Forward-looking statements give current expectations or forecasts of future events and are not guarantees of future performance. In particular, these include statements relating to future actions; prospective changes in raw material costs, product pricing or product demand; future performance; estimated capital expenditures; results of current and anticipated market conditions and market strategies; sales efforts; expenses; the outcome of contingencies such as legal proceedings and environmental liabilities; and financial results. Pro Forma Financial Information The Company acquired Avient Protective Materials (“Dyneema”) on September 1, 2022 (the “Acquisition Date”) and sold the Distribution segment on November 1, 2022.

BARREL TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS Zone 1 - Rear 420° F 460° F 216° C 238° C Long residence times are not advised. Screw Speed Low–moderate Injection Velocity 1–3 inch per second Back Pressure Low–moderate Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Long residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

PolyOne Corporation Page 1 PolyOne Investor Presentation Gabelli Specialty Chemicals Conference March 2015 PolyOne Corporation Page 2 Forward-Looking Statements  In this presentation, statements that are not reported financial results or other historical information are “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements give current expectations or forecasts of future events and are not guarantees of future performance. They use words such as “will,” “anticipate,” “estimate,” “expect,” “project,” “intend,” “plan,” “believe,” and other words and terms of similar meaning in connection with any discussion of future operating or financial performance and/or sales

Back Home // Products // Engineered Fiber Solutions // Performance Fiber Conversion Calculator

AUTOMOTIVE OEM T A I L G A T E T R I M • Reduce part weight • Suitable solution for PP talcum-filled material • Class A surface finish • Compatible with core-back injection molding process • Offered a broad portfolio of solutions • Provided technical support to help with product selection and processing parameters • Reduced part weight by 18% • Decreased cycle time by 8% • Enabled good surface appearance for the tailgate trim Hydrocerol™ Chemical Foaming Agents KEY REQUIREMENTS WHY AVIENT?

DENTAL PRODUCTS MANUFACTURER T O O T H B R U S H E S • Achieve lower let-down ratios (LDRs) • Maintain sufficient antimicrobial functionality • Preserve clarity or retain opacity, depending on resin • Shorten lead times to minimize inventory and production bottlenecks • Provided full antimicrobial functionality at lower LDRs for 30% annual cost savings • Designed universal carrier that enabled additive use across a variety of resins • Reduced lead time over previous supplier by one week, enabling customer to better manage inventory levels and increase production efficiencies WithStand™ Antimicrobial Additives KEY REQUIREMENTS WHY AVIENT?

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile.

We recruit at more than 25 leading universities around the world and hire approximately 140 new graduates each year as full-time, co-ops or interns. Based on our 2021 goodwill impairment test, performed as of October 1, 2021, no reporting units were identified as being at risk of future impairment. Birmingham, Alabama 1.

Forward-looking statements give current expectations or forecasts of future events and are not guarantees of future performance. In particular, these include statements relating to future actions; prospective changes in raw material costs, product pricing or product demand; future performance; estimated capital expenditures; results of current and anticipated market conditions and market strategies; sales efforts; expenses; the outcome of contingencies such as legal proceedings and environmental liabilities; and financial results. Pro Forma Financial Information The Company acquired Avient Protective Materials (“Dyneema”) on September 1, 2022 (the “Acquisition Date”) and sold the Distribution segment on November 1, 2022.

As a member, we align our operations and strategies with ten universally accepted principles covering human rights, labor, environment, and anti-corruption. We have set a goal to reduce Scope 1 & 2 greenhouse gas (GHG) emissions by 55% and achieve operational carbon neutrality by 2050.