N95 and surgical masks both rely on multi-layer construction, with a middle layer made from melt-blown non-woven material. Media contact Media Relations Contacts

For packaging tier suppliers and converters, extrusion blow molding is a popular process due to low tool and die cost, fast production rates and ability to mold complex parts. Flow Lines: near gate points, compromise appearance and aesthetics   To discuss your specific project, contact us here.

Melt The screw position should be noted and used to set the transfer point. Melt Temperature

Colorant Chromatics color concentrates and pre-colored solutions are based on resins from the world’s leading suppliers. Glass fiber and glass beads formulations are typically used for injection molding processes where improved dimensional stability is required. In order to extrude PTFE-insulated wire and tubing, a lubricant (normally naphtha) must be blended with the PTFE fine powder.

The technology also allows several injection points on a single spinning line, so that multiple colors can be produced at the same time. Media contacts Jennifer Huang Sr. Media Relations Contacts

This breakthrough technology combines advanced liquid concentrates with state-of-the-art, high-pressure metering equipment to enable late-stage injection of liquid color or additive into the polymer melt during spin-dyeing. The injection takes place between the end of the extruder, or melt-pipe, and the spin head. Multiple color productions – several injection points possible on a single extruder​

Edgetek™ PKE SPECIALTY ENGINEERED POLYKETONE FORMULATIONS PROCESSING GUIDE EDGETEK™ PKE POLYKETONE FORMULATIONS Injection Molding Parameters The barrel temperatures below should be used as a reference point. Actual melt temperatures should be measured using a pyrometer to ensure consistent and accurate processing. The Edgetek™ ET8900 Series consists of glass-filled and high impact specialty engineered polyketone (PK) thermoplastics.

Gordon Glass™ Archery Bow Limbs Long Glass Fiber Reinforcement Vinyl Powder Coating and Dip Molding

Melt too cold Low melt temperature Increase the stiffness of the substrate by including glass or increasing thickness of ribs