Processing Guidelines Base Resin PA6 Barrel Temperatures °F °C Rear Zone 440–470 227–243 Center Zone 450–480 232–249 Front Zone 460–490 238–254 Nozzle 470–500 243–260 Melt Temperature 470–500 243–260 Mold Temperature 120–180 49–82 Pack and Hold Pressure 50–75% of Injection Pressure Injection Velocity 0.5 in/s–3 in/s 13 mm/s–76 mm/s Back Pressure 50–100 psi 3.4–6.9 Bar Screw Speed 30–70 rpm Cushion 0.25 in 6.35 mm Drying Parameters 2–4 Hours @ 180°F 2–4 Hours @ 82°C Moisture % Allowable 0.08–0.18%* Screw Type General Purpose Screw Screw Compression Ratio 2.0:1– 2.5:1 Screw L/D 20:1 Non-return Check Valve Free Flow Check Ring Nozzle Type Reverse Taper Clamp Pressure 2–3 Tons/in² Barrel Capacity 30-80% of barrel should be used * Avient suggests measuring moisture using a Karl Fischer method or Vapor Pro® moisture analyzer that titrates only for moisture. Gate thickness should be 50–75% of wall thickness 3.

TPE-1 and TPE-2 have a hardness of 45 and 50-55 Shore A, respectively. The adhesion strength, i.e., peel strength, is measured by the force required to pull the elastomer from the substrate and is reported as an average or a maximum strength over 50 mm of pulling. TPE-1 and TPE-2 have a hardness of 45 and 50-55 Shore A, respectively.

For more than 50 years, closurelogic GmbH has been manufacturing aluminum closures in Germany. The company is headquartered in Worms, Germany, with subsidiaries in Spain and Turkey supplying more than 50 countries worldwide.

PRODUCT BULLETIN 1.00E+00 1.00E+02 1.00E+04 1.00E+06 1.00E+08 1.00E+10 1.00E+12 1.00E+14 1.00E+16 1.00E+18 0 10 20 30 40 50 60 70 R e si si ti v it y /O h m Silcosperseä EC dosing percentage (%) CB HCR SWCNT HCR SWCNT LSR MWCNT HCR aceSurface Resistivity Silcosperse™ EC Electrically Conductive Additive Dispersions Silcosperse™ EC Electrically Conductive additive dispersions provide varying levels of electrical conductivity to silicone material. CB is also available as a European food regulation compliant grade. 0 10 20 30 40 50 60 70 1.00E+18 1.00E+16 1.00E+14 1.00E+12 1.00E+10 1.00E+08 1.00E+06 1.00E+04 1.00E+02 1.00E+00 INSULATIVE ANTISTAT DISSIPATIVE CONDUCTIVE KEY CHARACTERISTICS • Delivers a range of properties from anti-static through conductive • Achieves greater conductivity levels with lower loadings in single- and multi-wall nanotubes • Anti-static performance available at lower doses • Dark color options, such as browns, blues or reds, available at lower dosages in single-wall nanotubes • Suitable for peroxide- or platinum-cured silicone formulations MARKETS AND APPLICATIONS Silcosperse EC Electrically Conductive additive dispersions are found in a variety of markets, including transportation, energy, electrical & electronics, and the films & coatings industry.

Amosorb 4020R improves the aesthetics of recycled packaging in terms of haze and color, and also maintains performance levels irrespective of the level of rPET used, delivering consistent results at all levels of rPET; 25%, 50% and 100%. KEY BENEFITS • Consistent performance with all levels of rPET; 25%, 50% and 100% • Improved haze and color • Can be used with many different resin/grades • Non-nylon based • Simple to use with existing mono-layer equipment • Suitable for use on multi-layer machines Sustainability Spotlight Recycle Solutions TARGET MARKET & APPLICATIONS PET and rPET rigid packaging for food & beverage REGULATORY ColorMatrix Amosorb 4020R meets direct food contact regulatory requirements in major markets.

COLORANT CHROMATICS HIGH-TEMPERATURE POLYMER FORMULATIONS PRODUCT SELECTION GUIDE COLORANT CHROMATICS HIGH TEMPERATURE COMPOUNDS PROPERTY ISO Test Method Units PES PPSU PEI LCP PEEK PSU PHYSICAL Density 1183 — 1.37 1.29 1.27 1.40 1.30 1.24 Mold Shrinkage Flow/X-flow 294–4 % 0.8/0.85 0.7/XX 0.6/0.7 0/0.7 1.0/1.3 0.7 MECHANICAL Tensile Strength 527 Mpa 85 70 85 200 100 70 Tensile Elongation Yield 527 % 7 7.5 6 — — 6 Tensile Elongation Break 527 % >25 >60 60 3 30 >50 Izod Notched 180 kJ/m2 7 55 5 95 7 5.5 THERMAL HDT 1.8 MPa 75 °C 205 200 190 190 150 175 FLAMMABILITY Flame Rating UL-94 — V-0 V-0 V-0 V-0 V-0 HB ADDITIONAL Steam Sterilizable — Cycles 100 2000 2000 1500 1000 100 CUSTOM OPTIONS Color — — Yes Yes Yes Yes Yes Yes Reinforced — — Yes Yes Yes Yes Yes Yes Conductive — — Yes Yes Yes Yes Yes Yes Lubricated — — Yes Yes Yes No Yes Yes Radiopaque — — Yes Yes Yes No Yes Yes Trade Names — — Veradel Ultrason E Radel Ultrason P Ultem Vectra Zenite Xydar KetaSpire Victrex Vestakeep Udel Ultrason S Avient high temperature precolored and specialty compounds are your solutions for high performance products. Whether the volume is measured in bags or tons, with minimum order quantities down to 50 pounds, Avient is the innovative partner for your business.

50 psi).1 Use 50 percent to 75 percent of the injection pressure for the pack and hold pressure. A GFRP usually is between 10 percent to 50 percent glass fiber by weight. Experts recommend using inserts for large-volume production, and because a long dwell time in the barrel may cause degradation, use a minimum of 20 percent to 50 percent of barrel capacity per shot.1 Purging is also important.

REDUCED WEIGHT 40–50% weight reduction when switching from metal, portability SOLUTION: Long carbon fiber reinforced composites SUSTAINABILITY PIR/PCR content incorporation SOLUTION: Recycled content long fiber thermoplastics STRENGTH IN EXTREME ENVIRONMENTS High strength-to-weight ratio, high and low temperature performance SOLUTION: Long carbon fiber reinforced composites CORROSION RESISTANCE Metal replacement, eliminate secondary operations, slow moisture uptake SOLUTION: Moisture resistant long fiber reinforced nylons ELECTRIFYING STRENGTH Ignite a passion for exploration and push the boundaries of durability with long fiber thermoplastic technology for bikes, engineered to excel in extreme challenges!

© 2019, All Right Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 TRANSPORTATION LIGHTING SUPPLIER H E A T S I N K F O R H I G H P O W E R L E D • A material to replace aluminum • High thermal conductivity - 20 W/mK • Electrically conductive • Increase production rate by 50%, as three secondary operations were eliminated • Reduced the weight of each part by 30% • Collaborated with the customer to participate in the SPE Automotive Innovation Awards Therma-Tech™ TT6600-5001 EC Grey KEY REQUIREMENTS WHY AVIENT?

MEDICAL EQUIPMENT MANUFACTURER S U R G I C A L X - R A Y G L A S S E S • Replace lead while providing uniform shielding performance • Radiation shielding up to 140KeV • Improve glasses design • Compliance with Radiation Protection Regulation: Adult eye exposure must be below 20 mSv per calendar year • Conducted extensive testing to ensure comparable and uniform shielding performance • Improved geometric flexibility • Lowered shielding component costs 30-50% by eliminating machining and assembly steps (associated with lead) • Reduced weight of the glasses and enabled a more ergonomic design • Eliminated disposal concerns associated with lead Trilliant™ XR Lead Replacement Thermoplastics KEY REQUIREMENTS WHY AVIENT?