POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. TYPICAL PROPERTIES - MULTI-AXIAL LAMINATES 0° Testing Orientation 90° Testing Orientation Product Name Resin Fiber Content Laminate Layers & Orientation Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0/90 0.20 29.49 1000 0.031 0.79 - - - - 2020 13.9 59.7 412 - - - - 2020 13.9 59.7 412 0/90/0 0.31 44.24 1500 0.045 1.14 2250 15.5 46.4 320 3070 21.2 79.4 547 186 1.3 9.7 67 1330 9.2 39.6 273 0/90/90/0 0.41 58.98 2000 0.057 1.45 2000 13.8 44.0 303 2400 16.5 60.6 418 496 3.4 20.7 143 2210 15.2 56.4 389 6531 65 0/90 0.10 14.80 502 0.014 0.36 - - - - 2240 15.4 60.9 420 - - - - 2240 15.4 60.9 420 0/90/0 0.15 22.20 753 0.020 0.50 2650 18.3 58.3 402 3100 21.4 82.8 571 280 1.9 NB2 NB2 1670 11.5 42.5 293 0/90/90/0 0.21 29.61 1004 0.027 0.68 2260 15.6 51.5 355 2470 17.0 62.2 429 580 4.0 30.4 210 2310 15.9 59.6 411 6536 0/90 0.14 20.71 702 0.021 0.53 - - - - 1980 13.7 60.5 417 - - - - 1980 13.7 60.5 417 0/90/0 0.22 31.06 1053 0.029 0.74 2309 15.9 48.3 333 2730 18.8 81.5 562 245 1.7 13.0 90 1490 10.3 44.3 305 0/90/90/0 0.29 41.41 1404 0.037 0.94 2164 14.9 47 324 2170 15.0 59.6 411 512 3.5 25.4 175 2340 16.1 71.2 491 6538 0/90 0.27 39.54 1341 0.034 0.86 - - - - 2220 15.3 60.0 414 - - - - 2220 15.3 60.0 414 0/90/0 0.41 59.53 2018 0.057 1.44 2825 19.5 40.9 282 2780 19.2 67.6 466 218 1.5 10.2 70 1410 9.7 40.0 276 0/90/90/0 0.55 79.37 2691 0.073 1.85 1880 13.0 32.4 223 2060 14.2 54.0 372 478 3.3 18.0 124 2360 16.3 61.0 421 7034B PP-Black 70 0/90 0.14 20.48 694 0.016 0.40 - - - - 2680 18.5 62.0 427 - - - - 2680 18.5 62.0 427 0/90/0 0.21 30.72 1041 0.028 0.71 1750 12.1 55.9 385 3710 25.6 75.1 518 160 1.1 11.3 78 1440 9.9 36.2 250 0/90/90/0 0.28 40.95 1388 0.036 0.90 1700 11.7 40.4 279 2800 19.3 55.7 384 432 3.0 25.4 175 2350 16.2 52.4 361 6020 PE 60 0/90 0.17 23.90 810 0.023 0.57 - - - - 1830 12.6 52.00 359 - - - - 1830 12.6 52.0 359 0/90/0 0.25 35.86 1216 0.033 0.84 2265 15.6 40.0 276 2740 18.9 68.2 470 181 1.2 10.0 69 1350 9.3 35.3 243 0/90/90/0 0.33 47.81 1621 0.044 1.12 1810 12.5 30.0 207 2000 13.8 48.0 331 502 3.5 22.0 152 1820 12.5 46.0 317 6621 66 0/90 0.19 27.94 947 0.025 0.65 - - - - 2280 15.7 60.0 414 - - - - 2280 15.7 60.0 414 0/90/0 0.29 41.90 1421 0.040 1.01 2490 17.2 37.0 255 2900 20.0 70.0 483 165 1.1 9.7 67 1440 9.9 38.0 262 0/90/90/0 0.39 55.87 1894 0.053 1.35 1810 12.5 29.0 200 2160 14.9 58.0 400 508 3.5 21.0 145 2170 15.0 53.0 365 5843 PETG 58 0/90 0.16 23.70 804 0.020 0.50 - - - - 2050 14.1 59.6 411 - - - - 2050 14.1 59.6 411 0/90/0 0.25 35.55 1205 0.030 0.76 2800 19.3 89.0 614 2900 20.0 78.0 538 397 2.7 NB2 NB2 1580 10.9 42.5 293 0/90/90/0 0.33 47.40 1607 0.039 0.99 2540 17.5 72.0 496 2300 15.9 57.7 398 780 5.4 35.0 241 2170 15.0 63.0 434 5840B aPET-Black 58 0/90 0.18 26.01 882 0.021 0.53 - - - - 2530 17.4 55.3 381 - - - - 2530 17.4 55.3 381 0/90/0 0.27 39.01 1323 0.032 0.82 2986 20.6 91.1 628 3160 21.8 68.7 474 252 1.7 20.0 138 1580 10.9 36.9 254 0/90/90/0 0.36 52.01 1763 0.042 1.07 3065 21.1 73.1 504 2570 17.7 54.2 374 813 5.6 37.0 255 2440 16.8 55.6 383 5860B PA6-Black 58 0/90 0.16 22.95 778 0.021 0.52 - - - - 2190 15.1 56.00 386 - - - - 2190 15.1 56.0 386 0/90/0 0.24 34.43 1167 0.034 0.86 2510 17.3 117.0 807 2760 19.0 63.7 439 657 4.5 22.2 153 1630 11.2 39.7 274 0/90/90/0 0.32 45.91 1556 0.046 1.18 2210 15.2 106.0 731 2090 14.4 45.6 314 1110 7.7 50.8 350 2150 14.8 57.4 396 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables.

POWER & LIGHTING MANUFACTURER/MOLDER S M A L L C A B L E R E E L • Meet color requirement of medium-tone gray for polypropylene (PP) cable reel application • Low cost color development • Short lead time to fit production schedule • Offered readily available standard color (Mid Grey – OC7UFF) to meet customer request • Provided low usage rate of 1% LDR to keep costs down • Shipped colorant sample within one day of inquiry • Allowed sample parts to be molded within three days to accommodate schedule Omnicolor™ Multipurpose Colorants KEY REQUIREMENTS WHY AVIENT?

AUTOMOTIVE OEM L O W E R E X T E R I O R B U M P E R • Develop a new color for molded-in-color plastics • Create ‘Wow’ effect without chroming or paint • Provide metallic aspect with good UV resistance for exterior part • Developed new “gris megalithe” color for PP (AS1) utilizing Avient Design center • Produced master plaques to showcase new color • Accelerated testing to certify outstanding weathering resistance • Collaborated across the supply chain to optimize metallic effect in the final part Smartbatch™ Combination Colorants & Additives KEY REQUIREMENTS WHY AVIENT?

HEALTHCARE DEVICE MANUFACTURER W E B K N E E B R A C E • Good bonding to polypropylene (PP) • Flexible and soft-touch feel • Skin contact, general FDA compliance • Good tensile strength and resilience • Excellent colorability • Offered material that passed the required FDA regulations • Provided high elasticity memory and ultra soft tactile finish to meet the comfort and pleasant surface feeling requirements • Delivered TPE with easy and stable processing and colorability DynaflexTM Thermoplastics Elastomer KEY REQUIREMENTS WHY AVIENT?

AUTOMOTIVE COMPONENTS MANUFACTURER O U T S I D E R E A R - V I E W M I R R O R G A S K E T • Black materials with hardness 60 and shore A • UV Stabilized • Overmouldable on to PP • ROHS Compliant • Customer specified material • Utilized global reach to translate customer approved solution from Europe to India • Reduced development time as material was already qualified in Europe • Reduced import/export costs • Enabled Indian business to specify Avient as a preferred supplier Custom GLS™ Thermoplastic Elastomer KEY REQUIREMENTS WHY AVIENT?

EUROPEAN MEDICAL DEVICE MANUFACTURER F A C E M A S K V E N T I L A T I O N V A L V E • ISO 9001 and USP VI compliant • Compatible with overmolding onto PP • Translucent and highly colorable • Soft touch • Provided valuable regulatory support and documentation, enabling faster internal trials and material qualification for this customer • Worked together with customer to select the best material from a broad portfolio of medical TPE grades • Trusted as a polymer supplier for multiple healthcare applications Dynaflex™ G2711 Thermoplastic Elastomer KEY REQUIREMENTS WHY AVIENT?

Dynaflex G - Cooler Feet & Wagon Wheel Tread COOLER MANUFACTURER C O O L E R F E E T & W A G O N W H E E L T R E A D • Abrasion resistance and excellent tear strength • UV and heat stability • Overmoldable to PP or PC • Provided durable TPE materials at target durometers to achieve component-specific performance requirements • Offered rapid response technical support for mold trials and guidance on processing best practices • Delivered consistent material quality globally and with short lead times Dynaflex™ G KEY REQUIREMENTS WHY AVIENT?

Use of Non GAAP Measures Page 3 -150.00% -50.00% 50.00% 150.00% 250.00% 350.00% PolyOne S&P 500 Strategy and Execution Drive Results Page 4 All time closing high of $29.48 August 1, 2013 • 15 consecutive quarters of double digit EPS growth • 42% CAGR adjusted EPS expansion 2006-2012 • YTD stock price has increased 42% versus 20% growth in the S&P • 275% increase in market cap: $0.7b $2.6b since 2006 The World’s Premier Provider of Specialized Polymer Materials, Services & Solutions Four Pillar Strategy Page 5 PP&S 15% Specialty Distribution 25% 0.12 0.27 0.21 0.13 0.68 0.82 1.00 2.50 $0.00 $0.25 $0.50 $0.75 $1.00 $1.25 $1.50 $1.75 $2.00 $2.25 $2.50 2006 2007 2008 2009 2010* 2011* 2012* 2015 Target Ad ju st ed E ar ni ng s P er S ha re Appliance 6% Building & Construction 13% Wire & Cable Electrical & Electronics 4% Consumer Packaging 18% Industrial 10% Misc. 5% HealthCare Transportation 16% Textiles 1% United States 70% Europe 14% Canada 8% Asia 5% Latin America 3% 2012 Revenues: $4.0 Billion* End Markets* 2012 Revenues: $4.0 Billion* EPS Page 6 * Pro Forma includes FY2012 results for Spartech (11/03/12 YE) and Glasforms & excludes discontinued operations PolyOne At A Glance * Restated to exclude discontinued operations Old PolyOne Transformation *Operating Income excludes corporate charges and special items **Pro Forma results include Spartech and Glasforms acquisitions, Specialty Coatings reclass and excludes discontinued operations 2% 34% 43% 45% 60% 65- 75% 0% 20% 40% 60% 80% 100% 2005 2008 2010 2012 2012 PF** 2015 % o f O pe ra tin g In co m e* JV's PP&S Distribution Specialty Specialty OI $5M $46M $87M $114M $150M Target Mix Shift Highlights Specialty Transformation 2015 Target Page 7 2006 H1 2013 2015 Where we were Where we are Organic Consolidated Target 1) Operating Income % Specialty: Global Color, Additives & Inks 1.7% 12.7% 12.6% 12 – 16% Global Specialty Engineered Materials 1.1% 10.9% 9.2% 12 – 16% Designed Structures & Solutions — — 4.4% 8 – 10% Performance Products & Solutions 5.4% 8.1% 8.2% 9 – 12% Distribution 2.6% 6.1% 6.1% 6 – 7.5% 2) Specialty Platform % of Operating Income 6.0% 62% 65 – 75% 3) ROIC* (after-tax) 5.0% 9.4% 15% 4) Adjusted EPS Growth N/A 26% Double Digit Expansion Proof of Performance & 2015 Goals *ROIC is defined as TTM adjusted OI divided by the sum of average debt and equity over a 5 quarter period Page 8 *Percentage of Specialty Platform revenue from products introduced in last five years 19.5% 46.5% 2006 Q2 2013 $20.3 $44.7 2006 TTM Q2'13 14.3% 31.1% 2006 Q2 2013 Research & Development Spending Specialty Platform Vitality Index Progression* Innovation Drives Earnings Growth ($ millions) Specialty Platform Gross Margin % Page 9 We are Experts in Polymer Science and Formulation  Polymer Science  Formulation  Chemistry  Processing Inputs  Base Resins  Additives  Modifiers  Colorants Specialized Polymer Materials, Services, and Solutions Expertise Satisfied Consumers PolyOne Customer Innovative Products & Services  Marketplace Demands  Performance Requirements  Value Drivers Page 10 Positioned for Strong Growth 2015 Target Rev: $5B Adj. EPS: $2.50 Assumptions • Operating margins in mid-range of 2015 targets • No global recession • No investment in incremental PP&S capacity • Completion of 2-3 midsize accretive acquisitions • Housing starts at 85% of 50 year norm by 2015 • Mid single digit revenue CAGR • Remain comfortably below 3X Net Debt / EBITDA Page 11 2012 Rev: $2.9B Adj. Platform sales and operating income (OI) 2006Y* 2008Y* 2010Y* 2012Y* 2012PF** Global Specialty Engineered Materials Sales $ 345.3 $ 514.0 $ 517.4 $ 543.6 $ 773.0 Global Color, Additives and Inks Sales 531.8 554.3 527.4 703.5 828.5 Designed Structures and Solutions - - - - 850.6 Specialty Platform Sales $ 877.1 $ 1,068.3 $ 1,044.8 $ 1,247.1 $ 2,452.1 Performance Products and Solutions Sales 1,166.2 1,001.4 776.3 837.0 696.1 PolyOne Distribution Sales 732.8 796.7 911.9 1,030.3 1,030.3 Corporate and Eliminations (153.7) (127.7) (111.1) (121.8) (121.6) Total Sales $ 2,622.4 $ 2,738.7 $ 2,621.9 $ 2,992.6 $ 4,056.9 Global Specialty Engineered Materials OI $ 3.9 $ 17.6 $ 49.7 $ 47.0 $ 47.7 Global Color, Additives and Inks OI 8.9 28.1 37.7 66.8 81.6 Designed Structures & Solutions OI - - - - 20.9 Specialty Platform OI $ 12.8 $ 45.7 $ 87.4 $ 113.8 $ 150.2 Performance Products and Solutions OI 64.2 31.3 54.0 74.9 37.4 PolyOne Distribution OI 19.2 28.1 42.0 66.0 66.0 Sunbelt Joint Venture OI 102.9 28.6 18.9 - - Corporate and eliminations (4.6) (28.9) (32.5) (33.7) (40.0) Special items in OI 39.1 (396.2) 4.8 (53.9) (53.9) Operating income (loss) GAAP $ 233.6 $ (291.4) $ 174.6 $ 167.1 $ 159.7 Sunbelt equity income (107.0) (32.5) (23.1) - - Special items in OI (39.1) 396.2 (4.8) 53.9 53.9 Operating income adjusted $ 87.5 $ 72.3 $ 146.7 $ 221.0 $ 213.6 Global Specialty Engineered Materials - OI % of sales 1.1% 3.4% 9.6% 8.6% 6.1% Global Color, Additives and Inks - OI % of sales 1.7% 5.1% 7.1% 9.5% 9.8% Designed Structures & Solutions – OI % of sales - - - - 2.5% Specialty platform OI - % of sales 1.5% 4.3% 8.4% 9.1% 6.1% PP&S operating OI - % of sales 5.5% 3.1% 7.0% 9.0% 5.4% Distribution OI - % of sales 2.6% 3.5% 4.6% 6.4% 6.4% PolyOne OI adjusted - % of sales 3.3% 2.6% 5.6% 7.4% 5.3% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment. ** Pro Forma results include Spartech and Glasforms acquisitions, Specialty Coatings reclass and exclude the Resin business assets. *** Restated results to exclude the Resin business and to remove Specialty Coatings from the Performance Products and Solutions segment into Global Color, Additives and Inks segment.

母粒和预着色料可用于多种聚合物，包括PE， PP，PEBA，PC，ABS等。 ™ 在三个通过ISO 13485认证的医疗产线生产 全球统一的配方，提供全球一致性和供应链 保障 提供文件化的变更控制 原料指纹图谱和常规批次测试 多种标准颜色缩短产品开发时间 产品组合里符合标准的颜色用于： - 注射针头ISO 6009 - 眼科容器盖（美国眼科学院 / AAO - American Academy of Ophthalmology） 颜色 潘通色 参照 PE 基料 PP 基料 透明PP 基料 PEBA 基料 PC 基料 ABS 基料* — PE0M176031 PP0M176045 ** AH0M415001 NC0M176058 ** SB0M665206 102C PE1M176076 PP1M176060 PP1M176062 AH1M415002 NC1M176058 NC1M176059 SB1M664958 158C PE2M176044 PP2M176046 ** ** NC2M176044 NC2M664912 SB2M664939 199C PE3M176131 PP3M176111 PP3M176113 AH3M415002 NC3M176116 NC3M176122 SB3M665037 196C PE3M176130 PP3M176109 ** AH3M415001 NC3M176117 NC3M665052 SB3M665039 2593C PE4M176023 PP4M176036 PP4M176039 AH4M415001 NC4M176038 NC4M176044 SB4M664978 292C PE5M176155 PP5M176169 ** AH5M415003 NC5M176142 ** SB5M665402 285C PE5M176154 PP5M176171 PP5M176175 AH5M415002 NC5M176143 NC5M176146 SB5M665404 288C PE5M176153 PP5M176173 ** ** NC5M176144 ** SB5M665406 346C PE6M176128 PP6M176111 ** ** NC6M176118 ** SB6M665070 3145C PE6M176126 PP6M176115 ** ** NC6M176119 ** SB6M665068 348C PE6M176127 PP6M176113 PP6M176118 AH6M415001 NC6M176120 NC6M176121 SB6M665072 425C PE7M176066 PP7M176091 PP7M176094 ** NC7M176124 ** SB7M665297 Cool Gray 5C PE7M176067 PP7M176089 ** AH7M415001 NC7M176125 NC7M665175 SB7M665295 7502C PE8M176048 PP8M176058 ** ** NC8M176058 ** SB8M664871 463C/731C PE8M176049 PP8M176060 ** ** NC8M176059 ** SB8M664869 Black C PL9M176008 PP9M176017 ** ** NC9M176008 NC9M176009 SB9M664896 颜色可能与显示的实际颜色有所不同。 透明PP 基料* 白色 黄色 橙色 红色 粉色 紫色 浅蓝色 正蓝色 深蓝色 浅绿色 蓝绿色 正绿色 深灰色 正灰色 米色 棕色 黑色

These custom-engineered products are available with a wide variety of core materials, including end-grain balsa, foam or engineered woods and laminate face-sheets with continuous fiberglass and/or carbon fiber reinforced polyester, vinyl ester and epoxy or custom resins.