Rapid Color Prototyping Technology OnColor™ HC Colorants used to streamline color development and production of dental floss containers Guide to overmolding material selection, part and mold design, material handling and preparation, TPE injection molding, processing, maximizing adhesion and troubleshooting for GLS™ TPEs

Off the Shelf Colors, Black, White, Mixing Base Black, White, Gold, Mixing Base Vinyl Powder Coating and Dip Molding

Colorant Chromatics™ Evoluscend™ Non-PFAS High-Temperature Mold Release Additive Colorant Chromatics™ Evoluscend™ Non-PFAS High-Temperature Mold Release Additive Vinyl Powder Coating and Dip Molding

Gasoline - 30% glass-filled (GF) grade, dry as molded (DAM), room temperature Testing methodology is an adaptation from ASTM D543 • Reapply freshly soaked gauze pad every 24 hours to prevent from drying out • Repeat for a total of 72 hours • Tensile properties recorded *Chemical resistance data for DEET, motor oil, glass cleaner, and sunscreen available upon request KEY CHARACTERISTICS Figure 1 Figure 2 3.34 3.84 3.63 1.96 2.21 0.99 3.43 3.86 3.93 1.76 3.49 2.01 3.26 3.66 3.74 1.45 1.06 0.989 2.98 3.99 3.41 1.41 1.07 0.88 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 30% LGF PKE 30% LGF PA6 30% LGF PA66 30% SGF PKE 30% SGF PA6 30% SGF PA66 Ft -lb /in Notched Izod Impact ASTM D256 23C DAM 23C Conditioned -40C DAM -40C Conditioned 1.47 1.37 1.37 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Glass-Filled PKE Glass-Filled PA6 Glass-Filled PA66 g/ cm 3 Density of Polyketone vs Nylon ASTM D792 LESS MOISTURE ABSORPTION THAN NYLON 30% Short Glass Fiber (SGF) Comparison Moisture uptake, environmental chamber 62% RH, 70°C SIMILAR DENSITY TO NYLON ASTM D792 COMPARABLE AND CONSISTENT IMPACT PERFORMANCE* Notched Izod Impact (ASTM D256) of LGF and SGF for DAM and Conditioned Materials *3,000 hr weathering data available upon request KEY CHARACTERISTICS 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation. Edgetek™ PKE Glass-Filled Portfolio Polyketone formulations with 20, 30, or 40% short glass fiber reinforcement available in natural or black Complēt™ PKE Portfolio Long fiber reinforced polyketone formulations with 30, 40, or 50% fiber loading and available in natural or black, and available in non-PFAS* formulations to achieve a UL 94 V-0 flame rating at 1.5 mm ET8900-0001 20GF NAT LGF30-PKE 1088 NAT ET8900-0002 30GF NAT LGF30-PKE 2020 BLK ET8900-0003 40GF NAT LGF40-PKE 1088 NAT ET8900-0004 20GF BLK LGF40-PKE 2020 BLK ET8900-0005 30GF BLK LGF50-PKE 1088 NAT ET8900-0006 40GF BLK LGF50-PKE 2020 BLK FEATURED PRODUCTS * Non-PFAS flame-retardant (FR) grades are manufactured without intentionally added PFAS-based raw materials.

conventional technology, moving toward carbon- negative OnColor™ REC Polymer Colorants KEY REQUIREMENTS WHY AVIENT? AVIENT SOLUTION SUSTAINABILITY + COLOR STABILITY LEARN MORE © 2024, Avient Corporation, All Rights Reserved. https://www.avient.com/products/polymer-colorants/solid-color-masterbatches/oncolor-rc-environmental-black-color-concentrate

In addition, manufacturers of beauty and personal care packaging often require materials that are clear or brightly colored to attract consumer attention. Bottles: TPEs can enhance the interaction between package and consumer in coextruded blow molding. GLS and Kautex Machines, a leader in extrusion blow-molding equipment, jointly developed a solution for co-extruding an ultra-thin outer layer of translucent, customized Dynalloy™ TPE onto recycled or virgin HDPE resin.

In addition, manufacturers of beauty and personal care packaging often require materials that are clear or brightly colored to attract consumer attention. Bottles: TPEs can enhance the interaction between package and consumer in coextruded blow molding. GLS and Kautex Machines, a leader in extrusion blow-molding equipment, jointly developed a solution for co-extruding an ultra-thin outer layer of translucent, customized Dynalloy™ TPE onto recycled or virgin HDPE resin.

GLS™ TPEs - Injection Molding Guide Guide to overmolding material selection, part and mold design, material handling and preparation, TPE injection molding, processing, maximizing adhesion and troubleshooting for GLS™ TPEs Making the Most of Color: Smart Colorants™

Polymer Colorants Reusable concentrates significantly reduce time spent cleaning extrusion and injection molding equipment. Color Masterbatches: OnColor™

The tub features a custom overmolded GLS Versaflex™ thermoplastic elastomer (TPE) and non-toxic PolyOne OnColor™ colorants. Designers chose Versaflex TPE to mold the folding portion of the tub and provide a non-slip surface on the bottom of the tub legs. EDITORS: For a high-resolution image, please click here: Karibu™ Folding Baby Bath Image courtesy of Karibu Image Caption: Versaflex™ TPE is used to mold the folding tub and provide a non-slip surface for the legs of the tub.