1.

Shots Composite Panel Nominal Thickness Nominal Weight Level 1 9mm full metal copper jacket with lead core 1175 ft/sec 358 m/sec 3 GlasArmor™ Level 1 0.256 in 6.5 mm 2.7 lb/ft2 13.2 kg/m2 Level 2 .357 magnum jacketed head soft point 1250 ft/sec 381 m/sec 3 GlasArmor™ Level 2 0.384 in 9.8 mm 4.0 lb/ft2 19.5 kg/m2 .44 magnum lead semi-wadcutter gas checked 1350 ft/sec 411 m/sec 3 GlasArmor™ Level 3 0.500 in 12.7 mm 5.2 lb/ft2 26.4 kg/m2 ThermoBallistic™ Level 3 0.440 in 11.2 mm 3.9 lb/ft2 19.0 kg/m2 PR OT EC TI O N L EV EL S Level 4–8: Customized solutions available, contact Avient to learn more. Characteristic GlasArmor Thermoset Panels ThermoBallistic Thermoplastic Panels Steel Concrete Performance-to-Weight            Bullet Resistance – Pistols           Bullet Resistance – Rifles    NA1     Temperature Performance        2         UV Resistance       3         Electrical Conductivity              Flame Retardance    5   4         Ease of Installation             1 Ballistic resistance to rifle fire can be achieved by layering ThermoBallistic and GlasArmor panels – contact Avient 2 ThermoBallistic panels made with polypropylene resin systems 3 UV resistance is achieved using surface polymeric films 4 Flame retardant additives can be incorporated upon request under some circumstances 5 Fire rated for 1-hour per ASTM E-119-09c when tested in an interior wall system Compare the different materials used for ballistic protection https://go.avient.com/BallisticProtection? gl=1*qdsy99*_ga*NjU3OTY5NDk3LjE3MzEzMzIyODg.

Avient makes no representations, guarantees, or warranties of any kind with respect to the information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the information. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the information or products reflected by the information.

Avient offers complete and flexible solutions to fulfill technical requirements and local standards. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. Contact your Avient sales representative for product guidance from our experts.

PRODUCT BULLETIN PROPERTY COMPARISON TRILLIANT HC VS NYLON Flexural Tensile — PKE-GF PA12-GF PA612-GF Shrink Modulus Chemical Resistance Flexural Tensile (Dry)Tensile CO2 Emission Factor — Trilliant HC — PA6-GF — PA66-GF Wear 1: Poor 3: Good 5: Excellent Flexural Tensile — PKE-GF PA12-GF PA612-GF Shrink Modulus Chemical Resistance Flexural Tensile (Dry)Tensile CO2 Emission Factor — Trilliant HC — PA6-GF — PA66-GF Wear 1: Poor 3: Good 5: Excellent 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the information or products reflected by the information.

Avient’s Versaflex™ CE non-blooming TPEs are specifically formulated to overcome the challenge of surface blooms when overmolding consumer electronics. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. TEST METHODS Stain Test - Condition 1: Tea, coffee, ketchup, mustard stand on the surface for 2 minutes at room temperature, then removed to observe the surface performance.

TEST METHOD Fifteen bars of each material were placed into jigs at 1% and 2% strain. This procedure was completed by placing one 1/2 inch section of rayon gauze at the apex of each bar, and soaking the gauze with the disinfectant to saturate the material. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application.

February 1, 2018 Feb. 1, 2018 9:00 a.m. to 1:00 p.m.

Integrated EMI/RFI shielding – Stat-Tech material has integrated EMI/RFI shielding to prevent crosstalk between components, with effectiveness up to 70 dB (10GHz, 1/8" thickness). www.avient.com Copyright © 2020, Avient Corporation. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application.

Avient makes no representations, guarantees, or warranties of any kind with respect to the information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the information. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the information or products reflected by the information.