You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. TECHNICAL PROPERTIES(1) TEST METHOD Edgetek™ ET8900-0011 HI UV NAT Edgetek™ ET8900-0012 HI UV White Edgetek™ ET8900-0013 HI UV Black Physical Density/Specific Gravity ASTM D792 1.13 g/cm3 1.15 g/cm3 1.13 g/cm3 Molding Shrinkage - Flow ASTM D955 1.4–2% 1.4–2% 1.4–2% Mechanical Tensile Strength (Yield) ASTM D638 5,900 psi 5,800 psi 5,800 psi Tensile Modulus(2) ASTM D638 169,000 psi 161,087 psi 176,000 psi Flexural Modulus(3) ASTM D790 187,000 psi 190,985 psi 188,000 psi Impact Notched Izod Impact 73°F (23°C), 0.125 in ASTM D256A 17.3 ft-lb/in 16.5 ft-lb/in 16.5 ft-lb/in Notched Izod Impact -22°F (-30°C), 0.125 in ASTM D256A 3.2 ft-lb/in 3.0 ft-lb/in 3.3 ft-lb/in Thermal (HDT) 66 psi (0.45 MPa), 0.125 in ASTM D648 121°C 135°C 129°C NORTH AMERICA GRADES (1) Data based on single lot of lab generated samples.

You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com System Syncure XLPE S200FH Syncure XLPE S200FV Applications Building Wire, Tray Cable, Service Entrance Building Wire, Tray Cable, Service Entrance Specification UL 44 UL 44 Wire Type RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 Components 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Features Horizontal Flame, DBDPE-free VW-1, DBDPE-free General Properties Specific Gravity (g/cm3) 1.01 1.31 Hardness Shore D, 10sec 47 48 Gel % 68 70 Tensile Properties Tensile Strength (psi) 2800 3200 Elongation % 400 470 Tensile Retention % 95 100 Elongation Retention % 90 93 Electrical Dielectric Strength (V/mil) 1000 1200 Dielectric Constant 2.31 2.61 Dissipation Factor % 0.0012 0.0043 Thermal Temperature Rating °C 90 90 Heat Deformation % 10 5 TECHNICAL PROPERTIES

LubriOne PKE formulations also offer improved chemical resistance and thermal performance, plus reduced flammability, over POM You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

This laser enhancement additive works by converting visible, UV or IR laser light energy into thermal energy, creating surface marks that contrast the color of resin material. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

CESA Light with UVA present absorbs the harmful UV radiation and dissipates it as harmless thermal energy. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Its portfolio of OnColor™ polymer colorants was developed to improve the heat and long-term color stability of cautionary orange polymers for high-voltage EV connectors, offering the following benefits: • Long-term fading resistance in thermal aging tests at up to 130°C for 1,000 hours, • No migration, excellent processing stability • Lower corrosion risk vs. typical comparable colorants • No impact on flame retardancy and limited adverse effects on essential mechanical characteristics, including flexural and impact strength Avient’s orange nylon colorants are available in several validated RAL, Pantone, and JPMA orange shades for compounding, injection molding, and extrusion. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Low and stable εr • Ultra-low loss • Low water absorption • Hydrolysis resistant • Excellent impact strength • Mass production friendly APPLICATION BULLETIN A PREPERM radome grade gives you a longer and wider scanning range compared to common resins. 40 m Comparison of PREPERM radome grade and common resin at 24 GHz and 79 GHz bands Common Resin Common Resin PREPERM™ RB260 PREPERM™ RB260 PARAMETER PBT+GF PEI PREPERM RADOME GRADE ELECTRICAL εr @ 77 GHz 3.5–4.2 3.1 2.6 Tan @ 77 GHz 0.03 0.003 0.003 Isotropic @ 77 GHz No Yes Yes MECHANICAL Impact strength -20°C/+23°C notched izod 6kJ/m2/6kJ/m2 6kJ/m2/6kJ/m2 25kJ/m2/35kJ/m2 Elongation @ break 3% 40% 22% Brittleness Yes Yes No THERMAL Max use temp (HDT) 200–220°C 190–200°C 150–180°C Inherent flammability HB V0 V1 to V0 ENVIRONMENTAL Water absorption 0.4% 1.25% 0.2% Chemical resistance Good Excellent Good Hydrolysis resistant Specific Grade Yes Yes MANUFACTURING Batch-to-batch consistency Limited Excellent Excellent Moldability Excellent Good Good Abrasive Yes No No Mold shrinkage Inconsistent, warpage issue Homogenous Homogenous Raw material price Low High Moderate Copyright © 2022, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

MEVOPUR COLORANTS • Standard colors in PP and PE to shorten time-to-market • Custom colors matched to Pantone, RAL or other color reference • White colorants for pharmaceutical packaging for LDPE, HDPE and PP with opacity to reach USP chapter MEVOPUR FUNCTIONAL ADDITIVES • Antistatic formulation with good flow/impact for injection molding • Amide- and amine-free antistatic for film in contact with API (Active Pharmaceutical Ingredients) • UV blocking for transparent PP and PE packaging to meet USP chapter • Non-migrating friction reduction/processing aid for PE and PP • Laser marking/welding additive for fast, reliable marking/assembly • MVTR (Moisture Vapor Transmission Rate) reduction for HDPE to improve shelf-life • Thermal protection of the polymer during processing • Gamma/e-beam sterilization protection for PP (up to 50kGy) with color compensation for reduced yellowing REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request Bormed™ is a registered trademark of Borealis Healthcare use limitations apply—see below. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

KEY CHARACTERISTICS • Excellent impact resistance • Lightweight without compromising durability • UV and thermal stability • Ability to withstand harsh conditions • Resistance to rot and rust • Simplified manufacturing processes • Customizable material choice and appearance Ready to make the switch? You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

BENEFITS • Structural reinforcement • Weight reduction • Metal replacement • Vibration damping • Soft touch • Customization & performance improvement • Thermal management • Lead replacement • Biodegradable custom colors • Carbon/glass composites • Ballistic resistance 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.