Producing a material that achieves all these at a thin coating thickness is a challenge.

Producing a material that achieves all these at a thin coating thickness is a challenge.

The supplier molds two housing components using a 20 percent talc-filled polypropylene — one for the HVAC parts and one for the blower motor — then assembles all of the components to produce a single module.

Avient’s solution was a unique, nylon-based material that met the all of the application’s performance requirements.

He will be responsible for driving collaboration across all of our business units to best serve multinational accounts,” added Mr.

All rights reserved. All rights reserved. 38223Certificate No: 0313794IATF No: Facility: 1260 Carden Farm Drive Clinton, TN 37716 Activity: Warehousing & Distribution Facility: Avon Lake Engineered Materials Producer Services Division Suppor 33587 Walker Road Avon Lake, OH 44012 Facility: 33587 Walker Road Avon Lake, OH 44012 Activity: Logistics, Purchasing, Customer Service & Strategic Planning Activity: Logistics, Purchasing, Customer Service & Strategic Planning

These power stations sidestep high land costs and remove all obstacles to light absorption. © 2020, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012

It takes various forms, such as slavery, servitude, forced and compulsory labour and human trafficking, all of which have in common the deprivation of a person's liberty by another in order to exploit them for personal or commercial gain. A full copy of Avient’s Code of Conduct is available in over 20 languages and can be found here: Avient’s Position on Human Rights can be found here http://www.avient.com/ https://www.avient.com/company/policies-and-governance-0/code-conduct https://www.avient.com/sites/default/files/2021-07/avient-human-rights-position-statement-updated-july-2021.pdf Page 2 of 3 Training To mitigate against the risk of non-compliance with our policy, Avient requires all associates to complete mandatory Code of Conduct training. Our procurement and compliance teams will continue to focus on identifying and addressing any potential risks in our supply chain and the business will continue to provide awareness and training to all of its employees.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

From the Select Customer drop-down list in the top right corner, select Avient. 2 The Purchase Orders table will display the following information for all the POs received from Avient: Column Description PO Number PO number generated by Coupa. You can see all comments when you open the PO. The Purchase Order Lines table shows the following information for all the PO lines: 4 For your custom view, you also add the following additional information: ASN lines, carrier, confirmed quantity, delivery date, invoiced, line level text, need by date, received, ship method, ship note, shipment date, shipped quantity, and tracking number.