There are other properties requirements such as tensile, tear, creep, compression set, which are designed for functional performance.

Product range • Flame retardants to reduce flammability of fibers and fabrics especially in building and construction applications • Light stabilizers to protect fibers used outdoors or exposed to sunlight against UV light • Antimicrobials to protect hygienic fiber products from bacteria proliferation • Antistatics to reduce electrostatic charges • Antioxidants to reduce polymer oxidation during spinning and protect fabrics during service life • Optical brighteners to provide a brilliant white effect and blueish hue • Electrets to retain electrostatic charge on the polymer surface for a longer period of time in filtration applications • Hydrophobics to impart durable water repellency • Chain extenders for recycled polyester fibers • Others on request Product characteristics • Good spinnability • Fiber-specific QC and protocols • Lot-to-lot consistency • Carriers: PET, PBT, PA 6, PP, and others • Possibility to combine colors and additives into a combination concentrate for convenience • Product guidance from our fiber expert team • Focus on safe and sustainable formulations • Continuous filaments (POY, FDY, HOY, BCF) • Long and short spinning staple fiber • Nonwoven processes (spunbond and meltblown) Cesa™ Fiber Additives MagIQ™ Liquid Fiber Colorants & Additives Multiple color production • Depending on the manufacturing set-up, several injection points can be added to enable multiple color production at the same time on a single extruder Batch size flexibility • Fiber producers can manufacture anything from a few kilograms to hundreds of tons using the same simple process Rapid color changes • No extruder contamination and easy color-on, color-off operation increases color change speed Waste reduction • Rapid color changes, precise metering and the ability to adjust color in-line reduces waste during color changeovers Continuous metering & long spin pack life • High pigment and dye concentrations mean fewer pack changes are required • Where color is running low for larger volume runs, low level metering sensors alert operators and packs can be changed without disrupting production In-line IV adjustment • Specialist additives are available to adjust Intrinsic Viscosity (IV) in-line for rPET applications • These additives are available as single products, or can be combined with color to create a multi- functional formulation Color design service • Avient offers a dedicated color design service to help shorten product development cycles and enhance market agility Liquid color processing • Formulations are stable at temperatures up to 60°C and retain good flow properties at temperatures as low as 10°C • These formulations can help lower yarn friction and abrasion, and there is no fuming or evaporation during production Avient’s liquid fiber colorant technology combines advanced liquid color formulations with state-of-the-art, high-pressure metering equipment to enable late-stage injection of liquid color for spun-dyed polymer melt.

• The Committee will consist entirely of directors who the Board has determined have no material relationships with the Company, either directly or as a partner, shareholder, or officer of an organization that has a relationship with the Company, and: o who meet the definition of “independent” as set forth in the Corporate Governance Standards of the New York Stock Exchange; and o qualify as “non-employee directors” for the purposes of Rule 16b-3 under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). • Each Committee member will serve at the pleasure of the Board for such term as the Board may decide or until such Committee member is no longer a Board member.

WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 10 Facility: Avient Corporation - Albany 4 Rothwell Ave, PO Box 300-009 Albany Industrial Estate Auckland 0632 New Zealand Facility: Avient Corporation - Avon Lake (SEM) 554 Moore Road Activity: Design and Manufacture of Colorants and Additives for Plastics Activity: Design and Manufacture of Specialty Engineered Thermoplastics Facility: Avient Corporation - Barbastro Pol.

We recently set a goal to complete 100% of risk assessments on hazardous materials greater than 1 ton by 2025. In 2023, we will be setting a baseline on use of these listed hazardous substances with the intention of setting a target to reduce and ultimately remove these materials from our product portfolio. Our Code of Conduct establishes a clear set of ethical and behavioral standards for our business conduct.

We want to confirm we have your most updated contact information and make sure you are fully set up and linked to our Coupa account.

Sink Marks Melt too hot Insufficient material volume • Increase shot size • Increase packing pressure Part geometry too thick • Reduce wall thickness • Reduce rib thickness Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Increase transfer position Excess material volume • Decrease pack pressure • Decrease shot size Melt and/or mold temperature too hot Loose clamp • Reset mold height • Increase clamp tonnage Shrink Too much shrink • Increase cooling time Too little shrink • Decrease cooling time Burning • Reduce decompression • Clean, widen and increase number of vents • Increase gate size to reduce shear Wet material • Verify material is dried at proper condition Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression • Verify material has been dried at proper conditions Incorrect nozzle • Use reverse taper tip Weld Lines Melt front temperatures are too low • Increase pack and hold pressure • Increase gate size • Identify end of fill pattern and verify proper vent location • Add vents or increase vent width • Move gate location Warp • Reduce injection speed • Increase pack pressure • Increase pack time • Increase cool time Mold design • Non-uniform mold cooling Part design • Non-uniform wall thickness Thermolator incorrect temperature • Check settings • Inspect thermocouple Sticking in Mold Overfilled cavity • Decrease injection rate and pressure • Decrease hold pressure • Decrease cooling time Part too hot • Decrease barrel temperature • Increase cooling time • Increase draft angle • Polish cores in direction of ejection Black Specks Contamination • Purge machine Degradation • Reduce melt temperature • Reduce screw speed • Reduce back pressure Machine related • Check for wear on screw, barrel or check ring Delamination • Purge barrel to eliminate material contamination • Reduce sharp corners in material flow path • Increase venting Discoloration Oversheared material • Decrease melt temperature • Reduce residence time Mold design • Increase gate sizing Dry material • Check moisture of material to ensure it is within the recommended moisture percentage for molding 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

It enables: • Increased rPET content • Reduced CO2 emissions When added to PET preforms and bottles, ColorMatrix AAzure helps to: • Improve bottle quality - Reduced preform acetaldehyde by up to 80% - Improved mechanical strength - Lightweighting • Improve processability - Reduced bottle blowouts - Reduced scrap - Improved productivity • Reduce energy consumption during bottle blowing process ColorMatrix AAzure has a slight blue tint, which is useful for off-setting yellowing often associated with the use of rPET, and has minimal impact on final product color or aesthetics.

Our broad portfolio of product technologies and services sets us apart in the EVSE market, and our range of world-class services includes: Color Technology Custom color design and special effects to meet performance and aesthetic requirements Color & Design Services Trend & color insights, and product development assistance to optimize design Regulatory Coordination Assistance with new product approvals to reduce regulatory overhead and minimize risk Field Technical Service Support for tool design, startup, and production optimization to gain manufacturing efficiencies Sustainability Focus Innovative materials and solutions to help meet sustainability goals

ULTRA-FAST COLOR DEVELOPMENT AND DELIVERY Utilizing ColorMatrix advanced liquid colorants, Select formulations are created from a series of standardized color base- sets available across our global network of service facilities.