CHARACTERISTICS TPE THERMOSET RUBBER LIM* SILICONE PVC Compression Set Good Excellent Excellent Fair Heat Resistance Good Excellent Excellent Fair UV/Ozone Resistance Good Good Good Good Chemical Resistance Good Excellent Excellent Good Barrier Properties Excellent Good Excellent Excellent # of Manufacturing Steps Excellent Good Good Excellent Supply Chain Availability Excellent Excellent Fair Excellent Colorability Excellent Good Good Excellent Total Costs $$ $$$ $$$$ $ THERMOPLASTIC ELASTOMERS FOR HEALTHCARE GENERAL CHARACTERISTICS COMPARING TPE, RUBBER, SILICONE, AND PVC We offer a broad range of TPEs solutions that are specially formulated to meet demanding healthcare device and application challenges. PP OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Dynaflex™ G2706 28A USP Class VI, ISO 10993, Food contact EtO Soft translucent grade, grippy feel Dynaflex™ G2711 43A USP Class VI, ISO 10993, Food contact EtO Highly colorable solution, grippy feel, low compression set Versaflex™ CL2242 & CL2250 42A/ 50A USP Class VI, ISO 10993, US Food contact EtO Clear boilable grades; ABS, PC bondable Versaflex™ G2705 N 60A USP Class VI, ISO 10993, Food contact EtO/Steam High resilience, low compression set Versaflex™ HC3810 20A-90A USP Class VI, ISO 10993 EtO General purpose, unfilled ABS, PC OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versaflex™ OM1040 40A USP Class VI, ISO 10993 EtO Translucent Versaflex™ OM3060 60A USP Class VI, ISO 10993 EtO Clear VERSAFLEX™ CL AND DYNAFLEX™ TPEs OVERMOLDING FOR ERGONOMICS • Adds good tactile surface with soft-touch feel • Available in a variety of color effects and textures • Improves grip, cushion, and comfort • Enhances functional performance like sealing properties, vibration damping, oxygen barrier, and scratch and abrasion resistance • Reduces assembly costs, good processability • Offers excellent adhesion to a wide range of substrates • Glucometers • Medical tools overmolds • Injector pens • Analysis devices VERSALLOY™ HC & VERSAFLEX™ HC TPEs SEALING & RESEALING • Rubbery feel and soft touch • No coring, good puncture, and resealability in static stoppers • Meets low coefficient of friction requirements in dynamic seals • Low extractables • Suitable to overmold onto polyolefins • Sealing and resealing septum • Seals and sanitary gaskets • Syringe plungers and tips MATERIAL DESCRIPTION HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versalloy™ HC 9210-45N 45A USP Class VI EtO Good processability, HC 9210-55N 55A USP Class VI EtO Good processability, HC 9210-70N 70A USP Class VI EtO Good processability, HC 9220-43N 43A USP Class VI, ISO 10993-4/5 EtO Extrusion grade, high temperature resistance Versaflex™ HC 2110-35N 34A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Resealing, elevated comp set Versaflex™ HC 2110-57B 57A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Low stiction VERSAFLEX™ CL AND DYNAFLEX™ TPEs HIGH CLARITY GRADES WITHOUT PLASTICIZERS • Water clear grades formulated without phthalate plasticizers • Meets medical regulatory USP Class VI and ISO 10993-4,5 • Food contact and FDA compliant • Autoclave and radiation stable • Low extractable • High clarity (Haze 50 4.1, 100 4.5, 100 4, 70 6, 70 Tensile Modulus (MPa) 2200 2700 2600 2350 1820 1820 Flexural Strength (MPa) 80 90 104 86 68 68 Flexural Modulus (MPa) 2500 2700 2500 2300 1980 1590 HDT: 0.45, 1.8 (MPa) 110, 80 90, 80 100, 89 123, 100 123, 64 100, 70 UL-94 Rating @ 3.0 mm 5VA V-0 5VA V-0 HB V-0 UL-94 Rating @ 1.5 mm V-0 V-0 5VB V-0 HB V-0 UL-94 Rating @ 0.75 mm V-1 V-2 V-0 None None V-2 COMPETITIVE MATERIAL COMPARISON ENGINEERED POLYMER FORMULATIONS FOR HEALTHCARE TRILLIANT™ HC THERMOPLASTICS The family of Trilliant™ HC high-performance thermoplastics is formulated to meet the growing challenges of medical devices and equipment.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile.

Tax adjustments include the net tax benefit/(expense) from one-time income tax items, the set-up or reversal of uncertain tax position reserves and deferred income tax valuation allowance adjustments. SEC Filings

CHOOSING COLORS THAT SET YOU APART Finding a color or finish that catches the eye is vital to standing out on the shelf. We can recommend CMF choices that will dazzle and keep setting you apart from your competition.

We use a set of formal quality tools and systems in evaluating and tracking quality complaints. Avient has set a system to backup critical data. Material management Raw materials used in Avient healthcare applications must fulfill a minimum set of requirements.

Shot Size = 1.00 & Transfer Position = .50, Increase both by .10 to set a cushion of .10. Soak” time is what is referred to as the time it takes for the screw to heat up once the barrel is at the set temperature. Just because the barrel temperatures are at the set values, does not necessarily mean the screw temperature will be the same.

Tax adjustments include the net tax benefit/(expense) from one-time income tax items, the set-up or reversal of uncertain tax position reserves and deferred income tax valuation allowance adjustments. SEC Filings

Tax adjustments include the net tax benefit/(expense) from one-time income tax items, the set-up or reversal of uncertain tax position reserves and deferred income tax valuation allowance adjustments. SEC Filings

KEY CHARACTERISTICS GRADE NAME AREAL WEIGHT lb/ft2 NOMINAL THICKNESS in TENSILE MODULUS ksi FLEXURAL STRENGTH ksi COMMENTS > 95% PCR* recycled PET resin, 58% glass fiber Polystrand™ R 5840B 0.0903 0.09 4400 ~80 Equivalent to standard PETG, APET; Black * Resin source is 100% Post Consumer Recycled (PCR) content, but overall recycled content may vary based on color, additives, etc.

CARBON FIBER FIBERS PROCESSES PRODUCTS Molecular Structure Chemical Name Carbon, Graphite.