Zone 2 - Center 430° F 470° F 221° C 243° C Zone 3 - Front 440° F 480° F 227° C 249° C Nozzle 450° F 480° F 232° C 249° C MELT & MOLD TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS Melt Temperature 450° F 480° F 232° C 249° C After processing, always purge residual PKE materials with fractional melt flow HDPE or PP.Mold Temperature 150° F 200° F 66° C 93° C DRYING CONDITIONS ENGLISH (°F) METRIC (°C) COMMENTS Temperature 180° F 82° C Drying not required. Duration 2–3 Hours Moisture Level Allowable N/A Notes These preliminary guidelines are based on lab results.

Zone 2 - Center 420°F 460°F 215°C 235°C Zone 3 - Front 430°F 470°F 220°C 240°C Nozzle 440°F 480°F 225°C 250°C MELT & MOLD TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS Melt Temperature 440°F 480°F 225°C 250°C Wipe down mold surface after each production run. DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

AFNOR M 2 in France, DIN 4102 B 2 – B 1 in Germany, UNI 8457 – 9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3-5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

PDI) on extruded profiles 2 ASTM D-638 3 ASTM 256 4 ASTM D-648 66 psi, unannealed, 0.125" 5 Savings depends on profile size and production volume Acrylite is a registered trademark of Evonik Performance Materials Lens Performance Resilience™ LS Frost PVC Acrylite® Satinice Frost PMMA Light Transmission1 at 0.060" (1.5mm) 83% Low Diffusion 78% Medium Diffusion 75% High Diffusion 81% Low Diffusion Diffusion Half Power Angle (DLD) 26° Low Diffusion 41° Medium Diffusion 58° High Diffusion 26° Low Diffusion Tensile Strength2 Tensile Modulus2 Tensile Elongation (break)2 7,360 psi 400,000 psi 20% 7,330 psi 330,000 psi 43% Flammability (UL 94) V-0 @ 1.5mm 5VA @ 2.0mm HB @ 1.6mm Notched Izod Impact (73°F)3 2.3 ft-lb/in 0.6 ft-lb/in Heat Deflection Temperature4 157°F/69°C 182°F/83°C UV Stability Good Excellent Chemical Resistance Excellent Good Typical Lens Profile Cost 10–15% Savings5 Baseline 1.866.POLYONE www.polyone.com Copyright © 2018, PolyOne Corporation.

KEY CHARACTERISTICS • Intended for use in a variety of thermoset epoxy systems • Based on heat stability, lightfastness, weatherability and toxicity • Use level is 1%–2% for thick casting and 5%–10% for a thin coating APPLICATIONS Stan-Tone EPX dispersions are suitable for use in a variety of applications, including: • Protective coatings • Adhesives • Epoxy flooring • Electrical potting • Composites • Laminates Stan-Tone Code Pigment Type Approx. % Pigment Specific Gravity Color Index Lightfastness WHITE 10EPX03 Titanium Dioxide, Rutile 57 1.95 PW-6 I/O YELLOW 12EPX01 Diarylide AAOT GS 25 1.22 PY-14 I 12EPX03 Diarylide HR RS 20 1.2 PY-83 I/O (Mass) 13EPX02 Isoindolinone RS 30 1.3 PY-110 I/O 13EPX03 Benzimidazolone GS 40 1.27 PY-151 I/O (Mass) 81EPX01 Iron Oxide 40 1.62 PY-42 I/O ORANGE 15EPX03 Benzimidazolone 30 1.26 PO-36 I/O RED 23EPX04 Quinacridone BS 25 1.21 PV-19 I/O 23EPX06 Specialty Naphthol BS 30 1.21 PR-170 I/O (Mass) C 25EPX01 Red 2B, Ca Salt Bs 24 1.27 PR-48:2 I/O (Mass) 28EPX01 Red 2B, Ba Salt YS 23 1.29 PR-48:1 I/O (Mass) 82EPX01 Iron Oxide, Light BS 40 1.67 PR-101 I/O 82EPX02 Iron Oxide, Dark BVS 40 1.68 PR-101 I/O 82EPX04 Iron Oxide, Light VYS 40 1.67 PR-101 I/O BLUE 40EXP03 Phthalocyanine GS 25 1.25 PB-15:3 I/O 40EXP05 Phthalocyanine RS 25 1.25 PB-15:3 I/O 42EXP02 Ultramarine 50 1.54 PB-29 I/O 49EXP01 Cobalt 50 1.83 PB-28 I/O GREEN 50EPX02 Phthalocyanine BS 18 1.34 PG-7 I/O 50EPX03 Phthalocyanine YS 25 1.42 PG-7 I/O 59EPX01 Chromium Oxide 40 1.64 PG-17 I/O VIOLET/MAGENTA 24EPX03 Quinacridone Violet 15 1.2 PV-19 I/O 24EPX04 Ultramarine Violet 50 1.66 PV-15 I/O 24EPX05 Quinacridone Magenta 20 1.21 PR-122 I/O 24EPX06 Benzimidazolone 20 1.2 PV-32 I/O 24EPX07 Carbazole Violet 15 1.2 PV-23 I/O BROWN/TAN 83EPX01 Iron Oxide, Light 39 1.64 PBr-6 I/O 83EPX02 Iron Oxide, Dark 40 1.66 PBr-6 I/O BLACK 90EPX01 Furnace - High Jet 14 1.23 PBk-7 I/O 90EPX04 Furnace - Medium 20 1.25 PBk-7 I/O 90EPX05 Iron Oxide 50 1.77 PBk-11 I/O EPX RS = Red Shade YS = Yellow Shade VYS = Very Yellow Shade BS = Blue Shade VBS = Very Blue Shade GS = Green Shade HR = Heat-Resistant LIGHTFASTNESS I = Indoor Only I/O = Indoor or Outdoor Mass = Outdoor Masstone Application Only C = Some Caution Advised www.avient.com Copyright © 2020, Avient Corporation.

Further, according to international standard IEC 60670-1, the materials used in the wall boxes have to pass a Glow Wire Flammability Index (GWFI) 850°C testing (IEC 60695-2-12) at the application thickness, and 960°C at 2mm. Additional advantages of these TPEs include: • Highly flame retardant without the inclusion of halogens • Low temperature flexibility • Excellent processability • Good abrasion resistance • Excellent colorability • Operating temperatures from -50° C to +100° C • All grades meet UL94-V0 at 1.5 mm • All grades pass IEC 60695-2-12 Glow Wire Flammability Index (GWFI) at 960°C

Sono stati allegati al suddetto documento: - il consenso espresso per iscritto dal Consiglio di Ammini- strazione della Società, redatta in inglese, debitamente au- tenticata e apostillata; - copia conforme della delibera del socio unico in data 8 no- vembre 2021, redatta in doppia lingua inglese e francese, de- bitamente autenticata e apostillata; - lo statuto aggiornato della Società, redatto in doppia lin- gua inglese e francese, debitamente apostillato; 2. estratto della Società dal Registro delle Società e del Commercio del Lussemburgo in data 12 novembre 2021, redatto in lingua francese e debitamente apostillato, portante la nuova denominazione sociale. F.TO: EDOARDO CORÒ F.TO: EDMONDO TODESCHINI Copia su supporto informatico conforme al documento originale nei miei atti, su supporto cartaceo ai sensi dell'art. 22 comma 2 D.Lgs 7 marzo 2005 n. 82, che rilascio in tempo utile per la sua registrazione, per uso Registro Imprese.

There are a number of countries that have chemicals inventories. Chemicals are often assigned unique numbers which act as chemical identifiers and assist industries in determining which materials are listed on which inventories. 

Bergmann GmbH Adolf-Dambach-Str. 2-4 76571 Gaggenau the introduction and application of a management system according to ISO 50001:2018 Scope: DEVELOPMENT AND PRODUCTION OF TECHNICAL POLYMERS The proof has been furnished by an audit.

TIER 2 SUPPLIER H V A C F L A P • Eliminate post treatment heating of parts to achieve required odor level (≤3.0 VDA 270) • Lowest VOC / FOG performance (VDA 278) at the same compression set as previous material • Reduced processing steps and lowered energy costs for the molder • Achieved targeted odor levels and met VOC / FOG performance and compression set standards OnFlex™ LO Thermoplastic Elastomer WHY AVIENT?