At the time, the boot was injection molded from acrylonitrile-ethylene-styrene (AES) as a standalone part and assembled to the housing separately.

Such advice, for example how to set up blow molding machines, is not equipment specific and therefore ColorMatrix would always recommend using local or expert technicians in addition to following best practice points listed below; • Preforms should be conditioned for minimum 24 hours prior to blowing • Preforms should always be used in a FIFO manner (First In, First Out) • Octabins of preforms should be segregated and blown per resin type, i.e. not mixed with other resins • A preform traceability system should be in place such that any process upsets can be quickly followed up and corrected • Enhanced QC preform checking resources for bottle distribution, aesthetics and integrity should be on-hand during the performance optimization trials • Prior to any process optimization, the blowing machine performance should be verified as being within normal i.e. accepted standard ranges and all important components and control features are working satisfactorily. It should be recognized that due to this complexity, achieving consistent blowing performance could be regarded more of an art than a science and a high degree of technical competence, rigorous maintenance, thorough operative training and constant vigilance during operation should always be exercised.

Chemical Resistance to Organic Solvent: Degrades moderately in Carbon Tetrachloride and Ethylene Glycol/Water. Over the last several years, FIBER-LINE® and DuPont™ have formed a strong partnership based upon the synergies between both organizations

You are advised to consult any further disclosures we make on related subjects in our reports on Form 10-Q, 8-K and 10-K that we provide to the Securities and Exchange Commission. Reduce Scope 1 & 2 greenhouse gas emissions by 60% by 2030, and operations carbon neutral by 2050. Whether an additional line at an existing manufacturing plant, or a new facility in a growing region, we ramp-up quickly and cost-efficiently.

Fully customizable, OnColor Naturals includes a range of colorants made with natural pigments derived from plants, flowers, roots and minerals. Mineral and botanical pigments can be mixed together to adjust color tones, with plant-based pigments enabling vivid color and mineral pigments helping achieve calm and earthy tones.

Gravi-Tech™ BIO bio-based formulations are density modified engineered polymers that contain partially bio-based resin from renewable plant sources. Formulated with partially bio-based resin from renewable plant sources

Fluorinated ethylene propylene (FEP) is a preferred material for cable jacketing or insulation of a conductor, and often needs to be marked.

At the time, the boot was injection molded from acrylonitrile-ethylene-styrene (AES) as a standalone part and assembled to the housing separately.

CLEVELAND – June 13, 2022 – Avient Corporation, a premier provider of specialized and sustainable material solutions and services, today announced the availability of Colorant Chromatics™ UV Laser Marking technology for use in high performance fluorinated ethylene propylene (FEP) wire and cable applications for the aerospace industry.

At the time, the boot was injection molded from acrylonitrile-ethylene-styrene (AES) as a standalone part and assembled to the housing separately.