 100–135 (38–57) 150–180 (66–82) 300–425 (149–219) 160–230 (71–110) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 0.5–2.0 Back Pressure psi 50 Screw Speed rpm 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70** Drying Parameters °F (°C) 6 hrs @ 250 4 hrs @ 250 4 hrs @ 275 (135) 4 hrs @ 250 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.0:1–2.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 * A reverse temperature profile is important to obtain optimum conductive properties.

Additional Criteria • Total heat release (MJ/m²) • pHRR (kW/m²) • Time of Ignition (s) • Smoke production • Acidity • Flaming droplets This example demonstrates the need to consider the complete cable design, as using XLPE for the insulation layer would not give the required Euroclass.

O Vendedor baseou quaisquer recomendações ao Comprador em informações que o Vendedor considera confiáveis, mas o Vendedor não oferece nenhuma garantia quanto a quaisquer resultados que o Comprador possa obter no(s) uso(s) do(s) Produto(s). Seller has based any recommendations to Buyer upon information that Seller considers reliable, but Seller makes no warranty as to any results Buyer might obtain in Buyer’s use(s) for the Product.

Please note that any changes made to your profile may impact on your current application(s). We will respond to your request(s) as soon as reasonably practicable, but in any case, within the legally required period of time.

Leadership, EHS&S-PS, Facility Services, Design & Development, Information Technology, Sourcing, Logistics, Legal, and Human Resources 65536-21623Certificate No: Page 4 of 53 ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A. Industrial Valle del Cinca S/N Apartado Barbastro, Huesca E-22300 65536-116858Certificate No: Page 8 of 53 ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A.

S: Şirkette, Kuralları ihlal eden bir şeyler gördüm. S: Birkaç iş seyahati yapmam gerekiyor. S: İş seyahatlerim sırasında bir dizüstü bilgisayar kullanıyorum.

COLORSPERSE ORANGE 73383