For all HB references, the color concentrates are listed with reference to resin chemistry, which enables total flexibility of choice for the resin grade. For V-0, V-1, V-2, 5VA and 5VB, the color concentrates have to be listed with reference to specific resin grades. If the required resin is not listed under Avient concentrates, please contact an Avient representative to discuss more options.

For all HB references, the color concentrates are listed with reference to resin chemistry, which enables total flexibility of choice for the resin grade. For V-0, V-1, V-2, 5VA and 5VB, the color concentrates have to be listed with reference to specific resin grades. If the required resin is not listed under Avient concentrates, please contact an Avient representative to discuss more options.

Custom pre-colored formulations can be developed in other resins upon customer request. KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified manufacturing sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Standard concentrates in a PE carrier and on request in PP • Pre-colored formulations can be supplied in specific resins selected for the application REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN DRUG TYPE COLOR DESCRIPTION PANTONE REFERENCE AVIENT PRODUCT CODE PE BASED Adrenergic agonist combinations Light Green 373 C PE6M176349 Adrenergic agonists Purple 2583 C PE4M176057 Anti-infectives Tan 467 C PE8M176130 Anti-inflammatory, nonsteroidal Grey Cool Grey 4 C PE7M176184 steroids Pink 197 C PE3M176237 Anti-inflammatory, immunomodulators Olive Green 5763 C On request Beta-blockers Yellow Yellow C PE1M176160 Beta-blocker combinations Dark Blue 281 C PE5M176272 Carbonic anhydrase inhibitors Orange 1585 C PE2M176089 Cytotoxic Black 6 C PL9M176008 Miotics Dark Green 348 C PE6M176267 Mydriatics and cycloplegics Red 1797 C PE3M176236 Prostaglandin analogues Turquoise 326 C PE5M176273 Healthcare use limitations apply—see below. For containers/bottles, Avient also offers Remafin™ EP White Colorants, available in low density and high density PE and PP resins.

MATERIAL SOLUTION DESCRIPTION KEY CHARACTERISTICS POTENTIAL APPLICATIONS Hammerhead™ FR Flame Retardant Industry-first flame retardant thermoplastic composite panels that meet ASTM E84 Class A standards for flame spread and smoke developed and passed NFPA 286 corner room burn testing • Excellent flame performance • Moisture, UV, corrosion, impact, and rot resistant • Lightweight structural integrity • Reduce labor cost and time • Interior Wall, Floor & Ceiling Panel Systems • Garage Doors • Exterior Sheathing • Siding & Cladding • Kitchen Cabinetry Hammerhead™ and Polystrand™ Composite Panels Thermoplastic composite panels constructed with Polystrand™ continuous fiber laminates thermally bonded to thermoplastic foam or honeycomb cores • Moisture, UV, corrosion, impact, and rot resistant • Lightweight structural integrity • Reduce labor cost and time • Garage Doors • Interior Entry Doors • Interior Wall, Floor & Ceiling Panel Systems • Exterior Sheathing • Siding & Cladding • Kitchen Cabinetry Polystrand™ Continuous Fiber Tapes & Laminates High strength unidirectional (UD) glass fibers combined with thermoplastic resins available in unidirectional tapes or multi-ply laminates • High strength and stiffness • Enables impact resistance • Formulations available to meet ASTM E84 Class A and Class B flame/smoke rating • Composite Deckng • Roofing Systems GlasArmor™ Ballistic Resistant Panels Ballistic protection constructed from layers of 0°/90° woven E-glass fiber reinforcements with a proprietary thermoset resin system • UL 752 Level 1–3 compliant • Less than 25% the weight of comparable steel panel • 1-hr fire rating per ASTM E119* • Safe/Panic Rooms • Garage Doors ThermoBallistic™ Thermoplastic Panels Industry-first thermoplastic ballistic resistant panels thermally formed with layers of 0°/90° UD E-glass fiber reinforcements and polyolefin-based resin systems • UL 752 Level 3 compliant • Extremely lightweight • Moisture, UV, and corrosion resistant • Safe/Panic Rooms • Garage Doors * UL Level 3 panel was fire tested as part of a wall system with steel studs and drywall facesheet

CRTM™ (Continuous Resin Transfer Molding) Reinforced Composite Sandwich Panels Lightweight, high-performance metal replacement solution PRODUCT DESCRIPTION Lightweight CRTM panels are custom engineered, high quality composite sandwich panels designed to deliver the structural benefits of metal panel systems. Tailored to customer design and performance specifications, panels are engineered with custom formulated resins, structural core materials, and fibers to achieve specific stiffness, strength, weight, performance and cost targets. The unique manufacturing process yields uniform quality throughout the panel, ensuring complete resin impregnation, high fiber volume content, low void content, uniform thickness, and core bonding throughout.

Efficacy performance and regulatory requirements are met in a wide range of resins compatible with WithStand antimicrobial technology. Specifically, these additives have been proven to be effective inhibiting E. coli and MRSA across these resins: • TPE/TPU • PET • HDPE • ABS • POM • PP • PC Custom formulations can be validated for various resin types, and under specific processing conditions, at an independent testing lab to ensure results in commercialization. ANTIMICROBIALS FOR PLASTICS Effective in reducing bacterial growth across a range of polymer resins Bacteria does not attach to surface of part molded with WithStand Bacteria attaches to surface of part molded without WithStand Side View Molded with antimicrobial additives Molded without antimicrobial additives

FIBER OPTICAL CABLES Molecular Structure Chemical Name Cured Phenol-Aldehyde from melt-spun Novalac resin. Composition Novaloid, or Phenolic fiber, is a thermoset organic fiber produced from a phenolic novolac resin. The precursor resin is melt-spun in a solution of formaldehyde and hydrochloric acid.

AVIENT ADVANCED COMPOSITES OVERVIEW LOWER ENERGY COSTS Requires less energy during installation and use INCREASE COMPETITIVE ADVANTAGE Customizable solutions for specific application needs REDUCE PRODUCT LIFECYCLE COSTS Lower installation time, as well as warranty and �part replacement � expenses EXTEND PRODUCT LIFETIME Corrosion, flame, fatigue and UV resistant for improved durability DESIGN STRONG, LIGHTER WEIGHT COMPONENTS Up to 75% lighter than steel and up to 25% lighter than aluminum ADVANCED COMPOSITES An exceptional alternative to traditional materials such as wood, ceramic and metal, advanced composite solutions enable designers to: • Design lighter weight structural components for increased lifetime performance and improved fuel efficiency—higher strength-to-weight ratios to exceed the structural performance of traditional materials while significantly reducing weight—up to 75% lighter than steel and up to 25% lighter than aluminum • Extend product lifetime to reduce part replacement and decrease warranty expenses— the corrosion, weather, flame and fatigue resistance of composite solutions improve component durability • Reduce product lifecycle costs—the extended product lifetime, along with the potential for reduced installation time and cost due to the lighter weight of composite solutions, significantly reduces the associated cost over the lifetime of a part • Lower energy costs—by leveraging a higher strength-to-weight ratio, composite solutions allow designers to engineer products that require less energy or power during installation and use • Increase competitive advantage—Avient advanced composite solutions can be customized to provide electrical insulation, thermal insulation, radiopacity, low thermal expansion, flexural memory and load damping, while delivering desired performance and aesthetic specifications TRANSPORTATION Truck floors, liners and aerodynamic components, rail car doors and panels, automotive structural solutions, leaf springs, traffic safety markers and delineators, air cargo unit load devices (ULDs) The Avient advanced composites portfolio offers customized solutions to serve a full range of markets and industries, including: USES & APPLICATIONS ENERGY Wind turbine blade stiffening components, sucker rods, oil & gas production solutions BUILDING & CONSTRUCTION Structural blast protection, garage doors, modular construction, temporary shelters, architectural columns, concrete and masonry reinforcements, pipe reinforcement HEALTHCARE External orthopedic fixators, endoscopy wands, prosthetics MARINE Panels for decking, bulkheads, cabinets, doors, transoms, ceilings; reinforcements for stringers; sail battens CONSUMER & RECREATION Archery bow limbs and risers, furniture springs, diving board springs, golf flagpoles, snowsports equipment, sporting stick shafts, paddle shafts, lightweight and extendable mast structures ELECTRICAL & TELECOMMUNICATIONS Utility poles and cross-arms, high voltage transmission & distribution insulator cores, surge arresters, bus bar covers and electrical tool components INDUSTRIAL Pallet stiffeners, pipe reinforcement, conveyor springs, dock shelters PROCESSES & CAPABILITIES Avient’s reinforced composite technologies use carbon, glass and aramid fibers with custom formulated thermoset or thermoplastic resins in continuous forming processes. These methods include: PULTRUSION • Fibers are impregnated with liquid thermoset resins, then pulled through a heated die to cure the resin and form the product • This continuous, automated manufacturing process creates constant cross section profiles of any pre-determined length with consistent, uniform quality and exceptional mechanical performance • Applications include rods and profiles of various lengths and complexities, such as utility poles, insulator core rods and structural beams CONTINUOUS FILAMENT WINDING • Combines the principles of filament winding with pultrusion to create constant or tapered cross- sectional tubing in precision sizes • The unique axial and biaxial fiber orientation provides flexural and tensile strength, as well as crush and burst resistance • Applications include lightweight shelter frames and sporting goods components CONTINUOUS RESIN TRANSFER MOLDING (CRTM™) • Engineered core materials are sandwiched between structural composite laminate face sheets • Continuous composite sandwich panels feature high specific strength and stiffness-to-weight ratio • Applications include ballistic resistant panels, truck floors and rail car doors CONTINUOUS FIBER REINFORCED THERMOPLASTICS • Fully recyclable tape, X-Ply™ (0°/90°), and other multi-ply configurations with widths up to 10' wide • Sandwich panels in unlimited lengths, up to 6" thick and 10' wide • High volume production capacity • Applications include structural and aerodynamic components in transportation, and reinforcement of materials such as wood and metal THERMOSET COMPOSITE LAMINATES & BARSTOCK • Unidirectionally reinforced barstock, laminates and hybrid composites engineered to maximize deflection and fatigue resistance • Customizable shapes and sizes • Applications include archery bow limbs, flat springs, prosthetics, sporting equipment THERMOSET FINISHING OPERATIONS • Customized finishing capabilities for barstock and laminates including machining, water-jet cutting, profiling/shaping, sanding, slitting, laminating, molding and coatings TESTING CAPABILITIES • Mechanical – Flexural, tensile, compression, shear, fatigue, impact resistance • Physical – Specific gravity/density, Barcol hardness, water absorption, void content, resin/fiber content, dye penetrant, viscosity • Thermomechanical – Coefficient of linear thermal expansion, glass transition temperature, deflection temperature, degree of cure, curing properties • Electrical – High-voltage, low current dry arc resistance of solid electrical insulation, dielectric strength, water diffusion ABOUT AVIENT ADVANCED COMPOSITES The Avient advanced composites portfolio consists of Glasforms™, Gordon Composites™ and Polystrand™ branded materials.

Three Months Ended ‘’’’’September 30, Platform operating income “””””””2013 2012 (a) Global Specialty Engineered Materials $ 15.7 $ 13.1 Global Color, Additives and Inks 28.7 18.6 Designed Structures and Solutions 10.9 – Specialty Platform 55.3 31.7 Performance Products and Solutions 14.3 12.3 PolyOne Distribution 16.6 16.4 Corporate and eliminations (24.6) (16.9) Operating income $ 61.6 $ 43.5 (a) Adjusted to reflect the resins business as a discontinued operation. Three Months Ended September 30, 2013 Three Months Ended September 30, 2012 (a) Reconciliation to Condensed Consolidated Statements of Income $ EPS $ EPS Net income from continuing operations attributable to PolyOne shareholders $ 23.2 $ 0.24 $ 19.4 $ 0.22 Special items, after tax 10.5 0.11 5.3 0.06 Tax adjustments (b) 1.8 0.01 0.1 - Adjusted net income / EPS $ 35.5 $ 0.36 $ 24.8 $ 0.28 Three Months Ended September 30, Reconciliation to Condensed Consolidated Operating Income 2013 2012 (a) Operating income before special items $ 72.4 $ 51.8 Special items in operating income (10.8) (8.3) Operating income, GAAP $ 61.6 $ 43.5 (a) Adjusted to reflect the resins business as a discontinued operation. Adjusted EPS 2006Y* 2007Y* 2008Y* 2009Y* 2010Y 2011Y 2012Y Net Income attributable to PolyOne common shareholders $ 130.9 $ 40.9 $ (417.0) $ 106.7 $ 152.5 $ 153.4 $ 53.3 SunBelt equity earnings, after tax (68.5) (26.1) (20.8) (19.0) (14.7) (3.7) - Special items, after tax (21.2) 41.4 310.0 (31.0) 15.8 (30.5) 35.7 Tax adjustments (30.0) (30.7) 147.2 (44.9) (88.3) (42.3) 0.5 Adjusted net income $ 11.2 $ 25.5 $ 19.4 $ 11.8 $ 65.3 $ 76.9 $ 89.5 Diluted shares 92.8 93.1 92.7 93.4 96.0 94.3 89.8 Adjusted EPS $ 0.12 $ 0.27 $ 0.21 $ 0.13 $ 0.68 $ 0.82 $ 1.00 * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment.

SAFETY EQUIPMENT MANUFACTURER R E S P I R A T O R A C C E S S O R Y P A R T S • Black color concentrate suitable for use in butyrate (PSU) • Low let down ratio (LDR) • Quick turnaround time • Offered compatibility with desired resin system in required color (Deep Black – OC9UFA) • Provided low usage rate of 1% LDR • Afforded immediate availability of sample for testing and ordering Omnicolor™ Multipurpose Colorants KEY REQUIREMENTS WHY AVIENT? AVIENT SOLUTION RESIN COMPATIBILITY + SPEED LEARN MORE © 2022, Avient Corporation, All Rights Reserved https://www.avient.com/products/polymer-colorants/solid-color-masterbatches/omnicolor-multipurpose-masterbatches