Investor Day - May 2012 - Global Color, Additives, and Inks

Investor Day - May 2012 - Global Color, Additives, and Inks

Investor Day - May 2012 - Global Color, Additives, and Inks

Investor Day - May 2012 - Global Color, Additives, and Inks

Investor Day - May 2012 - Global Color, Additives, and Inks

Stringers Bulkheads, Decking and Transoms Doors and Cabinetry Ceilings and Hatches MECHANICAL PERFORMANCE Superior strength-to-weight ratio PROPERTY TEST METHOD PANEL THICKNESS .50" .75" 1.00" 13 mm 19 mm 25 mm Core Density* ISO 845 7 lb/ft3 7 lb/ft3 7 lb/ft3 115 kg/m3 115 kg/m3 115 kg/m3 Flexural Rigidity ASTM D7249 35,000 lb/in2 10.3 kg/m2 75,000 lb/in2 21.9 kg/m2 118,000 lb/in2 34.5 kg/m2 Areal Weight Calculated 0.89 lb/ft2 4.3 kg/m2 1.03  lb/ft2 5.0 kg/m2 1.17  lb/ft2 5.7 kg/m2 Core Shear Yield ASTM C393 101 psi 0.70 MPa 96 psi 0.66 MPa 88 psi 0.61 MPa Max Load ASTM C393 357.5 lbs 162.2 kg 513.4 lbs 232.9 kg 551.1 lbs 250.0 kg Core Shear ULT ASTM C393 113 psi 0.78 MPa 109 psi 0.75 MPa 94 psi 0.65 MPa Face Bend Stress ASTM C393 9,008 psi 62.11 MPa 8,725 psi 60.16 MPa 7,542 psi 52.00 MPa USES & APPLICATIONS * Additional core density panels are available in 5 lb/ft3 (80 kg/m3) and 8 lb/ft3 (135 kg/m3).

POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables.

These materials combine the performance of select engineering resins with reinforcing additives, such as carbon powder, carbon fiber, nickel-coated carbon fiber and stainless steel fiber, for low-to-high levels of conductivity depending upon application requirements.

Additional draft may be required for grained/textured surfaces Gates • All types of gates can be used such as pin, fan, tunnel, tab and edge gates.

Additional draft may be required for grained/textured surfaces. 3 NYMAX BIO TROUBLESHOOTING Implement recommended solutions one at a time in the order specified until problem is resolved.