Get Help Now +1-866-737-2066 ECCOH™ 5865/1 Formulations Avient Wire & Cable Industry Bulletin

EXTRUDER Screw 3/4" to 6" Polyethylene type—Single flight, no mixing section, 1.5–2:1 compression ratio Tooling Semi-Pressure type: 30°–40° angle Die On size with 1/8" or less land L/D 24:1 recommended Screen Pack No screen pack (Optional depending on pressure) Cooling Trough 120–150°F (50–65°C) recommended Feeder Gravimetric type preferred—3 compartment for cross-linked Dryer Desiccant type, 4 hours at 160°F (70°C) For ECCOH™ compound only; never put Dry Silane in Dryers PROCESSING Temperature ECCOH 5000 Series ECCOH 6000 Series Wire Preheat 180–250°F (80–120°C) 180–250°F (80–120°C) Feed Zones 200°F (93°C) 275°F (135°C) Transition 275°F (135°C) 325°F (163°C) Metering 300°F (150°C) 375°F (190°C) Head/Die 330°F (165°C) 420°F (215°C) Target Melt 330–340°F (165–170°C) 420–440°F (215–225°C) Flame at Die Tip Yes—as needed Line Speed Shear sensitive: Observe Melt Temperature, Motor Amperage, and Pressure Purge Compound HDPE Copyright © 2020, Avient Corporation. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the information or products reflected by the information.

Avient and Hexagon used Digimat to develop anisotropic long fibre material data for a molded connector rod. The resulting tensile test data shown in Figure 1 gives an indication of the variation in material response that can be observed as a function of the fibre orientations. In reality, the material response can fall anywhere between the curves shown in Figure 1.

Rubryka 6 ­ Sposób powstania spółki Rubryka 7 ­ Dane wspólników Strona 2 z 8 1 1.Nazwisko / Nazwa lub firma AVIENT SWITZERLAND GMBH 2.Imiona ***** 3.Numer PESEL/REGON --- 4.Numer KRS ---------- 5.Posiadane przez wspólnika udziały 58.000 UDZIAŁÓW O ŁĄCZNEJ WARTOŚCI 29.000.000,00 ZŁ 6.Czy wspólnik posiada całość udziałów spółki? W TRYBIE ART. 492 § 1 PKT 1 KSH, TJ. Z O.O) - ART. 515 § 1 KSH.

1.

1.

1.

Contact Avient for more information. Reference to them does not indicate any affiliation with or endorsement by them. 1 surface sanded with 220 grit scuff prep 2 surface primed with 459T For more information on installation, adhesives, and fasteners for specific applications, please contact Avient. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application.

EXTRUDER Screw 1" to 6" deep flighted metering screw 3:1 compression ratio Tooling Tubing type – zero land (for smaller sizes) Pressure type – for 1" size or larger Die Tubing type – low DDR Pressure type – short land L/D 24:1 or higher Screen Pack 20/40/20 Mesh Cooling Trough 120–150 °F (50–65 °C) recommended Dryer Hot air or desiccant type, 4 hours at 175–185 °F PROCESSING Temperature Wire Preheat None Feed Zones 290–300 °F Transition 320–340 °F Metering 340–350 °F Head/Die 350–365 °F Target Melt 350–365 °F Maximum Melt 390 °F Purge Compound HDPE www.avient.com Copyright © 2020, Avient Corporation. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. www.avient.com Copyright © 2020, Avient Corporation.

© 2021 Avient Corporation. REFERENCES [1] S. Biotechnol. 2021, 9, 1. [27] R.