Please refer to Product Data Sheets for specific shrinkage values for each individual grade. Refer to the individual product technical data sheet for specific drying recommendations. Refer to the individual product technical data sheet for specific drying recommendations.

However, the die casting process can be complex and can require a significant amount of secondary operations such as machining, coating, and part assembly that increase production time and cost. APPLICATION BULLETIN MATERIAL COMPARISON Long Fiber Reinforced Thermoplastics A380 Aluminum Specific Gravity (g/cc) 1.07–1.71 2.76 Impact Strength (ft/lbs) 2.8–3.6 2.95 Tensile Strength at Yield (psi) 14000–46000 23100 Temperature Resistance Good Excellent Corrosion Resistance Inherent Requires Coating Secondary Operations Limited Extensive Design Freedom Extensive Limited Sound Dampening Good Poor Color Molded-in-Color options Requires painting Material Cost Per Pound $$ $ Tooling Cost $$ $ Total Finished Assembly Cost $ $$ Selecting the right material for your application should include careful evaluation of the material’s technical data.

TEMPERATURE DISTRIBUTION DIAGRAM • Test Method: FTTS-FA-010-2007 4.2 • Equipment: Thermovision • Heat Source: 500W Halogen Lamp • Heat Distance: 100 cm Surface temperature before exposure: 20.22°C Surface temperature after 10 min exposure: 33.85°C Temperature change: +13.6°C Added Cesa Fiber Additives for heat preservation TEST METHOD STANDARD REQUEST TEST RESULT GB/T30127 Far infrared radiation properties Far infrared emissivity ≥0.88 (5-14um) (Test temperature: 34°C) 0.9 Far infrared radiation temperature rise ≥ 1.4°C 9°C GB/T 18319-2019 Thermal retention with accumulated by infrared ray Maximum temperature rise ≥ 6°C 8.9°C Mean temperature rise ≥ 4.4°C (20 minutes) 5.6°C FTTS-FA-010 Infrared radiation properties & thermal retention temperature rise Average emissivity ≥ 0.8 (2-22um) (Test temperature: 25°C) 0.8 Specified heating ΔT ≥ 0.5°C (relative to the standard) +5.34°C (ΔT) GB/T 11048-2008 Method A Thermal transmittance Unit: clo Naked body: 0 Underwear: 0.04 T-shirt: 0.09 Thick sweater: 0.35 Winter coat: 0.7 All the data above are the reference value 0.625 Human Physiological Experiment Blood flow volume +12.9% Blood flow velocity +13.6% Blood oxygenation(%SpO2) +1.7% www.avient.com Copyright © 2023, Avient Corporation.

Vinyl Powder Coatings: CORE™

Back Home // Products // Vinyl Formulations // Vinyl Powder Coating and Dip Molding // CORE™ VBX Series Vinyl Powder Slush Formulations

Use these low-temperature curing inks to stripe, code or top-coat your fluoropolymer wire and cable insulation.

LubriOne NY Silicone Natural Boundary lubricant.

Instead of simply coating fiber tows with polymer – inside PlastiComp’s impregnation die individual filaments in the fiber tows are spread apart so each is encapsulated with thermoplastic polymer. 

These formulations will help you create protective automotive underbody coatings, adhesive automotive decals, pin striping and labels for a range of signage applications.

Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe. Technical Data Sheets Safety Data Sheets