• Custom sizes, profiles, tooling design and prototyping available for specific applications USES AND APPLICATIONS Transportation - Automotive chassis, automotive body panels, marine stringer systems, floor strengthening and stability reinforcement Consumer - Watersports paddles, sporting goods sticks, tent poles, fishing rods, archery bow limbs and arrow shafts, bicycle frames, sail battens Infrastructure & Construction - Bridge support and retrofitting repair, support beams, concrete reinforcement Healthcare - Orthopedic external fixators Energy - Wind turbine blades and stiffeners PRODUCT BULLETIN Property CFRP Barstock, Laminates & Pultruded Profiles Resin Epoxy, Vinyl ester Tensile Strength 400–500 ksi 2758–3447 MPa Flexural Strength 130–350 ksi 896–2413 MPa Flexural Modulus 18–22 msi 124–152 GPa Glass Transition Temperature 149–320 °F 65–160 °C Density 0.056–0.060 lb/in3 1.54–1.65 g/cm3 TECHNICAL PROPERTIES (Typical Values) 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

Examples include: • Dyneema®, the world’s strongest fiber™, enables unmatched levels of performance and protection for end-use applications, including ballistic personal protection, marine and sustainable infrastructure and outdoor sports • Unique technologies that improve the recyclability of products and enable recycled content to be incorporated, thus advancing a more circular economy • Light-weighting solutions that replace heavier traditional materials like metal, glass and wood, which can improve fuel efficiency in all modes of transportation and reduce carbon footprint • Sustainable infrastructure solutions that increase energy efficiency, renewable energy, natural resource conservation and fiber optic / 5G network accessibility Avient is certified ACC Responsible Care®, a founding member of the Alliance to End Plastic Waste and certified Great Place to Work®.

They are constructed from layers of 0°/90° woven E-glass fiber reinforcements combined with a proprietary resin system in a continuous pultrusion manufacturing process.

EDGEGLO YELLOW SHOT GLASS WILLOW WHITE PP PP FR 8-6 LMS-1000

GLASS PG900070QPMBR PG 900070 WT PP SL PP FR 8-6 LMS-1000

Avient will also feature the latest Mevopur™ Healthcare Bio-based Polymer Solutions from its portfolio, with a new standard color range centered on bio-based polypropylene (bio-PP). This new pre-tested bio-PP standard color range can help manufacturers speed up their product development cycle and increase the sustainability of their products. Light-weighting solutions that replace heavier traditional materials like metal, glass and wood, which can improve fuel efficiency in all modes of transportation and reduce carbon footprint

X HC 5210-0020 Natural Glass PP PP FR 8-6 LMS-1000

It is specially formulated for polypropylene (PP), polyethylene (PE), polyethylene terephthalate (PET), and Nylon.  The GRS-certified color and additive solutions from Avient contain a required percentage of pre-consumer or post-consumer recycled polyester primarily from recycled PET, Nylon, PP, PE, and other resin bases that aim to save on energy and water use during the spin-dyeing (dope-dyeing) process.  Light-weighting solutions that replace heavier traditional materials like metal, glass and wood, which can improve fuel efficiency in all modes of transportation and reduce carbon footprint  

On the Create Advance Ship Notice page, fill in the mandatory fields (marked with a red asterisk). 5 Click on the Submit button to send the ASN to Avient, or on the Update button if you are sending an updated ASN.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix.