This instrument measures the depth of penetration from zero to 0.100 inches.

With long fiber reinforced solutions, the individual reinforcing fibers within each pellet are aligned parallel to each other and are exactly as long (usually 1/2 inch or 12 mm) as the pellet due to the unidirectional orientation of the fiber prior to pellet chopping.

Special TPEs can achieve up to 40 inches at an injection speed of 5 in/sec.

Units are typically given in pounds per square inch (psi) or megaPascals (MPa). The instrument measures the depth penetration from zero to 0.100 inches. While usually only in the thousandths of an inch per inch range, shrinkage can dramatically affect the molding and removal of the part as well as the appearance of the final part.

Units are typically given in pounds per square inch (psi) or megaPascals (MPa). The instrument measures the depth penetration from zero to 0.100 inches. While usually only in the thousandths of an inch per inch range, shrinkage can dramatically affect the molding and removal of the part as well as the appearance of the final part.

STAN-TONE HCC- #24 GREY VORE-F STAN-TONE HCC- #24 GREY STR2-F STAN-TONE HCC- #24 GREY VOF2-F

The barrel temperature of the injection molding machine was set from 180°C to 220°C (360°F to 430°F) and the injection velocity from 0.7 inch/sec to 2.0 inch/sec.

CLEVELAND – June 24, 2021 – Avient today announced the launch of two new grades within its next-generation Barricade™ elastomers product line th June 24, 2021

CLEVELAND – June 24, 2020 – PolyOne today launched OnColor™ WC Choice, a new line of cost-effective colorants that reliably achieve the per June 24, 2020

– June 24, 2014 – PolyOne GLS Thermoplastic Elastomers, a global leader in high-performance, custom-formulated thermoplastic elastom June 24, 2014