Bergmann GmbH Adolf-Dambach-Str. 2-4 76571 Gaggenau die Einführung und Anwendung eines Managementsystems gemäß DIN EN ISO 50001:2018 für den Geltungsbereich: Entwicklung und Produktion von technischen Thermoplasten; an den Standorten gemäß Anlage. Bergmann GmbH Adolf-Dambach-Str. 2-4 76571 Gaggenau c/o Avient ECCOH High Performance Solutions GmbH Oldendorfer Straße 9, 49324 Melle Produktion von technischen Thermoplasten

Density Impact Flexural Tensile HDT Equilibrium Moisture — PKE-GF PA12-GF PA612-GF 5 4 3 2 1 0 Impact Shrink Modulus Chemical Resistance Flexural (Cond.) CO2 Emission Factor — PKE-GF — PA6-GF — PA66-GF HDT Wear Density 5 4 3 2 1 0 Equilibrium Moisture 1: Poor 3: Good 5: Excellent

And, because TPEs can be overmolded, brand owners and packaging manufacturers have new options for designing components that can be integrated directly into the package. 4345, 4355, 4365 4465 4570 4665 Hardness Shore A 45A, 55A, 65A 65A 70A 65A Regulatory* • EU 10/2011 Color Translucent Translucent Natural Natural Overmolding Bonds To Polypropylene Polypropylene Polar substrates Polar substrates Chemical Resistance • #1 for soaps • Low-cost solution for non-polar oils • #2 for soaps • Some oils • #1 for polar & non-polar oils • #1 for non-polar solvents, like isododecane • #2 for non-polar oils • Abrasion resistance * Regulatory compliance is offered for consideration only—limitations apply; please check with product stewardship.

In addition, its customers have an obligation to comply with Federal Energy Regulatory Commission (FERC)2 physical security requirements. Using GlasArmor panels, Ballisti-Wall® and Ballisti- Cover® solutions enable utility companies to add a superior level of protection to critical components and meet FERC security requirements within a modular, adaptable construction. 1 https://www.nbcnews.com/news/us-news/three-substations- attacked-washington-state-rcna63214 2 https://www.ferc.gov/sites/default/files/2020-04/E-4_10.pdf © 2023, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 To learn more about Avient’s advanced composite solutions, visit www.avient.com/composites.

Zone 2 - Center 420°F 460°F 215°C 235°C Zone 3 - Front 430°F 470°F 220°C 240°C Nozzle 440°F 480°F 225°C 250°C Melt & Mold Temperatures English (°F) Metric (°C) Comments Melt Temperature 440°F 480°F 225°C 250°C Wipe down mold surface after each production run.Mold Temperature 125°F 200°F 50°C 90°C Notes These guidelines are based on lab results, and their values may not reflect actual processes using different machinery. Drying Conditions English (°F) Metric (°C) Temperature 180°F 80°C Duration 2-4 Hours Moisture Level Allowable 0.05%–0.20% Processing Screw Speed Typical screw speeds are recommended Back Pressure Lower back pressure is recommended Pack Pressure 60 - 80% of max injection pressure Hold Pressure 40 - 60% of max injection pressure Cool Time 10 - 30 seconds (depends on part geometry and dimensional stability) www.avient.com Copyright © 2020, Avient Corporation.

AFNOR M 2 in France, DIN 4102 B 2–B 1 in Germany, UNI 8457–9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3–5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

All products passed the OEKO-TEX® 100-2 standard, do not include plasticizers, and contain lower VOCs than traditional adhesive solutions. KEY CHARACTERISTICS • High-wearing comfort and elastic recovery • Strong and seamless adhesion to polyester and nylon fabrics • Passed OEKO-TEX 100-2 testing • Excellent washability at up to 60°C • Non-toxic formulations with low volatile organic compounds (VOC) and without added plasticizers • Attractive alternative to conventional TPU adhesive film and glue MARKETS & APPLICATIONS Versaflex TF Adhesive TPE solutions have been custom engineered for: • Elastic strips in underwear • Seam tapes in sports and fitness apparel PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

VersaflexTM PF Versaflex PF VOC VERSAFLEX PF VOC 39 LDPE / 13 Versaflex PF VERSAFLEX PF 39 LDPE / 13 Versaflex PF N /2 5 N /2 5 F = 25 ° C 7 I = 25 ° C 20 MD6741 / MD6700 VERSAFLEX PFTM +86 021 60284888 www.avient.com VERSAFLEX™ PF 1 CF6751 PP 2 2420K LDPE Versaflex™ PF MD6727 Versaflex™ PF MD6741 Versaflex™ CF 6751 Versaflex™ PF MD6649 Versaflex™ PF 9512 Versaflex™ CF 8888N-A Versaflex™ PF MD6666 Versaflex™ PF MD6748 Versaflex™ PF MD6700 Versaflex™ CF 9000 PP PVC Tg (°C) -26 -43 -30 -26 -5 1 -6 0 5 / (Shore A) 50 49 35 37 38 35 37 31 30 19 MFI (190°C, 2.16kg) (g/10min) / / / 15 5 15 20 3 5 27 MFI (230°C, 2.16kg) 8 20 8 / / / / / / / 1 LDPE 2420k2/LDPE 2420k/Versaflex™ =4.5/4.5/1 ; =50um (N/25mm) 25°C 20 1.3 1.8 7.9 2.5 2.2 2.7 3.3 3.0 3.7 4.3 75°C 7 5.7 2.9 7.2 3.1 4.0 4.3 4.3 5.5 5.6 / PMMA (N/25mm) 25°C 20 1.8 2.0 7.2 2.6 2.8 3.0 3.6 3.3 3.9 4.9 75°C 7 5.5 4.7 7.1 3.5 / 4.7 6.5 5.8 6.9 /

Keep all mill information from cartons or skid wrappers (lot, run and order numbers, dates, etc.) for proper identification, in case of a problem or claim. 2 mils and up: transparent super soft-handed

TEMPERATURE Material Rear Center Front Nozzle Melt Mold Nylon 6,6 540–570 530–560 530–560 540–570 540–570 200–300 (90–150) Nylon 6,6 30% SS 540–570 530–560 530–560 540–570 540–570 200–300 (90–150) PBT 510–410 (265–280) 490–540 (255–280) 480–530 480–530 480–530 150–250 (65–120) PC 14% NiCF 540–570 540–570 530–560 530–560 530–560 150–250 (65–120) ABS 470–520 460–520 460–520 460–530 (240–275) 460–530 (240–275) 100–200 (40–90) PP 440–480 (225–250) 440–480 (225–250) 430–470 (220–245) 420–460 (215–240) 420–460 (215–240) 125–175 (50–80) DRYING Material Temperature °F (°C) Time Minimum Moisture Maximum Moisture Nylon 6,6 14% NiCF 180 (80) 4–5 hours 0.05% 0.20% Nylon 6,6 30% SS 180 (80) 4–5 hours 0.05% 0.20% PBT 14% NiCF 250 (120) 6-8 hours 0.02% 0.03% PC 14% NiCF 250 (120) 3–4 hours 0.02% 0.02% ABS 14% NiCF 200 (90) 2–4 hours 0.05% 0.10% PP 14% NiCF 180 (80) 2–4 hours 0.20% 0.30% Equipment • Feed throats smaller than 2.5" may cause bridging due to pellet size - Larger feed throats will be more advantageous with long fiber EMI shielding resins • General purpose metering screw is recommended - Mixing/barrier screws are not recommended • L/D ratio - 18:1–20:1 (40% feed, 40% transition, 20% metering) • Low compression ratio - 2:1–3:1 • Deep flights recommended - Metering zone 3.5 mm - Feed zone 7.5 mm • Check ring - Three-piece, free-flowing check ring • General purpose nozzle (large nozzle tips are recommended) - Minimum orifice diameter of 7/32" - Tapered nozzles are not recommended for long fiber EMI shielding resins • Clamp tonnage: - 2.5–5 tons/in2 Gates • Large, free-flow gating recommended - 0.25" x 0.125" land length - 0.5" gate depth Runners • Full round gate design • No sharp corners • Minimum of 0.25" diameter • Hot runners can be used PROCESSING Screw Speed Slower screw speeds are recommended to protect fiber length Back Pressure Lower back pressure is recommended to protect fiber length Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) PROCESS CONSIDERATIONS Recommended – retain fiber length (maximize conductivity) • Low shear process • Low screw speed and screw RPM • Slow Injection speed • Fill to 99–100% on first stage of injection - Reduces potential nesting of fibers at gate location - Improves mechanical performance near gate location - Promotes ideal fiber orientation Resin Rich Surface • Achieved when using a hot mold temperature and longer cure times ≥ Max mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could reduce attenuation performance in an assembly Fiber Rich Surface • Achieved when using a cold mold temperature and shorter cure times ≤ Minimum mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could improve attenuation performance in an assembly www.avient.com Copyright © 2020, Avient Corporation.