KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified manufacturing sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Standard concentrates in a PE carrier and on request in PP • Pre-colored formulations can be supplied in specific resins selected for the application REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN DRUG TYPE COLOR DESCRIPTION PANTONE REFERENCE AVIENT PRODUCT CODE PE BASED Adrenergic agonist combinations Light Green 373 C PE6M176349 Adrenergic agonists Purple 2583 C PE4M176057 Anti-infectives Tan 467 C PE8M176130 Anti-inflammatory, nonsteroidal Grey Cool Grey 4 C PE7M176184 steroids Pink 197 C PE3M176237 Anti-inflammatory, immunomodulators Olive Green 5763 C On request Beta-blockers Yellow Yellow C PE1M176160 Beta-blocker combinations Dark Blue 281 C PE5M176272 Carbonic anhydrase inhibitors Orange 1585 C PE2M176089 Cytotoxic Black 6 C PL9M176008 Miotics Dark Green 348 C PE6M176267 Mydriatics and cycloplegics Red 1797 C PE3M176236 Prostaglandin analogues Turquoise 326 C PE5M176273 Healthcare use limitations apply—see below. Processing conditions can cause material properties to shift from the values stated in the information. It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

VERSAFLEX™ VDT 4202-40B DYNAFLEX™ G7940-1 Application Anti-Vibration Feet Anti-Vibration Feet Defining Characteristic Vibration Damping Good Processability Compression Set Low Compression Set Low Compression Set Tactile Feel Grippy Feel Soft Touch, Rubbery Feel Coloring Black Natural Hardness 40 Shore A 40 Shore A Processing Injection Molding Injection Molding Overmolding Substrate Polypropylene Polypropylene HOW GLS TPEs MAKE THE DIFFERENCE IN HOME APPLIANCE ANTI-VIBRATION FEET • Reduced appliance movement and noise – vibration damping technology reduces movement and noise of the appliance when in use • Resistance to wear and tear – TPEs are proven to maintain their shape and resist tears with low compression set • Better performance and function – increase design freedom with material selection flexibility • Improved processability – boost efficiency with injection molding processing and reduce overall production cycle time and costs • Reduced number of part defects – eliminate secondary operations to achieve consistent and controlled results To learn more about GLS TPEs home appliances, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368). Processing conditions can cause material properties to shift from the values stated in the information. Processing conditions can cause material properties to shift from the values stated in the information.

Consider combining comfort with color and performance properties using enhanced soft touch GLS™ TPE materials for even better results. A few grams of a TPE material can often make a major difference in the perceived quality of an item. Processing conditions can cause material properties to shift from the values stated in the information.

reporting  companies  that   manufacture  products  (or  have  others  manufacture  products)  that  contain  3TG  metals  or  their  derivatives   (tantalum,  tin,  tungsten  and  gold)  that  are  necessary  to  product  functionality  or  production  are  required  to  assess   their  supply  chains  and  report  to  the  SEC  on  whether  those  materials  are  sourced  from  the  Democratic  Republic  of   Congo  and  adjoining  countries.       Consistent  with  this  commitment,  our  business  objective  is  to  use  conflict  free  materials  and  components  in  our   products.      

Reinforce all panel seams with a minimum 4 inch (10.16 cm ) batten of additional ballistic panel material. Property GlasArmor Panel ThermoBallistic Panel Test Method Glass Content 55 wt% 73 wt% Density 0.066 lb/in3 1.83 g/cm3 0.062 lb/in3 1.72 g/cm3 ASTM D-792 Flex Mod 2.1–2.7 msi 14.5 - 18.6 GPa 2.5 msi 17.2 GPa ASTM D-790 Flex Strength 65 ksi 448 MPa 14 ksi 96.5 MPa ASTM D-790 Barcol Hardness 50–60 n/a ASTM D-2583 Fire Rating 1 hour1 n/a ASTM E-119-09c Flame Spread Rating 452 n/a ASTM E-84-08a Smoke Developed Rating 1652 n/a ASTM E-84-08a MATERIAL DATA (TYPICAL VALUES) 1 UL Level 3 panel was fire tested as part of a wall system with steel studs and drywall face sheet 2 NFPA & IBC Class B rating achieved www.avient.com Copyright © 2023, Avient Corporation. Processing conditions can cause material properties to shift from the values stated in the information.

Any samples or developmental material provided by Seller are provided “AS IS” with no warranty as to its performance and such samples or materials shall not create any warranty by sample, which is hereby waived. Seller has no liability for the failure of discharge or unloading equipment or materials used by Buyer, whether or not supplied by Seller. 12. Buyer shall not use Seller’s name or trademarks in any advertisements, product descriptions, packaging materials, websites, or any other promotional materials, except with the prior written consent of Seller. 18.

Buyer expressly agrees that the colour is subject to deviations which are caused by the nature of the material and is not covered by this warranty. Seller has no liability for the failure in discharging or unloading equipment or materials used by Buyer, whether or not supplied by Seller. In the event of a force majeure, Seller has no obligation to purchase material from third parties for resale to Buyer, nor will Seller bear liability for any costs increases suffered by Buyer in purchasing substitute material from a third party. 14.

Patterson Please refer to the accompanying materials for voting instructions. M&A remains a key component of maintaining material science competitiveness that can enable our customers’ sustainability goals and in turn drive performance at PolyOne. These and other projects benefit the planet by minimizing the amount of natural resources required to safely manufacture, transport and ensure first-time quality material to our customers.

Seller has no liability for the failure of discharge or unloading equipment or materials used by Buyer, whether or not supplied by Seller. Buyer acknowledges that Seller has furnished to Buyer Material Safety Data sheets, which include warnings together with safety and health information concerning the Product and/or the containers for such Product. 10. O Comprador reconhece que o Vendedor forneceu ao Comprador Material de Segurança, o qual inclui avisos juntamente com informações sobre segurança e saúde relativas ao Produto e/ou aos containers de tal Produto.

Level of Assurance and Qualifications:  Limited  This verification used a materiality threshold of ±5% for aggregate errors in sampled data for each of the above indicators GHG Verification Methodology: Evidence-gathering procedures included, but were not limited to:  Interviews with relevant personnel of Avient and their consultant;  Review of documentary evidence produced by Avient;  Review of Avient data and information systems and methodology for collection, aggregation, analysis and review of information used to determine GHG emissions; and  Audit of sample of data used by Avient to determine GHG emissions. Verification Opinion: Based on the verification process and procedures conducted to a limited assurance level of the GHG emissions statement shown above, Apex found no evidence that the GHG emissions statement:  is not materially correct and is not a fair representation of the GHG emissions data and information; and  has not been prepared in accordance with the WRI/WBCSD GHG Protocol Corporate Accounting and Reporting Standard (Scope 1 and 2), and WRI/WBCSD Greenhouse Gas Protocol Corporate Value Chain Accounting and Reporting Standard (Scope 3).