Composite Heat Release Technology for Firearm Barrels Overview and key characteristics of Composite Heat Release

Composite Heat Release Technology for Firearm Barrels Overview and key characteristics of Composite Heat Release

Composite Heat Release Technology for Firearm Barrels Overview and key characteristics of Composite Heat Release

It is designed to be repeatedly recycled because it can be heated and reshaped over and over again. The flakes are then heated to over 400 degrees Fahrenheit (F) for several hours. Next, the heated rPET is stretched into long thin cables, cooled, and chopped into pellets.

• Fiber reinforcement percentage (ranging from 20–70% fiber content, by weight) • Additive technologies (color, UV enhancement, flame retardancy, heat stabilization, etc.) You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

% Pigment Specific Gravity Color Index Lightfastness WHITE 10ET03 Titanium Dioxide, Rutile 56 1.74 PW-6 I/O YELLOW 12ET01 Diarylide AAOT GS 40 1.15 PY-14 I 12ET03 Diarylide HR RS 20 1.07 PY-83 I/O (Mass) 13ET02 Isoindolinone RS 20 1.11 PY-110 I/O 13ET03 Benzimidazolone GS 20 1.08 PY-151 I/O (Mass) 81ET01 Iron Oxide 60 1.84 PY-42 I/O ORANGE 15ET03 Benzimidazolone RS 25 1.11 PO-36 I/O RED 20ET01 Red Lake C YS 30 1.16 PR-53 I 22ET01 Lithol Rubine BS 30 1.17 PR-57:1 I 23ET04 Quinacridone BS 15 1.05 PV-19 I/O 23ET06 Specialty Naphthol BS 30 1.09 PR-170 I/O (Mass) C 25ET01 Red 2B, Ca Salt BS 29 1.15 PR-48:2 I/O (Mass) 28ET01 Red 2B, Ba Salt YS 30 1.18 PR-48:1 I/O (Mass) 82ET01 Iron Oxide, Light BS 60 1.94 PR-101 I/O 82ET02 Iron Oxide, Dark VBS 60 1.95 PR-101 I/O 82ET04 Iron Oxide, Light VYS 60 1.94 PR-101 I/O BLUE 40ET01 Phthalocyanine GS 25 1.11 PB-15:3 I/O 40ET05 Phthalocyanine RS 20 1.09 PB-15 I/O 42ET02 Ultramarine 55 1.46 PB-29 I/O 49ET01 Cobalt 65 2.02 PB-28 I/O GREEN 50ET01 Phthalocyanine BS 30 1.2 PG-7 I/O 50ET03 Phthalocyanine YS 25 1.16 PG-7 I/O 59ET01 Chromium Oxide 65 2.12 PG-17 I/O VIOLET/MAGENTA 24ET03 Quinacridone Violet 20 1.08 PV-19 I/O 24ET04 Ultramarine Violet 60 1.66 PV-15 I/O 24ET05 Quinacridone Magenta 20 1.08 PR-122 I/O 24ET06 Benzimidazolone 25 1.08 PV-32 I/O 24ET07 Carbazole Violet 13 1.05 PV-23 I/O BROWN/TAN 83ET01 Iron Oxide, Light 64 2.02 PBr-6 I/O 83ET02 Iron Oxide, Dark 60 1.9 PBr-6 I/O BLACK 90ET04 Furnace - Medium 22 1.12 PBk-7 I/O 90ET05 Iron Oxide 60 1.9 PBk-11 I/O POLYETHER URETHANE PASTE COLORANTS (ET) PEP/ET RS = Red Shade YS = Yellow Shade VYS = Very Yellow Shade BS = Blue Shade VBS = Very Blue Shade GS = Green Shade HR = Heat-Resistant LIGHTFASTNESS I = Indoor Only I/O = Indoor or Outdoor Mass = Outdoor Masstone Application Only C = Some Caution Advised www.avient.com Copyright © 2020, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

INDUSTRY BULLETIN STANDARD UNITS ONFLEX LO 7120-45N Volatile Organic Compounds VDA 278 ug/g(ppm) 41 Fogging VDA 278 ug/g(ppm) 521 Odor • Control • Dry conditions • Wet conditions SAE J1351 (15) 1-10 Scale 1 2 1 Compression Set (23°C) • 22 hours • 70 hours ASTM D395 % 14.4 14.6 Capillary Viscosity • 1341/s • 11170/s ASTM D3835 Pa*s 35 7 HVAC SYSTEMS OnFlex™ LO • Features: low VOC/FOG, low odor, good compression set, easy processing, overmolds to polypropylene • Example applications: seals and flaps in heating, ventilation and air conditioning systems CHARACTERISTICS ONFLEX™ LO ONFLEX™ AF TPE GENERAL PURPOSE TPV TPO Volatile Organic Compounds (VDA 278) Very Low Moderate Moderate Moderate Very Low Fogging (VDA 278 & DIN 75201) Very Low Moderate Moderate High Very Low Odor (VDA 270 Requirement ≤3.0) ≤3.0 ≤3.0 >3 >3 ≤3.0 Gloss Level Low Low Low Very Low High Tactile Feel Grippy Grippy Grippy Grippy Waxy Pre-Drying Required No No No Yes No Raw Material Costs $$ $$ $$ $$$ $ Compression Set @ RT Good Good Good Excellent N/A Compression Set @ ≥70°C Moderate Moderate Moderate Good N/A UV Resistance Good Excellent Good Good Good Weatherability Good Excellent Good Good Good Hardness Range Low to High Low to High Low to High Low to High High Density (g/ml) 1.15 0.99 0.90–1.20 0.95–0.98 0.90–1.20 GENERAL CHARACTERISTICS COMPARING TPE, TPV, TPO Grades shown on both pages are representative of solutions manufactured in North America, more grades available globally. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Injection Molding - Thermoplastics Injection molding creates molded parts by injecting heated, molten plastic materials into a mold, which are then cooled and solidified. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

We also conduct 360 assessments to help associates assess their individual development and progression based on feedback from key stakeholders.

Switching to PolyOne Conductive Polymer Triples Lifetime of LED Pool Lighting