Available in natural, white and black grades, the Edgetek HI PKE series is also colorable with support from Avient. TECHNICAL PROPERTIES(1) TEST METHOD Edgetek™ ET8900-0011 HI UV NAT Edgetek™ ET8900-0012 HI UV White Edgetek™ ET8900-0013 HI UV Black Physical Density/Specific Gravity ASTM D792 1.13 g/cm3 1.15 g/cm3 1.13 g/cm3 Molding Shrinkage - Flow ASTM D955 1.4–2% 1.4–2% 1.4–2% Mechanical Tensile Strength (Yield) ASTM D638 5,900 psi 5,800 psi 5,800 psi Tensile Modulus(2) ASTM D638 169,000 psi 161,087 psi 176,000 psi Flexural Modulus(3) ASTM D790 187,000 psi 190,985 psi 188,000 psi Impact Notched Izod Impact 73°F (23°C), 0.125 in ASTM D256A 17.3 ft-lb/in 16.5 ft-lb/in 16.5 ft-lb/in Notched Izod Impact -22°F (-30°C), 0.125 in ASTM D256A 3.2 ft-lb/in 3.0 ft-lb/in 3.3 ft-lb/in Thermal (HDT) 66 psi (0.45 MPa), 0.125 in ASTM D648 121°C 135°C 129°C NORTH AMERICA GRADES (1) Data based on single lot of lab generated samples.

680.00 Black 2% Black 3C 680.01 Brown 6% 4625C 680.02 Red 15% 7621C 680.03 Orange 6% 1595C 680.04 Yellow 6% 605C 680.05 Green 6% 7732C 680.06 Blue 10% 7697C 680.07 Violet 15% 7665C 680.08 Grey 5% 7539C 680.09 White 12% 7499C * Recommended let down ratio addition rates.

This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com NEUSOFT EXPRESS STANDARD COLOR PALETTE TPUs are available in neat or 20% BaSO4 formulations, except black, which is not available in 20% BaSO4 loading. PMS 324C PMS Cool Gray 11C PMS Black 6C PMS 290C PMS 1767C PMS 144C PMS 3405C PMS 358C

CHAPTER 1 | APPLICATION SUMMARY Design Guide 5 GT5200-0013 GT6000-0004 GT7300-0006 GT5200-5003 GT6000-5002 GT7300-5007 Specific Gravity* 2.0 3.0 2.0 2.5 2.6 2.2 Color Options* Various Various Black to Grey Black Various Various Electroplating No Possibly Yes Possibly Possibly Yes Base Resin PP PA6 ABS PP PA6 ABS FDA Compliant* Yes Yes Yes Yes No Yes Region Produced North America North America North America Europe Europe Europe Full Name X GT5200-0013 PT White X GT6000-0004 PT White X GT7300-0006 PT Black GT7300-5003 Black FD GT6000-5002 EI White 1 GT7300-5007 X2 White FD *Please contact Avient for additional information 6 Gravi-Tech CHAPTER 2 | PROCESS SETTINGS Density Modified Formulations Gravi-Tech™ polymer-metal composites are high-density materials developed as thermoplastic- based alternatives to metals. Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 430–500 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 440–510 (225–265) 483–522 (252–272) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 450–520 (230–270) 487–527 (254–274) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 460–530 (235–275) 490–530 (255–275) 530–600 (275–315) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 530–580 (276–300) 500–565 (260–300) 530–615 (275–325) 430–495 700–725 (370–385) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–200 (65–90) 140–250 (60–120) 160–240 (70–115) 300–400 (150–200) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (80) 4–5 Hours 0.10%–0.20% 275 (135) 0.02%–0.04% 250 (125) 0.02% 300 (150) 0.10% 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or ReverseTaper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2.0–5.0 in/sec; 50–125 mm/sec Injection Pressure 2,000–4,000 psi; 13,000–30,000 kpa Back Pressure 0–50 psi; 0–350 kpa Screw Speed 25–75 RPM Cushion 0.125"–0.250"; 3.175 mm–6.35 mm Screw Compression Ratio2 2.0:1–2.5:1 Design Guide 7 Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 430–500 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 440–510 (225–265) 483–522 (252–272) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 450–520 (230–270) 487–527 (254–274) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 460–530 (235–275) 490–530 (255–275) 530–600 (275–315) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 530–580 (276–300) 500–565 (260–300) 530–615 (275–325) 430–495 700–725 (370–385) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–200 (65–90) 140–250 (60–120) 160–240 (70–115) 300–400 (150–200) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (80) 4–5 Hours 0.10%–0.20% 275 (135) 0.02%–0.04% 250 (125) 0.02% 300 (150) 0.10% 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or ReverseTaper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2.0–5.0 in/sec; 50–125 mm/sec Injection Pressure 2,000–4,000 psi; 13,000–30,000 kpa Back Pressure 0–50 psi; 0–350 kpa Screw Speed 25–75 RPM Cushion 0.125"–0.250"; 3.175 mm–6.35 mm Screw Compression Ratio2 2.0:1–2.5:1 Comments 1. Venting Guidelines by Resin • PC: .001"–.002" depth & .250" width • PC/PSU: .002"–.003" depth & .250" width • PES: .003"–.004" depth & .250" width • PEI: .001"–.003" depth & .250" width • PP: .001"–.002" depth & .250" width • ABS: .0015"–.0025" depth & .250" width • PEEK: .002"–.004" depth & .250" width FIGURE 40 - Venting Guidelines Vent Groove Vent Land Vent FIGURE 44 - Venting guidelines FIGURE 43 - Venting areas 20 Gravi-Tech CHAPTER 5 | PROCESS OPTIMIZATION Process optimization ensures a quality process and minimizes cycle time.

Version / Date: 1 (no adjustments) / 30.12.2024 Page 2 of 2 Annex I to the certificate: Sustainable materials handled by the certified site (This annex is applicable for all scopes except of Trader, Trader with storage, Warehouse, Logistic centres, MTBE and ETBE) This annex is only valid in connection with the certificate: ISCC-PLUS-Cert-PL214-26100824 issued on 30.12.2024 Input material Output material Add-ons (voluntary)1) Raw material category2) SAI FSA3) FEFAC4) Polypropylene (PP) Plastic Compounds (PP) NO Bio Bio-circular Circular N/A N/A Polyethylene (PE) Plastic Compounds (PE) NO Bio Bio-circular Circular N/A N/A 1) ISCC PLUS add-ons (voluntary application, see www.iscc-system.org for further information): • 202-04: Food Security Standard • 205-02: Consumables • 202-07: Low ILUC-risk feedstock • 205-03: Non GMO for food and feed • 205-01: GHG emission requirements • 205-04: Non GMO for technical markets 2) Bio raw materials complies with the ISCC Principles 1 – 6 for the cultivation and harvesting of sustainable biomass.

PW 6 Opaque CARBON BLACK Medium Jet C.I. PBk 7 Opaque IRON OXIDE BLACK C.I. SPECTROPHOTOMETER CONFIGURATION FOR COA Type: Datacolor Illuminate: D65 Daylight Observer: 10 degree, large area view, specular included EXPLANATION OF SPECTROPHOTOMETRIC VALUES DL* Lightness/Darkness Difference (Delta L*) The shade of gray (black/white) + = Lighter - = Darker Da* Red/Green Color Difference (Delta a*) + = Hue is redder (or less green than) - = Hue is greener (or less red than) Db* Yellow/Blue Color Difference (Delta b*) + = Hue is yellower (or less blue than) - = Hue is bluer (or less yellow than) DC* Difference Attributed to Chromaticity (Delta C*) + = More saturated than (more color intensity) - = Less saturated than (less color intensity) DH* Difference Due to Hue Only (Delta H*) DE* Total Color Difference (Delta E*) DE is a mathematical calculation utilizing the DL*, Da* and Db*, and therefore, used alone this number can be misleading as to the true color of a material.

该产品组合为PE基料，但可根据要求 提供PP基料。 法规支持 经过预测试的原材料： - ISO 10993-1 - USP 第、章（VI类） - USP （指南），6.2.3 可萃取元素； USP - ICHQ3D/USP 2 可萃取金属 - 欧洲药典 3.1 聚烯烃（如适用） FDA发布的注册药品管理档案（III类）和/或医 疗器械管理档案 食品接触符合FDA/EU*要求 主要特性 在三个通过ISO 13485认证的医疗生产线生产 全球统一的配方，提供全球一致性和供应链保 障 变更控制记录的不限于CAS编号级别，降低变 更风险 不含动物源性物质和邻苯二甲酸盐 标准母粒在PE载体中提供，可根据要求在PP 中提供 可以采用针对应用选择的特定树脂提供预着色 配方 药物类型 颜色说明 潘通色号参考 埃万特产品代码 （PE基） 肾上腺素能激动剂组合 浅绿色 373 C PE6M176349 肾上腺素能激动剂 紫色 2583 C PE4M176057 抗感染药 棕褐色 467 C PE8M176130 非甾体类抗炎药 灰色 冷灰色 4 C PE7M176184 甾体类抗炎药 粉色 197 C PE3M176237 免疫调节剂类抗炎药 橄榄绿 5763 C 按要求提供 β-受体阻滞剂 黄色 黄色 C PE1M176160 β-受体阻滞剂组合 深蓝色 281 C PE5M176272 碳酸酐酶抑制剂 橘黄色 1585 C PE2M176089 细胞毒素 黑色 6 C PL9M176008 缩瞳剂 深绿色 348 C PE6M176267 散瞳剂和睫状肌麻痹剂 红色 1797 C PE3M176236 前列腺素类似物 绿松石 326 C PE5M176273 适用医疗保健使用限制—见下文。 埃万特还针对容器/瓶子提供REMAFIN™ EP白色预着色配方和浓缩物， 以低密度和高密度PE和PP树脂形式供应。

TRACTOR TRAILER OEM C A R G O T R A I L E R S I D E W A L L S • Suitable CFA design for PE sheet extrusion in layered, metal-laminated inner sidewall panels • Improved fuel economy and reduced trailer tare weight • Uncompromised outdoor durability and part strength • Reduced polymer usage while maintaining physical and dimensional requirements • Delivered significant 20% part weight reduction with CFA solution • Provided formulation to enhance throughput, leading to a 43% overall cost reduction • Created value beyond initial technical challenge with a credible problem solving approach • Enhanced performance with excellent sidewalls, uniform foamed plastic core, superior flatness, and rigidity Hydrocerol™ Chemical Foaming Additives (CFAs) and Cesa™ Nucleant Additives KEY REQUIREMENTS WHY AVIENT?

Modified PPSU Neat PPSU https://www.avient.com/products/polymer-colorants/high-temperature-color-concentrates/colorant-chromatics-pes/psu/ppsu-color-concentrates-0

PowerPoint Presentation M E D I C A L C O N N E C T O R S • Ongoing production with no change to regular set up • Excellent processing and demolding performance • Color stability during processing • Excellent chemical and impact resistance • Enabled efficient ongoing production rates without changing any processing parameters • Safeguarded color stability and transparency during processing for optimal aesthetics • Ensured regulatory requirements for biocompatible ISO109931 and FDA were met • Provided a solution effective across a range of high-temperature polymers, including PEEK, PPSU, PES, PSU, PEI, LCP, and PPS Colorant Chromatics Evoluscend non- PFAS* high-temperature polymer mold release additive KEY REQUIREMENTS WHY AVIENT AVIENT SOLUTION PRODUCTIVITY + REGULATORY LEARN MORE ELECTRICAL COMPONENT OEM (*) A non-PFAS additive manufactured without non-intentionally added (NIA) PFAS or PTFE. (*) manufactured without intentionally added PFAS and without PTFE (1) refers to sulfone products only https://www.avient.com/products/polymer-additives/processing-enhancement-additives/colorant-chromatics-evoluscend-non-pfas-high-temperature-mold-release-additive Slide Number 1