https://6fefcbb86e61af1b2fc4-c70d8ead6ced550b4d987d7c03fcdd1d.ssl.cf3.rackcdn.com/cms/guidance_docs/pdfs/000/002/303/original/SER-Methodology.pdf? 1589193748 https://cdn.cdp.net/cdp-production/cms/guidance_docs/pdfs/000/002/496/original/SER-Methodology.pdf?

BASE RESIN PPA PC PSU PES PPS CO- POLYMER ACETAL PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 520–560 (271–293) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 530–570 (277–299) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 550–580 (288–305) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 550–600 (288–316) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 560–600 (293–316) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 150–225 (66–107) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 300 (150) 4 hrs @ 250 (121) 2 hrs @ 200 (93) 3 hrs @ 300 (150) 4 hrs @ 180 (82) Allowable Moisture % < 0.05 < 0.02 < 0.02 < 0.04 < 0.02 0.15–0.20 < 0.02 0.10–0.20 Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

In addition to PA66, our solutions also can be customized using multiple base resins such as PC and PBT to meet specific customer needs.

Edgetek 3D/LDS Solutions can be formulated in PC, LCP, PPS and be customized to meet customers’ specific needs.

Cesa laser marking solutions can be used with a variety of thermoplastics including, but not limited to: • PP • PC/ABS • Polyamide • Polyacetal (POM) Applications include: • Traceability, UPC, Branding • Food Packaging Lot Codes • Industrial Safety Tags & Equipment • Wire & Cable Part Numbers & Gauge Size • Automotive Components • PE • PET • PMMA • Polyolefins PRODUCT BULLETIN WHY LASER MARKING?

BENEFITS • High additive loading for optimal UV stabilization • Solutions available for a large number of injection molded polymers including PP, PE, PS, HIPS, ABS, SAN, PA (nylon), PBT, Co-PET, PC, POM and TPU • Can be combined with colors and other additives in Smartbatch™ solutions • Formulations can be customized to meet specific regulatory compliance, e.g., EU and US food contact, toy, UL 94 recognition PRODUCT BULLETIN Copyright © 2023, Avient Corporation.

KEY CHARACTERISTICS • Fabric FX can be formulated to include properties such as UV color protection and anti-scratch performance • Fabric FX can be processed on standard molding machinery • Different matrix materials can be enhanced with Fabric FX, including ABS, PC/ABS, PB, and unfilled or talc-filled PP • There is no limitation on the graining that can be used; the fabric effect will differ depending on the grain effect engraved in the tool • If parts are extruded or a mold is not engraved, final parts will have an attractive speckled appearance, but will not be textured TYPICAL USES Fabric FX concentrates are suitable for any application that could benefit from an enhanced textile-like appearance.

Working together to understand the unique requirements for the company’s conveyor application, the engineering team at Avient developed customized flat springs that provide more consistent quality and longer fatigue life than the original components, improving conveyor performance and longevity. THE IMPACT Not only did the Gordon Composites vibratory springs outperform the company’s originally specified spring components, they provided a number of additional benefits: Ready-to-install springs reduced labor and simplified installation Unlike alternative springs, Gordon Composites springs are factory machined to the required size and pre- drilled for a significant reduction in cutting and drilling processes and allowing valuable labor time to be allocated elsewhere.

View original content to download multimedia:http://www.prnewswire.com/news-releases/avient-announces-tenth-consecutive-annual-increase-in-quarterly-dividend-301152673.html