Every subsequent lot is internally tested in comparison with the standard and is accompanied by a Quality Control Report. Our laboratories are equipped with quality instrumentation to test all necessary parameters to ensure the highest quality product suitable for the application and to fulfill customer requirements. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

TYPICAL PROPERTIES - MULTI-AXIAL LAMINATES 0° Testing Orientation 90° Testing Orientation Product Name Resin Fiber Content Laminate Layers & Orientation Areal Weight Nominal Thickness1 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0/90 0.20 29.49 1000 0.031 0.79 - - - - 2020 13.9 59.7 412 - - - - 2020 13.9 59.7 412 0/90/0 0.31 44.24 1500 0.045 1.14 2250 15.5 46.4 320 3070 21.2 79.4 547 186 1.3 9.7 67 1330 9.2 39.6 273 0/90/90/0 0.41 58.98 2000 0.057 1.45 2000 13.8 44.0 303 2400 16.5 60.6 418 496 3.4 20.7 143 2210 15.2 56.4 389 6531 65 0/90 0.10 14.80 502 0.014 0.36 - - - - 2240 15.4 60.9 420 - - - - 2240 15.4 60.9 420 0/90/0 0.15 22.20 753 0.020 0.50 2650 18.3 58.3 402 3100 21.4 82.8 571 280 1.9 NB2 NB2 1670 11.5 42.5 293 0/90/90/0 0.21 29.61 1004 0.027 0.68 2260 15.6 51.5 355 2470 17.0 62.2 429 580 4.0 30.4 210 2310 15.9 59.6 411 6536 0/90 0.14 20.71 702 0.021 0.53 - - - - 1980 13.7 60.5 417 - - - - 1980 13.7 60.5 417 0/90/0 0.22 31.06 1053 0.029 0.74 2309 15.9 48.3 333 2730 18.8 81.5 562 245 1.7 13.0 90 1490 10.3 44.3 305 0/90/90/0 0.29 41.41 1404 0.037 0.94 2164 14.9 47 324 2170 15.0 59.6 411 512 3.5 25.4 175 2340 16.1 71.2 491 6538 0/90 0.27 39.54 1341 0.034 0.86 - - - - 2220 15.3 60.0 414 - - - - 2220 15.3 60.0 414 0/90/0 0.41 59.53 2018 0.057 1.44 2825 19.5 40.9 282 2780 19.2 67.6 466 218 1.5 10.2 70 1410 9.7 40.0 276 0/90/90/0 0.55 79.37 2691 0.073 1.85 1880 13.0 32.4 223 2060 14.2 54.0 372 478 3.3 18.0 124 2360 16.3 61.0 421 7034B PP-Black 70 0/90 0.14 20.48 694 0.016 0.40 - - - - 2680 18.5 62.0 427 - - - - 2680 18.5 62.0 427 0/90/0 0.21 30.72 1041 0.028 0.71 1750 12.1 55.9 385 3710 25.6 75.1 518 160 1.1 11.3 78 1440 9.9 36.2 250 0/90/90/0 0.28 40.95 1388 0.036 0.90 1700 11.7 40.4 279 2800 19.3 55.7 384 432 3.0 25.4 175 2350 16.2 52.4 361 6020 PE 60 0/90 0.17 23.90 810 0.023 0.57 - - - - 1830 12.6 52.00 359 - - - - 1830 12.6 52.0 359 0/90/0 0.25 35.86 1216 0.033 0.84 2265 15.6 40.0 276 2740 18.9 68.2 470 181 1.2 10.0 69 1350 9.3 35.3 243 0/90/90/0 0.33 47.81 1621 0.044 1.12 1810 12.5 30.0 207 2000 13.8 48.0 331 502 3.5 22.0 152 1820 12.5 46.0 317 6621 66 0/90 0.19 27.94 947 0.025 0.65 - - - - 2280 15.7 60.0 414 - - - - 2280 15.7 60.0 414 0/90/0 0.29 41.90 1421 0.040 1.01 2490 17.2 37.0 255 2900 20.0 70.0 483 165 1.1 9.7 67 1440 9.9 38.0 262 0/90/90/0 0.39 55.87 1894 0.053 1.35 1810 12.5 29.0 200 2160 14.9 58.0 400 508 3.5 21.0 145 2170 15.0 53.0 365 5843 PETG 58 0/90 0.16 23.70 804 0.020 0.50 - - - - 2050 14.1 59.6 411 - - - - 2050 14.1 59.6 411 0/90/0 0.25 35.55 1205 0.030 0.76 2800 19.3 89.0 614 2900 20.0 78.0 538 397 2.7 NB2 NB2 1580 10.9 42.5 293 0/90/90/0 0.33 47.40 1607 0.039 0.99 2540 17.5 72.0 496 2300 15.9 57.7 398 780 5.4 35.0 241 2170 15.0 63.0 434 5840B aPET-Black 58 0/90 0.18 26.01 882 0.021 0.53 - - - - 2530 17.4 55.3 381 - - - - 2530 17.4 55.3 381 0/90/0 0.27 39.01 1323 0.032 0.82 2986 20.6 91.1 628 3160 21.8 68.7 474 252 1.7 20.0 138 1580 10.9 36.9 254 0/90/90/0 0.36 52.01 1763 0.042 1.07 3065 21.1 73.1 504 2570 17.7 54.2 374 813 5.6 37.0 255 2440 16.8 55.6 383 5860B PA6-Black 58 0/90 0.16 22.95 778 0.021 0.52 - - - - 2190 15.1 56.00 386 - - - - 2190 15.1 56.0 386 0/90/0 0.24 34.43 1167 0.034 0.86 2510 17.3 117.0 807 2760 19.0 63.7 439 657 4.5 22.2 153 1630 11.2 39.7 274 0/90/90/0 0.32 45.91 1556 0.046 1.18 2210 15.2 106.0 731 2090 14.4 45.6 314 1110 7.7 50.8 350 2150 14.8 57.4 396 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. Contact Avient with your specific requirements. 2 No break occurred in testing. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

KEY BENEFITS • Very good compatibility and dispersibility • Durable fire resistance with limited to no impact on color • Fire resistance and spinnability tested for efficacy in our labs • Can be combined with colors and with other additives (e.g., light stabilizers) into a single product for convenience PRODUCT BULLETIN Copyright © 2022, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

KEY CHARACTERISTICS • High-wearing comfort and elastic recovery • Strong and seamless adhesion to polyester and nylon fabrics • Passed OEKO-TEX 100-2 testing • Excellent washability at up to 60°C • Non-toxic formulations with low volatile organic compounds (VOC) and without added plasticizers • Attractive alternative to conventional TPU adhesive film and glue MARKETS & APPLICATIONS Versaflex TF Adhesive TPE solutions have been custom engineered for: • Elastic strips in underwear • Seam tapes in sports and fitness apparel PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

After extensive testing, including mechanical testing to ISO 10328 standards and a six-month participant clinical trial, WillowWood introduced DuraWalk™, their most advanced low-activity foot.

You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com TEST STANDARD UNIT SYNCURE™ XLPE S1054A ROHS NATURAL Specific Gravity ASTM D1505 – 0.919 Melt Flow Index, 190°C/2.16kg ASTM D1238 g/10min 1.045 Tensile Strength at Break ASTM D638 psi 2500 Tensile Elongation at Break ASTM D638 % 450 Delta Torque Internal g-m 2154 Moisture Content ASTM D2974 % 0.0004 Gel Content ASTM D2765 % 73 Hot Creep Elongation UL 2556 % 49 Hot Deformation UL 2556 % 6 TECHNICAL PROPERTIES *Gel Content, Hot Creep Elongation and Hot Deformation measured on 95 phr S1054A / 5 phr S100B system, and cured by autoclave for 9 hours

You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. TECHNICAL PROPERTIES(1) TEST METHOD Edgetek™ ET8900-0011 HI UV NAT Edgetek™ ET8900-0012 HI UV White Edgetek™ ET8900-0013 HI UV Black Physical Density/Specific Gravity ASTM D792 1.13 g/cm3 1.15 g/cm3 1.13 g/cm3 Molding Shrinkage - Flow ASTM D955 1.4–2% 1.4–2% 1.4–2% Mechanical Tensile Strength (Yield) ASTM D638 5,900 psi 5,800 psi 5,800 psi Tensile Modulus(2) ASTM D638 169,000 psi 161,087 psi 176,000 psi Flexural Modulus(3) ASTM D790 187,000 psi 190,985 psi 188,000 psi Impact Notched Izod Impact 73°F (23°C), 0.125 in ASTM D256A 17.3 ft-lb/in 16.5 ft-lb/in 16.5 ft-lb/in Notched Izod Impact -22°F (-30°C), 0.125 in ASTM D256A 3.2 ft-lb/in 3.0 ft-lb/in 3.3 ft-lb/in Thermal (HDT) 66 psi (0.45 MPa), 0.125 in ASTM D648 121°C 135°C 129°C NORTH AMERICA GRADES (1) Data based on single lot of lab generated samples.

They also provided local support during the sampling process, which helped speed testing and development time for Victorinox. Avient provided product development assistance and testing, and ultimately delivered customized materials that met strict requirements for durability.

Avient was able to identify a local supplier of dependable laser-marking equipment, and ran tests on the machinery so the customer could calculate its output rates and also judge the level of marking contrast. THE IMPACT After the test, the manufacturer incorporated the Smartbatch™ four-feature formulation into its polymer compound.

PRODUCT BULLETIN KEY BENEFITS Avient’s antimicrobial concentrates for fiber applications provide the following benefits: • High active-ingredient loading which translates to excellent efficacy at low let-down ratios • Easily withstand 50 washings in ISO 20743 standard tests • Also applicable for bi-component technology • Low levels of abrasiveness means higher process performance—reducing cost in the spinning phase • Can be combined with colors and with other additives (e.g., flame retardants) into a single combination concentrate for convenience • Product guidance and technical assistance from our experts Copyright © 2022, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.