You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Available as additive concentrates, ready-to-use additive formulations or ready-to-use additive/ colorant formulations for different polymers REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request; exceptions may occur Healthcare use limitations apply—see below. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Proprietary composite formulations and technologies prevent voids and produce high-quality cores that withstand stringent electrical testing and end-use manufacturing stresses such as thermal overmolding and mechanical crimping. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

KEY PERFORMANCE PROPERTIES1 PHYSICAL NOMINAL VALUE UNIT TEST METHOD Density/Specific Gravity 1.00 ASTM D792 Melt Mass-Flow Rate (MFR) (230°C/2.16kg) 20 g/10 min ASTM D1238 MECHANICAL Tensile Strength 15.0 MPa ASTM D638 Flexural Modulus 1400 MPa ASTM D790 Flexural Strength 35.0 MPa ASTM D790 IMPACT Notched Izod Impact (Injection Molded) 150 J/m ASTM D256 ELECTRICAL Surface Resistivity < 100000 ohms/sq ASTM D257 PROCESSING INFORMATION INJECTION NOMINAL VALUE UNIT Drying Temperature 80 to 90 °C Drying Time 4.0 to 6.0 hr Processing (Melt) Temperature 220 to 250 °C Mold Temperature 30 to 80 °C Trilliant™ HC Electrically Conductive Formulations for Precision Performance Pipette Tips A critical design consideration for pipette tips is the accurate measurement of finite amounts of liquid. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Consistent Dk Quality – Dk values can be tested to verify consistency. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. KEY CHARACTERISTICS ECCOH 5924FORMULATION ECCOH 5981 FORMULATION ECCOH 5983 UV FORMULATION Material Standards BS7655-6, 1 (LTS1–4), BS6724, IEC 60502 BS7655-6, 1 (LTS3) BS7655-6, 1 (LTS1–4) Tear Strength at 23°C 7.7 N/mm 10 N/mm 11 N/mm Tear Strength at 65°C 2.3 N/mm 5 N/mm 6.5 N/mm Hot Pressure Test (6h at 90°C) 39% –

PRODUCT BULLETIN PROPERTY TEST METHOD TYPICAL VALUE (ENGLISH) TYPICAL VALUE (SI) Specific Gravity ASTM D-792 11.0 11.0 Tensile Modulus1 ASTM D-638 1.20E+6 psi 8270 MPa Tensile Strength1 (Yield) ASTM D-638 3,950 psi 27.2 MPa Flexural Modulus ASTM D-790 800,000 psi 5520 MPa Flexural Strength ASTM D-790 7,000 psi 48.3 MPa Notched Izod Impact2 ASTM D-256A 2.1 ft•lb/in 110 J/m Deflection Temperature Under Load 66 psi (0.45 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 280°F 138°C Deflection Temperature Under Load 264 psi (1.8 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 190°F 87.8°C TECHNICAL PROPERTIES 1 Type I, 0.20 in/min (5.1 mm/min) 2 73°F (23°C), 0.125 in (3.18 mm), Injection molded www.avient.com Copyright © 2020, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. ACTIVE INGREDIENTS RESISTANCE RATING Clorox® Disinfecting Wipes 5813-79 Quaternary ammonium +++++ +++++ +++++ ++ +++ ++++ Formula 409® Heavy Duty Degreaser N/A Lauramine oxide, ethanolamine +++++ +++++ +++++ + ++ +++ Lysol® All-Purpose Cleaner 777-66 Quaternary ammonium +++++ +++++ +++++ + + ++ $$$ $$$ $$$$ $ $$$ $ MATERIAL COMPARISON WITH COMMON CONSUMER DISINFECTANTS FR P C/ AB S FR P C/ P ET FR P C/ P BT Ed ge te k™ E T8 90 0 CR Ed ge te k™ E T8 90 0 H I C R Ed ge te k™ E T8 92 0 FR C RCRITERIA FOR RESISTANCE RATING + strength and elongation at yield retention between 90-110% + strength and elongation at yield retention between 75-125% + no statistically significant reduction in elongation at break (p < 0.05) + visual observation score of 4 or better (minor/no crazing, no cracks) + samples survived disinfectant exposure in strain jig Lysol® is a trademark of Reckitt Benckiser LLC Formula 409® is a trademark of The Clorox Company Clorox® is a trademark of The Clorox Company An independent, A2LA-accredited lab tested the following polymers with various disinfectants to help customers choose the material suitable for their specific application requirements.

TECHNICAL BULLETIN Characteristics Artisan™ Nylon Solution Painted Metal Painted Plastic Traditional Molded-in Color Impact Modified Nylon PA Ionomer Alloy Aesthetic Very Good Excellent Excellent Good Very Good Very Good Scratch Appearance Excellent Poor Poor Good Excellent Excellent Scratch & Mar Resistance Very Good Excellent Excellent Poor Very Good Excellent Color Customization Good Excellent Excellent Very Good Good Good Stress Whitening Excellent Fair Fair Poor Excellent Excellent Weatherability Good Excellent Excellent Very Good Good Very Good Temperature Performance Good Excellent Fair Fair Fair Good Corrosion Resistance Excellent Fair Excellent Excellent Excellent Excellent Processability One Step Multi Step Multi Step One Step One Step Complex One Step Total Production Cost $$$ $$$$$ $$$$ $$ $$$ $$$$ Order Quantity Restrictions Some Some Some None More More COMPARISON OF NYLON, METAL, AND PLASTIC Properties Test Method Artisan™ AR6000-0007 HI UV* Gloss Level** Gloss reading at 60 degrees 80-93 Molding Shrinkage – Across Flow ASTM D955 0.009 to 0.013 in/in Tensile Strength (Yield) ASTM D638 7300 psi Tensile Strength (Break) ASTM D638 5300 psi Tensile Elongation (Yield) ASTM D638 6.0% Flexural Modulus ASTM D790 270500 psi Flexural Strength (Yield) ASTM D790 9950 psi Notched Izod Impact ASTM D256 -4°F (-20°C) 5 ft-lb/in 73°F (23°C) 11 ft-lb/in Unnotched Izod Impact ASTM D256 -4°F (-20°C) 29 ft-lb/in 73°F (23°C) 30 ft-lb/in Color & Aesthetics*** Green, medium blue, dark blue, red, orange, white, gray, black Color customization available based on specific needs KEY PROPERTIES Features: high-gloss finish, UV stability, scratch resistance, chemical/corrosion resistance, cold temperature impact resistance, heat resistance * Reflects average of several colors, properties shift slightly depending on color ** Gloss level varies based on tooling temperature *** UV data available upon request Copyright © 2023, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. The inclusion of these additives can help a cable to pass flame resistance tests, even if the resin originally used is not flame retardant • Cesa™ Light Additives: UV light stabilizers that improve weather resistance and provide long term protection against weather degradation • Semi-conductive TPU formulations to enhance cable performance • Cesa™ Laser Additives: Includes laser-marking additives for durable cable marking.