HDPE, PP, POM Fast acting new generation nucleant for PE and PP; improved dimensional stability, thermal and mechanical properties  Protection from moisture for improved barrier Reduced Moisture Vapor Transmission Rate (MVTR) HDPE ready-to-use formulation; moisture absorbing concentrates Protection from oxygen scavenging in PET Reduced transmission of oxygen vacuum loss in BCT (blood collection tubes) and protect reagents from oxygen degradation Protection from UV in transparent containers (PP, PE, PETG, COP) UV blocking in 290–450nm with no impact on clarity; protection of light sensitive reagents Copyright © 2022, Avient Corporation.

母粒和预着色料可用于多种聚合物，包括PE， PP，PEBA，PC，ABS等。 ™ 在三个通过ISO 13485认证的医疗产线生产 全球统一的配方，提供全球一致性和供应链 保障 提供文件化的变更控制 原料指纹图谱和常规批次测试 多种标准颜色缩短产品开发时间 产品组合里符合标准的颜色用于： - 注射针头ISO 6009 - 眼科容器盖（美国眼科学院 / AAO - American Academy of Ophthalmology） 颜色 潘通色 参照 PE 基料 PP 基料 透明PP 基料 PEBA 基料 PC 基料 ABS 基料* — PE0M176031 PP0M176045 ** AH0M415001 NC0M176058 ** SB0M665206 102C PE1M176076 PP1M176060 PP1M176062 AH1M415002 NC1M176058 NC1M176059 SB1M664958 158C PE2M176044 PP2M176046 ** ** NC2M176044 NC2M664912 SB2M664939 199C PE3M176131 PP3M176111 PP3M176113 AH3M415002 NC3M176116 NC3M176122 SB3M665037 196C PE3M176130 PP3M176109 ** AH3M415001 NC3M176117 NC3M665052 SB3M665039 2593C PE4M176023 PP4M176036 PP4M176039 AH4M415001 NC4M176038 NC4M176044 SB4M664978 292C PE5M176155 PP5M176169 ** AH5M415003 NC5M176142 ** SB5M665402 285C PE5M176154 PP5M176171 PP5M176175 AH5M415002 NC5M176143 NC5M176146 SB5M665404 288C PE5M176153 PP5M176173 ** ** NC5M176144 ** SB5M665406 346C PE6M176128 PP6M176111 ** ** NC6M176118 ** SB6M665070 3145C PE6M176126 PP6M176115 ** ** NC6M176119 ** SB6M665068 348C PE6M176127 PP6M176113 PP6M176118 AH6M415001 NC6M176120 NC6M176121 SB6M665072 425C PE7M176066 PP7M176091 PP7M176094 ** NC7M176124 ** SB7M665297 Cool Gray 5C PE7M176067 PP7M176089 ** AH7M415001 NC7M176125 NC7M665175 SB7M665295 7502C PE8M176048 PP8M176058 ** ** NC8M176058 ** SB8M664871 463C/731C PE8M176049 PP8M176060 ** ** NC8M176059 ** SB8M664869 Black C PL9M176008 PP9M176017 ** ** NC9M176008 NC9M176009 SB9M664896 颜色可能与显示的实际颜色有所不同。

Base Resin PC PC/PSU PES PEI PP ABS PEEK PA Barrel Temperatures* °F (°C) Rear Zone 530–560 (277–293) 550–575 (288–302) 660–700 (349–371) 675–725 (357–385) 390–420 (199–216) 425–460 (219–238) 680–730 (360–388) 430–500 (221–260) Center Zone 515–560 (269–288) 540–565 (282–296) 650–690 655–710 (352–377) 380–405 (193–207) 415–450 (213–232) 670–710 (354–377) 420–490 (216–254) Front Zone 510–525 (266–274) 530–555 (277–291) 640–680 (338–360) 655–700 (346–371) 370–395 (188–202) 405–440 (207–227) 410–480 (210–249) Nozzle 520–535 (271–280) 540–565 (282–296) 650–690 665–710 (352–377) 380–400 (193–204) 415–450 (213–232) 660–700 (349–371) 420–490 (216–254) Melt Temperature 525–560 (274–293) 530–580 (277–304) 650–700 (343–371) 660–730 (349–388) 375–395 (191–202) 410–460 (210–238) 650–730 (343–388) 420–500 (216–260) Mold Temperature 175–250 (80–121) 160–220 (71–104) 280–350 (138–177) 275–350 (135–177) 100–135 (38–57) 150–180 (66–82) 300–425 (149–219) 160–230 (71–110) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 0.5–2.0 Back Pressure psi 50 Screw Speed rpm 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70** Drying Parameters °F (°C) 6 hrs @ 250 4 hrs @ 250 4 hrs @ 275 (135) 4 hrs @ 250 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.0:1–2.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 * A reverse temperature profile is important to obtain optimum conductive properties. Cut vent depths to: - PC Compounds: 0.001"–0.002" depth and 0.250" width - PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PEI Compounds: 0.001"–0.003" depth and 0.250" width - PP Compounds: 0.001"–0.002" depth and 0.250" width - ABS Compounds: 0.0015"–0.0025" depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" min. depth and 0.250" width • Increase vent depth to 0.040" (1.0mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD 5024 RS HI 5021 RS S1 5021 RS X2 5019 X1 LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS LB3300- 5005 RS REC LB3220- 5001 RS C Natural X1 5010 GP Grey 5006 RS PE 5004 RS PE LB4200- 5022 Black LB4200- 5023 Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs.

海蓝色 适用于汽车电线的 ONCOLORTM 解决方案 适用于交联材料如 XLPE 的 EVA 色母料，以及适用于 T1、T2 和 T3 耐热等级要求的 PVC 色母料 建议使用量为 1-2%，使用量可能因具体用途、工艺、设备和树脂级别不同而存在差异 海蓝色 蓝色 (浅蓝) 适用于通信电缆和光缆应用的 PVC 和 PBT 色母料 适用于发泡和固体绝缘应用的 PE 色母料 为交联材料如 XLPE 专门设计的 EVA 色母料 所有材料建议使用量为 1-2%，使用量可能因具体用途、工艺、设备和合成树脂级不同而存在差异 适用于通信线缆应用的 ONCOLORTM 解决方案 海蓝色 蓝色 (浅蓝) 海蓝色 海蓝色 适用于室外线缆应用的抗紫外色母料 建议 PE 材料使用量为 2%，PVC 材料使用量为 3%，使用量可能因具体用途、工艺、设 备和树脂级别不同而存在差异 www.avient.com 版权所有© 2020埃万特公司。

功能 目标应用 血液采集 试剂容器/ 试剂盒 移液器/ 器具 设备/配件 即用型配方避免对分析测试的干扰； 可萃取金属数据          聚合物对激光能量的激活可提供高 对比度、无溶剂的 高速鉴别     定制母粒和即用型配方可提供 透明和不透明颜色，同时允许激光 传输/吸收    PE和PP的新一代快速成核剂；提 高尺寸稳定性，热性能和机械性能  降低湿蒸汽透过率（MVTR） HDPE即用型配方 吸湿母粒 减少 BCT（血液收集管）中因氧传 输造成的真空损失，并保护试剂免 受氧化降解 在290-450nm波长范围内阻挡紫 外线，对透明度没有影响；保护光 敏试剂     自检/即时检验 （POCT） 用于实验室自动化/ 鉴别编码的着色剂 颜色—低迁移/减 低干扰 颜色—生物相容 性评估 透明PP PP、ABS、 PC/ABS的抗静电 性能 激光焊接可 快速、可靠地组装 一系列聚合物 半结晶聚合物 的成核剂，例如 HDPE、PP、POM 防止氧气进入的 PET吸氧剂 透明容器（PP、 PE、PETG、COP） 中的紫外光防护 防潮以改善屏障 激光打标的UDI替 代油墨印刷/贴标 PP、ABS、PC和 高温聚合物的颜 色，符合UL认证 为各种聚合物提供多种颜色，能够 为您的工艺提供适用的即用型配方 或母粒 降低不符合现行和拟定法规（如 IVDR）的风险 即用型解决方案/母粒支持针对电器 外壳的UL要求 永久性/非迁移性即用型配方；不受 相对湿度（%）影响的快速静电衰 减时间 不含山梨醇，最大限度地减少潜在 迁移 1.844.4AVIENT www.avient.com 版权所有© 2021埃万特公司。

We wanted to make it easier for our customers to create durable piping systems by developing a plastic flapper valve that could be easily fused onto polyethylene (PE) pipe.

KEY FEATURES • Formulated with 58–80% fiber by weight • Available in rolls of 25 in/63.4 cm wide unidirectional tape, slit widths available up to 2 in/5 cm • Easily recyclable compared to thermoset composites FIBERS FOR POLYSTRAND TAPES • Fiberglass THERMOPLASTIC RESINS • PP • PE • PETG • aPET • PA6 KEY APPLICATIONS • Building & Construction • Automotive • Consumer & Recreation • Oil & Gas PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Compared to rubber and silicone alternatives they simplify manufacturing with single-step fabrication, reducing the energy used in production and can be overmolded directly onto non-polar polymer substrates such as polypropylene (PP) and polyethylene (PE).

SOLUTIONS FOR FIBER OPTIC CABLE Engineered Fibers, Color & Additives, Specialty Engineered Materials BINDER YARN Flat, low-profile Highly absorbent (up to 65x its weight) BUFFER TUBE SWELLABLE YARN Cleaner than gel Highly absorbent WATER SWELLABLE FRP Non-corrosive, non-conductive, No flaking or shedding Overcoat and upjacketing available STRENGTH MEMBER Aramid or fiberglass yarn Processes cleanly with minimal dust UNDER-SHEATH RIPCORD Swellable, non-wicking Available in colors for easy identificationLASER MARKING ADDITIVES Provide good contrast in black outer jacket for outdoor exposure JACKET Color formulations for PVC, PE, TPU, TPC UV protective additives Non-halogenated colors for LSFOH LSFOH UV formulations for high flame retardancy, chemical and UV resistance, low COF TPE Polyamide, custom polyolefins LOOSE TUBES, TIGHT BUFFERS AND MICRO-MODULES LSFOH UV formulations for improved processing speeds, strippability & gel resistance Customized formulations: PBT PP TPE Color formulations for polyamide, PBT, LSFOH , TPE, TPC (Thermoplastic Copolyester) Laser marking additives https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/ripcords-fiber-optic-cable https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/water-blocking-absorbing-yarn https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/water-blocking-absorbing-yarn https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/fiber-reinforced-polymer https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/strength-members https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/ripcords-fiber-optic-cable https://www.avient.com/products/polymer-additives/performance-enhancement-additives/oncap-laser-marking-additives https://www.avient.com/products/polymer-additives/uv-and-light-blocking-additives/oncap-uv-stabilizer-additives https://www.avient.com/products/thermoplastic-elastomers/onflex-thermoplastic-elastomers https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/bergadur-polyester-formulations https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations https://www.avient.com/products/thermoplastic-elastomers/onflex-thermoplastic-elastomers https://www.avient.com/products/polymer-additives/performance-enhancement-additives/oncap-laser-marking-additives